Wurruk, Victoria, Australia
Wurruk, Victoria, Australia
Skills: Student / Recent Grad
Education: High School/Secondary
Employment Type: Full Time Salaried Employee
Location: Wurruk, Victoria, Australia
In order to apply for this position, applicants MUST meet the following criteria. If your resume does not match these criteria, you will not be able to apply for this position.
Under strict supervision, assists during rigging-up and rigging-down of surface and down hole well logging equipment on work locations for the purpose of recording information about sub-surface geologic formations. Learns basic oil well operations including the identification of different rig types and drill string components, Blow Out Prevention (BOP) procedures and equipment, Health, Safety, and Environmental (HSE) procedures and guidelines, and other appropriate safety and service quality protocols and guidelines. Assists during the operation of well logging equipment at job site. Learns to assemble down hole well logging tools (electric, nuclear, sonic, and other well logging tools). Learns to maintain, clean and perform preventative maintenance on down-hole and surface well logging equipment. Assists in the performance of pre and post job vehicle and equipment inspections and associated paperwork and/or reports. Job tasks, correctly performed, have minimal impact upon the viability of the organization. Error is readily ascertainable by the supervisor and can be corrected. Skills are typically acquired through successful completion of high school or similar education. Licensure to drive commercial equipment is required. Successful completion of Well Control Accreditation Program may be required (some locations). Successful completion of water survival training may be required. Given the nature of oil field service work, the ability to communicate effectively with others is necessary. The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required. Basic reading comprehension and writing skills are required. Basic computer skills are preferred. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Promotes and takes an active part in quality improvement processes. This is the entry level position into the service operator job family.
Halliburton is an Equal Opportunity Employer.
2-10 Herberte court,Wurruk,Vic, Wurruck, Victoria, 3850, Australia
Requisition Number: 66160
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time
Additional Locations for this position:
Compensation is competitive and commensurate with experience.
Founded in 1919, Halliburton is one of the world's largest providers of products and services to the energy industry. With over 50,000 employees, representing 140 nationalities, and operations in approximately 70 countries, the company serves the upstream oil and gas industry throughout the lifecycle of the reservoir – from locating hydrocarbons and managing geological data, to drilling and formation evaluation, well construction, completion and production optimization. Halliburton's fascinating and proud history reveals a continuous focus on innovation and expansion that began with the company's founder, Erle P. Halliburton. After borrowing a wagon, a team of mules and a pump, he built a wooden mixing box and started an oil well cementing business in Duncan, Oklahoma.
In the 1930s, Halliburton established its first research laboratories where the company tested cement mixes, began offering acidizing services to break down the resistance of limestone formations and increase the production of oil and gas, and performed its first offshore cementing job using a barge-mounted cementing unit at a rig in the Creole Field in the Gulf of Mexico. This was the beginning of what was to become the world's most extensive offshore service.
Halliburton took the initial steps toward becoming a worldwide company in 1926. We sold five cementing units to an English company in Burma, the start of our Eastern Hemisphere operations, and Erle P. Halliburton sent his brothers to open our business in Alberta, Canada. We opened in Venezuela in 1940. By 1946, the company – using its innovative technology – had expanded into Colombia, Ecuador, Peru and the Middle East and began performing services for the Arabian-American Oil Company, the forerunner of Saudi Aramco.
In 1951, Halliburton made its first appearance in Europe as Halliburton Italiana SpA., a wholly owned subsidiary in Italy. In the next seven years, Halliburton launched Halliburton Company Germany GmbH, set up operations in Argentina and established a subsidiary in England.
In 1984, Halliburton provided all of the well completion equipment for the first multiwell platform offshore China. Two years later, Halliburton became the first American company to perform an oilfield service job on the China mainland
The final decade of the 20th century brought more changes and growth to Halliburton. The company opened a branch office in Moscow in 1991.
The company realigned its work into Eastern and Western Hemisphere operations in 2006, and in 2007, divided its service offerings into two divisions: Completion and Production, and Drilling and Evaluation.
Today, Halliburton offers the world's broadest array of products, services and integrated solutions for oil and gas exploration, development and production.
To learn more about career opportunities, please visit www.gohalliburton.com.
Halliburton is an equal opportunity employer.
Halliburton placed 2nd in the 2018 Rigzone Ideal Employer Rankings - find out more.