Skills: Well Servicing & Testing
Education: High School/Secondary
Employment Type: Full Time Salaried Employee
Location: Ciudad de México, Ciudad de México, Mexico
In order to apply for this position, applicants MUST meet the following criteria. If your resume does not match these criteria, you will not be able to apply for this position.
Under strict supervision, assists during the rigging up and down of Surfce Well Testing (SWT) service line equipment on work locations for the purpose maintaining control and the processing of wellbore fluids during well testing operations and providing the customer with essential reservoir information by the use (but not limited to): Surface Well Test and Surface Pressure Control equipment packages. May assist other Testing & Subsea product service lines (PSL) on location as needed. Learns basic Testing & Subsea (SWT) operations to include (but not limited to): completion of Job Safety Analysis (JSA) paperwork, performing and completing preventative maintenance procedures, maintaining and operating Testing & Subsea (SWT) equipment, use of Personal Protective Equipment (PPE), Journey Management, Job Safety Analysis (JSA's), Permit to Work System (PTW), Hazard Observation Check (HOC Cards), Toolbox Meetings, Safety Huddles, Local Area requirements, and completing Testing & Subsea training requirement programs. Works in the Testing & Subsea workshop assisting in the repair and maintenance of (SWT) equipment. Assists in assembly and preparation of equipment for installation and service. Assists in the running of a job and in the clean up, repair, and preparation for the next job. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Job tasks, correctly performed, have minimal impact upon the viability of the organization. Skills typically acquired through completion of high school or similar education and 6 months of Surface Well Testing experience. Must be capable of understanding/basic navigation of HMS, iLearn and Competency sites on HALWORLD. Must have successfully passed company tests or met task guideline requirements. Must have passed Oilfield primer training and Essential Math. The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required. Basic reading comprehension and writing skills are required. Basic computer skills are preferred. Licensure to drive commercial vehicles may be required. Must have met the minimum competency requirements for Operator Assistant I - Surface Well Testing.
Halliburton is an Equal Opportunity Employer.
Carretera a Reforma Km. 10.4, Reforma, Chiapas, 29500, Mexico
Requisition Number: 71841
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Testing and Subsea
Full Time / Part Time: Part Time
Additional Locations for this position:
Compensation is competitive and commensurate with experience.
Founded in 1919, Halliburton is one of the world's largest providers of products and services to the energy industry. With over 50,000 employees, representing 140 nationalities, and operations in approximately 70 countries, the company serves the upstream oil and gas industry throughout the lifecycle of the reservoir – from locating hydrocarbons and managing geological data, to drilling and formation evaluation, well construction, completion and production optimization. Halliburton's fascinating and proud history reveals a continuous focus on innovation and expansion that began with the company's founder, Erle P. Halliburton. After borrowing a wagon, a team of mules and a pump, he built a wooden mixing box and started an oil well cementing business in Duncan, Oklahoma.
In the 1930s, Halliburton established its first research laboratories where the company tested cement mixes, began offering acidizing services to break down the resistance of limestone formations and increase the production of oil and gas, and performed its first offshore cementing job using a barge-mounted cementing unit at a rig in the Creole Field in the Gulf of Mexico. This was the beginning of what was to become the world's most extensive offshore service.
Halliburton took the initial steps toward becoming a worldwide company in 1926. We sold five cementing units to an English company in Burma, the start of our Eastern Hemisphere operations, and Erle P. Halliburton sent his brothers to open our business in Alberta, Canada. We opened in Venezuela in 1940. By 1946, the company – using its innovative technology – had expanded into Colombia, Ecuador, Peru and the Middle East and began performing services for the Arabian-American Oil Company, the forerunner of Saudi Aramco.
In 1951, Halliburton made its first appearance in Europe as Halliburton Italiana SpA., a wholly owned subsidiary in Italy. In the next seven years, Halliburton launched Halliburton Company Germany GmbH, set up operations in Argentina and established a subsidiary in England.
In 1984, Halliburton provided all of the well completion equipment for the first multiwell platform offshore China. Two years later, Halliburton became the first American company to perform an oilfield service job on the China mainland
The final decade of the 20th century brought more changes and growth to Halliburton. The company opened a branch office in Moscow in 1991.
The company realigned its work into Eastern and Western Hemisphere operations in 2006, and in 2007, divided its service offerings into two divisions: Completion and Production, and Drilling and Evaluation.
Today, Halliburton offers the world's broadest array of products, services and integrated solutions for oil and gas exploration, development and production.
To learn more about career opportunities, please visit www.gohalliburton.com.
Halliburton is an equal opportunity employer.
Halliburton placed 2nd in the 2018 Rigzone Ideal Employer Rankings - find out more.