Aker Kvaerner to Build Two Semisubs for Aker Drilling

Aker Drilling has awarded Aker Kvaerner a turn-key contract for the delivery of two sixth-generation deepwater drilling semisubmersibles with an option for another two rigs by 2010. The two drilling rigs are scheduled for delivery in February and October 2008. The contract value is approximately NOK 7.6 billion (about US $1.12 billion).

The contract comprises the complete delivery of the two biggest and most advanced drilling rigs in the world. The engineering will be carried out at the Aker Kvaerner's engineering office at Lysaker and Aker Kvaerner MH's office in Kristiansand, Norway. The assembly and commissioning will be done at Aker Kvaerner's yard at Stord, Norway. Hull construction will be handled by Aker Kvaerner's yard at Verdal with a combination of subcontracting and fabrication at own yard. The rigs will be equipped with Aker Kvaerner's state-of-the-art Dual RamRig® drilling equipment. Aker Yards, Brevik, will perform the hull design. Several other sub-contracts will be placed over the next few weeks.

Executive vice president in Aker Kvaerner, Simen Lieungh, says, "Aker Kvaerner holds both yard and engineering competence and capacity, in addition we own the rig concept. These factors should prove extremely valuable for the successful delivery of the two rigs".

Aker Kvaerner has delivered 37 semi-submersibles of the H-3 and H-4 design which is the world's most proven rig design and have for 30 years demonstrated excellent performance on the seven seas. The new H-6e design is intended both for worldwide deepwater operations and harsh environment. In addition to the drilling rigs, Aker Kvaerner has delivered some of the most advanced and sophisticated production semisubmersibles in the world, the Kristin platform being the most recent example.

"We intend to utilize the recent Kristin experience for the drilling rig project", says Simen Lieungh. Kristin is a semisubmersible production platform for Statoil which was completed in March/April 2005 at the Stord yard. "Kristin was delivered fully completed inshore and on time. We plan to repeat this accomplishment on the H-6e drilling rigs", concludes Lieungh.

Contract partner to Aker Drilling is Aker Kvaerner Stord. The contract is dependent on the successful financing of Aker Drilling and board approval in Aker ASA and Aker Kvaerner.

The new H-6e is an enhancement of the existing Aker H-4.2 column floater with transverse truss arrangement between eight columns. The design has its roots in the well known Aker H-3. A total of 37 units of the H-3/H-4 design are delivered and have for 30 years demonstrated excellent performance on the seven seas. The H-6e is intended both for worldwide deepwater operations and harsh environment. It is configured for dynamic positioning to 3000-meter water depths.

Main features:
Large payload and storage capacity
Excellent and proven motion characteristics
High drilling and completion efficiency
Double RamRig®
Vertical riser and casing racking
Independent handling of BOP and X-mas trees
Maximum parallel activities
Large working space for safe and efficient operations
Protected working and storage areas
Large bed capacity
Low emissions to the environment
Real time remote operation and diagnostic capabilities
Prepared for installation of 8 point mooring system
Fully winterized

For More Information on the Offshore Rig Fleet:
RigLogix can provide the information that you need about the offshore rig fleet, whether you need utilization and industry trends or detailed reports on future rig contracts. Subscribing to RigLogix will allow you to access dozens of prebuilt reports and build your own custom reports using hundreds of available data columns. For more information about a RigLogix subscription, visit www.riglogix.com.