Company: Wood
Skills: QA / QC / Inspection
Experience: 5 + Years
Education: Bachelors/3-5 yr Degree
Location: Debe, Trinidad and Tobago

Overview / Responsibilities

Massy Wood is currently recruiting for a Quality Assurance / Quality Control Engineer with extensive experience in the oil and gas petrochemical industry.

Job Scope:
  • The Quality Assurance / Quality Control Engineer will assist in the preparation of all quality reports and analysis as required by the contract
  • Focal for NCR Management
  • Focal for Continual Improvement
  • Assist in welding assurance by participating in weld ability activities
  • Focal for RCA and Dispositioning of Client NCRs
  • Coordinate with Subcontractors quality the correct implementation of Subcontractors Quality Programs

  • Prepare all contract reports as per agreed delivery schedules.
  • Gather, analyze and trend data inclusive off but limited to; contract KPIs, NCRs, Weld Defects, LL actions, open risks as per project risk register & Assist and Assure Data.
  • Support Contractor Management Audit Plan
  • Conduct assigned assurance activities in accordance with project approved Gantt Chart
  • Conduct Quality Risk Bow Tie sessions for all critical scopes
  • Plan, prepare and conduct LL sessions in accordance with the project Gannt Chart
  • Ensures, verifies and monitors document traceability and transmittal for construction projects, and makes recommendation for improvement of where necessary
  • Liaises with the engineering department where necessary
  • Validates the approval, distribution and revision of procedures / process
  • Plans work and operations procedures for the overall construction activities
  • Ensures that quality plans and ITP's are completed for all projects
  • Monitors implementation of corrective actions in response to the identification of nonconforming products/services through QA/QC Audits or otherwise, until the unsatisfactory condition has been rectified
  • Coordinate all site inspections with the site subcontractors
  • Ensure that all inspection reports are accurate and that all attached documents are current status
  • Ensure all work is correctly prepared prior to any inspection being undertaken
  • Review all inspection reports for compliance, with reference to applicable codes and standards / procedures
  • Identifies and evaluates Quality-related incidents / problems / non-conformances and initiates, recommends, and provides effective solutions where necessary
  • Coordinate with the site subcontractors' QC inspectors for the resolution of site problems.
  • Assist the site subcontractors in the resolution of drawing interpretation
  • Attend the daily / weekly / monthly operations meetings to ensure QC input
  • Review work procedures and method statements for compliance with good work practices and the customers contract specializations
  • Issuance of non-conformance reports in conjunction with project SPA
  • The review of inspection test packages during the course of construction activities and GOC's with the certification specialist
  • Liaises with the QA team leader in the coordination of all internal quality audits as per approved schedule
  • Manages relationship with subcontracted companies to ensure compliance between subcontracted services and company / client best practices
  • Liaises with HSSE representatives (internal, client & external) to ensure inherent compliance of maintenance documentation with Massy Wood and bpTT safety standards
  • Visits onshore facilities as required to perform QA / QC support as required by the construction team leader or the QA team leader
  • Performs all other related job functions as required

Skills / Qualifications

  • Bachelor's in Construction, Mechanical or Industrial Engineering from a recognised institution
  • Certification / Training in Quality (must be based on ISO 9001:2008) from a recognised institution. (For example CQE, CQA, CQT or CQI)
  • Level I or Level II Radiographic Film Interpretation
  • Certified Welding Inspector (CWI) with AWS
  • Non-destructive Testing such as MT, PT, UT, and VT will be an asset
  • Tested and certified by ASNT (or equivalent nationally recognized program) in the required NDT method(s) specified by the Contract and shall be required to fulfill the full scope of a practicing Level II including, but not limited to: method application, interpretation of results, interpretation of codes and standards, preparation of procedures
  • An acceptable combination of academic qualifications and work experience may be considered in lieu of minimum requirements
  • Minimum five (5) years' experience in the Oil and Gas or Power Generation businesses
  • A working knowledge of Construction / Structural / Inspection codes and practices such as API 570, 620 and 650, ASME B31.3, AWS D1.1, API 1104, ASME Section V and IX. NACE standards, ISO 8501 & SSPC Systems
  • Inspector shall have direct knowledge of all aspects of heat treatment with the types of equipment such as electrical resistance heating elements, induction coils, or gas fired heaters
  • Shall demonstrate a working a thorough knowledge and proven ability of all phases and types of critical coating applications, methods, and recognized industry standards
  • Experience with installation of equipment such as, Pumps, Motors, Skids, Valves, Vessels, Compressors, Fired Heaters, Auxiliary Equipment, Packaged Equipment in plant construction, etc
  • Excellent computer skills with experience in Microsoft Office

Company Overview

Wood is a global leader in engineering and consultancy across energy and the built environment, helping to unlock solutions to some of the world's most critical challenges. We provide consulting, projects and operations solutions in more than 60 countries, employing around 40,000 people.

Diversity Statement

We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.

Wood is a global leader in consulting and engineering across energy and the built environment, helping to unlock solutions to some of the world’s most critical challenges. We provide consulting, projects and operations solutions in more than 60 countries, employing around 40,000 people. At Wood our common purpose is to ‘unlock solutions to the world’s most critical challenges.’ Through the delivery of our Consulting, Project and Operations solutions across energy and the built environment we deliver exceptional returns for our clients, our people, our investors and the communities where we live and work. Visit us at and follow us on Facebook and LinkedIn.