Samson O&G Briefs on Rodney Well Completion
Samson O&G advised that the Rodney #1-14H has been turned to production following the successful fracture stimulation and completion. The work over rig was released on June 25th after all of the fracture isolation plugs were drilled out without incident. The maximum 24 hour measured oil rate during the drill-out operation was 1,439 BOPD.
The Rodney #1-14H well is located in Township 154N, Range 99W, Section 14 in Williams County, North Dakota.
HAWK SPRINGS PROJECT, WYOMING - DEFENDER US 33 #2-29H (37.5% WORKING INTEREST)
Operations commenced on the Defender well with the initiation of the construction of the well pad in preparation for the arrival of the Evergreen 42 drilling rig which is expected to arrive on location on July 16th with an anticipated spud of July 19th. The Defender well will be the first appraisal of the Niobrara B zone and will be fracture stimulated following the completion of a 4,500 foot horizontal.
The Defender US 33 #2-29H well is located in Township 25N, Range 63W, Section 29 in Goshen County, Wyoming.
- Samson O&G Updates Montana, Wyoming Ops (Feb 28)
- Flow Back Ops Continue at Samson's Hawk Springs Proj. (Nov 28)
- KKR to Buy Samson for $7.2B (Nov 23)