Transerv Completes Fracture Stimulation Work at Warro-5 Well in WA
Transerv Energy reported Monday that fracture stimulation work has been successfully concluded at the Warro-5 well in Western Australia’s Mid-West.
The Warro-5 and Warro-6 wells are now being completed in preparation for long-term gas testing.
Warro-5 stimulation operations were completed on Jan. 7 and all the equipment is now being demobilized from site. The final, second stage at Warro-5 resulted in the 305,000 pounds (138,400 kilograms) of proppant being placed in the gas reservoir. Combined with the deeper Stage 1, Warro-5 has injected 385,000 pounds (175,000 kilograms) of proppant over an interval 14,206 - 14,469 feet (4,330 - 4,410 meters) rotary table (RT). Clean-up flows at Warro-5, conducted over the weekend yielded a sustained gas flow with a continuous flare. Like Warro-6, the gas rate could not be measured. This will be done once metering equipment, required for the extended testing program, is installed.
At Warro-6, the Enerdrill workover Rig 1 is now preparing to run 2.375 inch production tubing after which a jet pump will be placed in the well to assist with the recovery of any liquids. An identical completion will be installed immediately afterwards at Warro-5. Gas flow testing is expected to commence at both Warro-5 and 6 wells during the second half of January and is planned to continue through 1Q and 2Q 2016.
WHAT DO YOU THINK?
Generated by readers, the comments included herein do not reflect the views and opinions of Rigzone. All comments are subject to editorial review. Off-topic, inappropriate or insulting comments will be removed.
- Transerv Successfully Completes Retesting Ops at Warro-4 Well in WA (Jul 12)
- Transerv, Norwest Join Hands to Drill Xanadu Prospect in Perth Basin Off WA (Jul 11)
- Transerv Continues Retesting Ops at Warro-4 Well in WA's Warro Gas Project (Jul 05)