Company: Halliburton
Skills: Maintenance Technician
Experience: 2 + Years
Education: High School/Secondary
Employment Type: Full Time Salaried Employee
Location: Carrollton, Texas, United States
No location/work authorization restrictions found.


We are looking for the right people - people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world's largest providers of products and services to the global energy industry.

Job Summary
Under general supervision, repairs and performs maintenance on conventional tools, down-hole tools and other equipment used in the application for down-hole operations. Areas of specialization within Product Service Line (PSL) specific shop operations may include: mechanical aptitude, pressure testing, surface equipment, and down-hole tools.

Job Duties
  • Performs maintenance, inspects surface equipment, and performs repairs.
  • Assembles and disassembles down-hole tools.
  • Skills are typically acquired through a high school diploma or similar education and 2-3 years of experience as a Tool Technician II or equivalent tool technician experience.
  • Ability and authorization to accept and reject pressure tests on assemblies.
  • Basic computer skills are preferred.


Job Requirements
  • Licensure to drive commercial equipment may be required.
  • Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
  • The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required.
  • Basic reading comprehension and writing skills are required.
  • Basic computer skills are preferred.
  • Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
  • Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
  • Promotes and takes an active part in the quality improvement process.


Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher-level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience and skills, a variety of job opportunities might be available including Tool Tech III, Tool Tech IV up to a Shop Leader.

Halliburton is an Equal Opportunity Employer.

Location
2601 Belt Line Rd , Carrollton , Texas , 75006 , United States

Job Details
Requisition Number: 75896
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Completion Tools
Full Time / Part Time: Full Time
Additional Locations for this position:

Founded in 1919, Halliburton is one of the world's largest providers of products and services to the energy industry. With over 50,000 employees, representing 140 nationalities, and operations in approximately 70 countries, the company serves the upstream oil and gas industry throughout the lifecycle of the reservoir – from locating hydrocarbons and managing geological data, to drilling and formation evaluation, well construction, completion and production optimization.  Halliburton's fascinating and proud history reveals a continuous focus on innovation and expansion that began with the company's founder, Erle P. Halliburton. After borrowing a wagon, a team of mules and a pump, he built a wooden mixing box and started an oil well cementing business in Duncan, Oklahoma.

 

In the 1930s, Halliburton established its first research laboratories where the company tested cement mixes, began offering acidizing services to break down the resistance of limestone formations and increase the production of oil and gas, and performed its first offshore cementing job using a barge-mounted cementing unit at a rig in the Creole Field in the Gulf of Mexico. This was the beginning of what was to become the world's most extensive offshore service.

 

Halliburton took the initial steps toward becoming a worldwide company in 1926. We sold five cementing units to an English company in Burma, the start of our Eastern Hemisphere operations, and Erle P. Halliburton sent his brothers to open our business in Alberta, Canada. We opened in Venezuela in 1940. By 1946, the company – using its innovative technology – had expanded into Colombia, Ecuador, Peru and the Middle East and began performing services for the Arabian-American Oil Company, the forerunner of Saudi Aramco.

 

In 1951, Halliburton made its first appearance in Europe as Halliburton Italiana SpA., a wholly owned subsidiary in Italy. In the next seven years, Halliburton launched Halliburton Company Germany GmbH, set up operations in Argentina and established a subsidiary in England.

 

In 1984, Halliburton provided all of the well completion equipment for the first multiwell platform offshore China. Two years later, Halliburton became the first American company to perform an oilfield service job on the China mainland

 

The final decade of the 20th century brought more changes and growth to Halliburton. The company opened a branch office in Moscow in 1991.

 

The company realigned its work into Eastern and Western Hemisphere operations in 2006, and in 2007, divided its service offerings into two divisions: Completion and Production, and Drilling and Evaluation.

 

Today, Halliburton offers the world's broadest array of products, services and integrated solutions for oil and gas exploration, development and production.

 

To learn more about career opportunities, please visit www.gohalliburton.com.

 

Halliburton is an equal opportunity employer.

 

                                       

 

 

Halliburton placed 2nd in the 2018 Rigzone Ideal Employer Rankings - find out more