Oil-Sands Companies Throw New Tech at Old Foe

Oil-Sands Companies Throw New Tech at Old Foe
Canada's oil-sands companies have been ramping up efforts to get their peanut butter-like bitumen to flow through pipelines more easily and cheaply.

(Bloomberg) -- In their quest to make one of the most expensive methods of producing crude more profitable, Canada’s oil-sands companies have been ramping up efforts to get their peanut butter-like bitumen to flow through pipelines more easily and cheaply.

MEG Energy Corp. threw a spotlight on those efforts on Tuesday, when it said that it’s working with a financial adviser on strategic alternatives for its HI-Q partial upgrading technology. The company is betting that there may be a lucrative market for the method, which cuts out the need for costly diluting agents that take up precious pipeline space.

Producers in the prolific oil sands -- the world’s third-largest petroleum reserves -- typically use natural gas condensate to turn their sticky heavy crude into something pipelines can carry. While much of it is produced from Alberta and British Columbia’s Montney shale formation, some diluent is imported from the U.S. as well.

That condensate tends to trade on par with the price of light, sweet West Texas Intermediate or even at a premium to that grade, which itself trades at a premium to Western Canadian Select heavy crude.

And to flow through a pipeline, bitumen needs to be about 30 percent condensate. Technology to reduce those requirements would go a long way toward making the historically costly oil-sands more competitive, and it would free up the pipeline space that has become so scarce that the Alberta government needed to mandate province-wide oil-production cuts.

“The removal of that diluent obviously would not only impact the bottom lines of producers, but also could improve overall market sentiment in Western Canada, given the pipeline-access issues,” said Dinara Millington, vice president of research at the Canadian Energy Research Institute.

MEG says its HI-Q technology allows bitumen to be shipped through pipelines without blending with lighter hydrocarbons. The technology employs a process that entails removing and recycling some diluent used in its initial processing, separating out the lighter and heavier portions of the bitumen, then removing solid materials known as asphaltenes.

But it’s not the only company working a diluent-cutting technology. Cenovus Energy Inc. said in October that it was working on a 1,000-barrel-a-day pilot plant using a method that would reduce its diluent needs by half. Husky Energy Inc. is working on a 500-barrel-a-day pilot plant for its diluent-reduction technology at its Sunrise oil-sands project near Fort McMurray. The company has said the process has the potential to cut diluent requirements by half.

“The biggest hurdle is moving that pilot phase into the commercial phase and demonstrating the scale,” Kevin Birn, IHS Markit’s director of North American crude oil markets, said in an interview. “That first mover would obviously have an advantage to then step out from that plant and bring in other producers on joint-venture or operational basis.”

Alberta’s government also is getting in on efforts to upgrade the province’s crude. Premier Rachel Notley on Tuesday announced the province is extending a C$440 million loan guarantee to Value Creation Inc. to encourage its construction of a C$2 billion partial upgrader, which would turn 77,500 barrels of diluted bitumen a day into higher-value products like medium synthetic crude and ultra-low-sulfur diesel.

The effects of reducing or eliminating diluent needs could eventually ripple beyond the oil sands. Already, the growth of condensate production in Western Canada has trimmed the need for U.S. imports, and diluent-reducing technologies could accelerate that trend. However, that could be a long ways off, as the technology still needs to develop, and large, commercial-scale facilities would take time to build, Birn said.

“If you look at partial-processing technology, certainly it could have an effect on diluent demand in smaller volumes earlier,” Birn said, “but to have a really large effect, I think you’re looking some period out into the future.”

To contact the reporter on this story: Kevin Orland in Calgary at korland@bloomberg.net. To contact the editors responsible for this story: Simon Casey at scasey4@bloomberg.net Carlos Caminada, Joe Carroll.


Generated by readers, the comments included herein do not reflect the views and opinions of Rigzone. All comments are subject to editorial review. Off-topic, inappropriate or insulting comments will be removed.

Lyle Summerfield  |  January 25, 2019
Why not run copper tracer steam lines along the pipe, then insulate the whole pipeline. This is what the Dow Companies do to their chemical lines. Now getting a generating units on line ever so far in the pipeline, well, that's up to your engineers to figure out. Could create some jobs along the way!