Conoco To Start Dismantling Historical Norwegian Oil Platform



Reuters

OSLO, Aug 17 (Reuters) - ConocoPhillips has won permission to prepare for the removal of the first permanent oil platform built off Norway more than 40 years ago, the country's industry regulator said on Thursday.

The U.S. company applied in July to remove Ekofisk 2/4 A, which started producing oil from the North Sea in 1974 and shut permanently in 2013.

Production at the Ekofisk field began in 1971 from the Gulftide jack-up rig, a temporary installation standing on removable legs. Gulftide was replaced with production platforms permanently fixed to the seabed in 1974.

Discovered in 1969, Ekofisk was the first oilfield to begin production off Norway, kickstarting a period of unprecedented wealth for the nation of 5 million inhabitants.

While the field's oldest installations are being removed, new equipment was put in place and production is ongoing, with the field expected to continue pumping oil towards 2050.

The Norwegian Petroleum Safety Authority said it had granted consent for ConocoPhillips to prepare for the removal of 2/4 A and three other installations.

With the exception of some smaller parts, the actual removal will depend on a later permit, it added.

ConocoPhillips plans to start preparations in the fourth quarter of this year.

The removal plans also include two accommodation platforms, Ekofisk 2/4 H and Ekofisk 2/4 Q, and a riser platform called Ekofisk 2/4 FTP.

Dutch company Heerema was awarded the removal contract, and all four platforms will eventually be taken to AF Decom yard at Vats on Norway's western coast for dismantling and steel recycling, a spokesman for ConocoPhillips said.

Operator ConocoPhillips has a 35 percent stake in Ekofisk, France's Total has almost 40 percent, Italy's Eni has 12.4 percent, Norway's Statoil has 8 percent and Norwegian state-owned Petoro has 5 percent.

(Reporting by Nerijus Adomaitis; Editing by Dale Hudson)



WHAT DO YOU THINK?


Generated by readers, the comments included herein do not reflect the views and opinions of Rigzone. All comments are subject to editorial review. Off-topic, inappropriate or insulting comments will be removed.

Ron Kennedy  |  August 17, 2017
I have over 36yrs oilfield industry all with major service companies. There was six years where I was contracted out to Apache to work in their de-com program in the GOM. I personnel designed and plugged successfully over 350 wells with no bubliers or failures. I would love to rotate on this Conoco Phillips project to plug these wells. That is first event of order before any platform removal can take place. All casings must be removed at least 15 BML. Respectfully, Ron Kennedy