Production Resumed at Gullfaks C Platform

The Gullfaks C platform in the North Sea has started producing again.

Production had been shut down on Gullfaks C since a well incident occurred on May 19. Activities on board have been concentrated on plugging the C-06 well systematically from the bottom and up.

The incident entailed change in pressure and loss of drill fluid, which resulted in the loss of one barrier in the well. There was also uncertainty about the integrity of the remaining barrier. Statoil decided therefore to shut down production.

"We've now installed three cement plugs and one mechanical plug in the well," said Rune Gaasø, acting head of Gullfaks drilling and well operations.

"This isolates the well from the reservoir and a high-pressure zone in the Shetland/Lista formation. The barriers are now intact, and we have given the green light for normalization."

Thorough risk assessment

A hole has been identified in a casing at a depth of 1,400 meters. The well is stable and has no leaks.

"We're now going to work to seal the hole before we temporarily abandon the well and facilitate re-use of the well slot," said Gaasø.

In the work to put the barriers in place in the well Statoil has used methods with the lowest possible risk of escalating the situation, with good support from various specialist entities in the company, as well as from contractors and external partners.

Comprehensive start-up plan

The Gullfaks organization has prepared a detailed start-up plan which is more extensive than is normal after a planned maintenance turnaround, for instance.

Acting operations vice president Helge Kjell Rørnes is happy that the barriers are now intact and that the platform is approaching normalization.

"The situation has been demanding and has involved many people," he said.

"Our work has taken time but spending time making completely sure that we're taking the correct measures was the right thing to do."

Statoil has appointed an investigation team to examine the incident of May 19. On the basis of the team's report the company will be able to draw relevant lessons about making well constructions more robust.