Company: Halliburton
Skills: Electrical Technician, Instrumentation Technician
Experience: 5 + Years
Education: Tech/Vocational Cert/Apprenticeship
Location: Ahmadi, Al Ahmadi Governorate, Kuwait
Status: Active


No location/work authorization restrictions found.

We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.

-

Onshore position UK contract Kuwait 150/30 Day rotation

-

General supervision, maintains electronic instrumentation to provide reliable well maintained equipment to ensure service quality. Responsible for unsupervised control systems support and repair of electro-mechanical equipment at remote customer sites. Assist in overall business management for department. Promote safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Maintain electronic instrumentation to provide reliable well maintained equipment to ensure service quality. Perform routine and preventative maintenance of electronic and electro-mechanical equipment. Perform complex operations using test equipment and surface equipment required to test and calibrate instruments. Assists in supervising others. Provides basic job training and guidance on a regular basis; performs work of same or closely allied nature. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Consequences of error are easily measured and can be confined. Skills are typically acquired through completion of an Apprenticeship, Associate degree or formal vocational training in electronic technology or equivalent and industry experience as Electronic Technician or Electro-Mechanical technician. Must possess a valid driver's license.

-

Maintenance for the following Halliburton PSL-s

Cementing

Coil Tubing

Nitrogen

Wireline

Production Enhancement

-

Working with:

-

Electrical/Electronic

Data Acquisition Systems -RS232, RS422, Profibus, Ethernet

Engine Transmission diagnostic software - Caterpillar, Allison, Detroit

12/24vdc Electronic equipment - pressure, flow, density, level measurement

110/220vac single phase - Lighting, power, control circuits

440vac three phase - Motors, starter panels, Direct On Line, Start Delta, Soft Start

Hazardous area Equipment

Flame proof - EExd

Increased Safety - EExe

Pressurized - EExp

Intrinsically safe - Eexi

Repair and Recalibration of Mechanical Instrumentation

15/20,000psi Gauges

15/20,000psi Chart Recorders

10,000lbs Bulk Scale

Density weight systems

-

Required Skills

Interpret assembly & Schematic drawings

Carry out Installation, scheduled and unscheduled maintenance of electrical and electronic equipment

Diagnoses and Fault rectification

Electrical Inspection and testing on wiring systems

Good interpersonal and communication skills

Can work both individually or as part of a team

Able to plan, prioritize and manage workloads effectively

Comply with all applicable safety, environmental procedures and regulations

-

Qualifications

Minimum Requirements

Modern Apprenticeship SVQ Level 3 in Electrical installations [Electrician] or Equivalent

Must be computer literate

-

Preferable but not essential - Training will be given

HNC Electrical/Electronic Engineering

17th Edition regulations

Compex EX01 to EX04

Offshore Experience

 

Halliburton is an Equal Opportunity Employer.

 

Location

Yard 34, East Ahmadi, Ahmadi, Ahmadi, 61001, Kuwait

 

Job Details

Requisition Number: 47527
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Misc Support
Full Time / Part Time: Full Time

 

 

Founded in 1919, Halliburton is one of the world's largest providers of products and services to the energy industry. With over 50,000 employees, representing 140 nationalities, and operations in approximately 70 countries, the company serves the upstream oil and gas industry throughout the lifecycle of the reservoir – from locating hydrocarbons and managing geological data, to drilling and formation evaluation, well construction, completion and production optimization.  Halliburton's fascinating and proud history reveals a continuous focus on innovation and expansion that began with the company's founder, Erle P. Halliburton. After borrowing a wagon, a team of mules and a pump, he built a wooden mixing box and started an oil well cementing business in Duncan, Oklahoma.

 

In the 1930s, Halliburton established its first research laboratories where the company tested cement mixes, began offering acidizing services to break down the resistance of limestone formations and increase the production of oil and gas, and performed its first offshore cementing job using a barge-mounted cementing unit at a rig in the Creole Field in the Gulf of Mexico. This was the beginning of what was to become the world's most extensive offshore service.

 

Halliburton took the initial steps toward becoming a worldwide company in 1926. We sold five cementing units to an English company in Burma, the start of our Eastern Hemisphere operations, and Erle P. Halliburton sent his brothers to open our business in Alberta, Canada. We opened in Venezuela in 1940. By 1946, the company – using its innovative technology – had expanded into Colombia, Ecuador, Peru and the Middle East and began performing services for the Arabian-American Oil Company, the forerunner of Saudi Aramco.

 

In 1951, Halliburton made its first appearance in Europe as Halliburton Italiana SpA., a wholly owned subsidiary in Italy. In the next seven years, Halliburton launched Halliburton Company Germany GmbH, set up operations in Argentina and established a subsidiary in England.

 

In 1984, Halliburton provided all of the well completion equipment for the first multiwell platform offshore China. Two years later, Halliburton became the first American company to perform an oilfield service job on the China mainland

 

The final decade of the 20th century brought more changes and growth to Halliburton. The company opened a branch office in Moscow in 1991.

 

The company realigned its work into Eastern and Western Hemisphere operations in 2006, and in 2007, divided its service offerings into two divisions: Completion and Production, and Drilling and Evaluation.

 

Today, Halliburton offers the world's broadest array of products, services and integrated solutions for oil and gas exploration, development and production.

 

To learn more about career opportunities, please visit www.gohalliburton.com.

 

Halliburton is an equal opportunity employer.

 

                                       

 

 

Halliburton placed 2nd in the 2018 Rigzone Ideal Employer Rankings - find out more