Experience: 3 + Years
Education: High School/Secondary
Employment Type: Full Time Salaried Employee
Location: Huntsville, Texas, United States
In order to apply for this position, applicants MUST meet the following criteria. If your resume does not match these criteria, you will not be able to apply for this position.
Weatherford is one of the largest multinational oilfield service companies providing innovative solutions, technology and services to the oil and gas industry. The Company operates in over 90 countries and has a network of approximately 1,000 locations, including manufacturing, service, research and development, and training facilities and employs approximately 29,500 people. For more information, visit www.weatherford.com and connect with Weatherford on LinkedIn , Twitter , YouTube and Facebook .
Weatherford delivers innovative technologies and services designed to meet the world's current and future energy needs in a safe, ethical, and sustainable manner. Grounded by our core values and inspired by our world-class people, we are committed to being a trusted business partner to those we serve.
Under the general supervision of a Leadman, Operate CNC lathe or mill used to machine Weatherford equipment and components per drawings and prints issued by engineering.
DUTIES & RESPONSIBILITIES:
Know and understand Weatherford's Enterprise Excellence Process and the Quality Policy and comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Workplace Instructions.
Perform basic operational function of CNC machines.
Maintain acceptable reject and scrap rates, production rates.
Identify problems and be able to correct most of them with assistance.
Mount, align, and secure tooling, attachments and work piece on machine.
Install cutting tools in machine.
Load control media, such as tape, card or disk, in machine controller or enter commands to retrieve pre-programmed instruction from database.
Calculate and set machine controls to position tools in relationship to work piece and to regulate factors, such as cutting depth, speed, feed, and coolant flow.
Start machine and monitor displays and machine operations to detect malfunctions.
Stop machine to change cutting tools and setup according to required machining sequence or to measure parts for conformance to blueprint specifications, using precision measuring instruments, under supervision.
Maintain proper maintenance of machine, equipment and facilities and keep in proper condition.
Must provide all needed measuring tools and box to keep them in. Basic tools required: 12" hook scale, 12" calipers, 0-6" ID/OD Mics. Equipment must be ordered within 90 days of start date.
Keep the machine area clean and orderly at all times.
Responsible for recording all labor hours with time system accurately.
Handle machine finished items in a careful manner to prevent damage, and function in a safe and reliable manner to prevent personal injury and/or property damage.
Responsible for cleaning machine and area prior to leaving each day.
Capable of learning and moving to the next higher level.
Must understand and comply with all safety rules and company policies of Weatherford.
Must understand and comply with all applicable licensee requirements.
Work assignments carried out to the highest quality level.
Perform various other duties and activities as assigned by supervisor within the physical constraints of the job.
Ability to set-up and run any CNC lathe with some assistance and troubleshoot same programs for potential errors.
Scrap rate is consistently below 4% of output. Meets or beats production standards 95% of the time.
Ability to make program edits with some assistance.
Ability to use geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
Ability to read a measuring tape, micrometer and callipers
Ability to work in a team oriented environment.
3-5 years of experience required.
The physical ability to immediately respond to emergency situations.
Must wear required PPE at all times where mandatory.
Able to completely inspect machined parts.
Ability to read and interpret engineering drawings, specifications and instructions.
Advanced knowledge of machines used, and processes.
POSITION SPECIFIC DETAILS
Weatherford offers competitive compensation and benefits upon hire; including paid vacation to start, matching 401K program, comprehensive benefits program, and employee stock purchase program (ESPP) and opportunities for on-going training and career development. VEVRAA Federal Contractor - Priority Referral Requested
Weatherford is an Equal Opportunity Employer Females/ Minorities/ Veterans/Disabled and gives consideration for employment to qualified applicants without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.
Weatherford is one of the largest multinational oilfield service companies providing innovative solutions, technology and services to the oil and gas industry. We may be a large company, but we empower our team to create fresh ideas that challenge convention and break the status quo. Our employees are the key to driving our growth and success. Everywhere we operate, they are inspired to develop new and efficient ways of raising the bar to meet the needs of an evolving industry and solve our clients’ toughest challenges.
At Weatherford, you will work in an exciting, high-energy environment where we are making groundbreaking, award-winning advancements in oilfield technology. The opportunity to explore your potential is limitless.
Visit www.weatherford.com/careers to learn more.
Weatherford is ranked in the Global Top 10 in Rigzone's Ideal Employer Rankings - find out more here.