Skills: MWD / LWD, Mechanical Technician
Education: Associates/2 yr Degree/Diploma
Employment Type: Full Time Salaried Employee
Location: Broussard, Louisiana, United States
In order to apply for this position, applicants MUST meet the following criteria. If your resume does not match these criteria, you will not be able to apply for this position.
Under general supervision, performs maintenance and inspection on Measurements while drilling and/or Logging While Drilling down-hole tool electronics and other equipment used in the application for down-hole tools including Directional and/or LWD sensors.
- Assembles and disassembles Measure while drilling and/or Logging While Drilling down- hole tools.
- Identifies tool usage sheet and determines maintenance schedule required, Verify whether preventative maintenance is scheduled on the inserts.
- Areas of specialization within Product Service Line (PSL) may include: electronics aptitude, computer skills, surface equipment, and down-hole tools. Job tasks, correctly performed, have minimal impact upon the viability of the organization.
- Error is readily ascertainable by the supervisor and can be corrected.
Requirements: Associates degree or similar education and 6-12 months experience as a Downhole Mechanical Tech I or equivalent tool technician training or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- Basic computer skills are required.
- Military training may be substitued for this minimum requirement.
- Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
- The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required.
- Basic reading comprehension and writing skills are required.
- Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
- Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
- Promotes and takes an active part in the quality improvement proces.
- Ability to work 24 hour call and respond to call outs within one hour.
- Ability to accept calls for off loading equipment and complete the appropriate Quality Control documentation including shipping documents.
- Knowledge of HMS and Tool Operations manual and Global Maintenance Standards for specific sub PSL. Ability to locate, read and understand tool drawing from PSL-specific Tool Manual.
- Adheres to HSE guidelines, Safety training compliance including Job risk assessments.
- Must have a valid driver license.
- Must be able to pass drug and alcohol testing, as well as all other relevant post offer requirements for job.
- Work Schedule: M_F, 7 - 3:30, with some overtime as needed. On call every other week
Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Electrical/Mechanical Technician II, Electrical/Mechanical Technician III or Electrical/Mechanical Technician IV - LWD
Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.
4607 Hwy 90 E, Broussard, Louisiana, 70518, United States
Requisition Number: 79455
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time
Additional Locations for this position:
Compensation is competitive and commensurate with experience.
Founded in 1919, Halliburton is one of the world's largest providers of products and services to the energy industry. With over 50,000 employees, representing 140 nationalities, and operations in approximately 70 countries, the company serves the upstream oil and gas industry throughout the lifecycle of the reservoir – from locating hydrocarbons and managing geological data, to drilling and formation evaluation, well construction, completion and production optimization. Halliburton's fascinating and proud history reveals a continuous focus on innovation and expansion that began with the company's founder, Erle P. Halliburton. After borrowing a wagon, a team of mules and a pump, he built a wooden mixing box and started an oil well cementing business in Duncan, Oklahoma.
In the 1930s, Halliburton established its first research laboratories where the company tested cement mixes, began offering acidizing services to break down the resistance of limestone formations and increase the production of oil and gas, and performed its first offshore cementing job using a barge-mounted cementing unit at a rig in the Creole Field in the Gulf of Mexico. This was the beginning of what was to become the world's most extensive offshore service.
Halliburton took the initial steps toward becoming a worldwide company in 1926. We sold five cementing units to an English company in Burma, the start of our Eastern Hemisphere operations, and Erle P. Halliburton sent his brothers to open our business in Alberta, Canada. We opened in Venezuela in 1940. By 1946, the company – using its innovative technology – had expanded into Colombia, Ecuador, Peru and the Middle East and began performing services for the Arabian-American Oil Company, the forerunner of Saudi Aramco.
In 1951, Halliburton made its first appearance in Europe as Halliburton Italiana SpA., a wholly owned subsidiary in Italy. In the next seven years, Halliburton launched Halliburton Company Germany GmbH, set up operations in Argentina and established a subsidiary in England.
In 1984, Halliburton provided all of the well completion equipment for the first multiwell platform offshore China. Two years later, Halliburton became the first American company to perform an oilfield service job on the China mainland
The final decade of the 20th century brought more changes and growth to Halliburton. The company opened a branch office in Moscow in 1991.
The company realigned its work into Eastern and Western Hemisphere operations in 2006, and in 2007, divided its service offerings into two divisions: Completion and Production, and Drilling and Evaluation.
Today, Halliburton offers the world's broadest array of products, services and integrated solutions for oil and gas exploration, development and production.
To learn more about career opportunities, please visit www.gohalliburton.com.
Halliburton is an equal opportunity employer.