Capping Device under Construction to Strengthen UK Oil Spill Response

Cameron's Caping Device

Cameron has started manufacturing a well capping device which will become a key element of the UK offshore oil and gas industry's oil spill response contingency plans. Completion of the device is due this summer, Oil & Gas UK reports.

The cap's construction follows the recommendation of the Oil Spill Prevention and Response Advisory Group (OSPRAG), the body set up by the industry, its regulators and trade unions immediately following the blow-out in the Macondo well last April. The design development was overseen by OSPRAG's Technical Review Group, working with BP, which agreed to project manage the detailed design, procurement and construction phases, and engineering services firm J P Kenny. The device has been commissioned by the industry's specialist organization, Oil Spill Response Ltd. Construction is underway in Leeds.

The capping device has an overall pressure rating of 15,000 psi and is capable of capping a well flowing up to 75,000 b/d in up to 5,500 feet (1,670 m) of water. The device can be deployed in sea states of up to 16 feet (5 m), depending on the vessel used. Capping should be achieved within 20 – 30 days of the incident, depending on weather and well site conditions.

The cap is modular in design, with specifications which allow it to be deployed in the widest range of possible oil spill scenarios that could typically be encountered in the UK continental shelf, including west of Shetland. The device, deployable from a multi service vessel, can be attached to various parts of the subsea equipment in order to seal off or 'cap' the flow of oil.

The new cap complements other work being carried out by the UK industry in oil spill prevention. It demonstrates the industry's determination to learn from experience and continuously improve the safety of operations so that risks to people and the environment are reduced.

Oil & Gas UK's chief executive, Malcolm Webb, said, "Having such a contingency device in the UK is important as it allows a quick response in the unlikely event of a well blowout. Our overriding priority remains, however, to prevent such incidents from occurring in the first place. There has not been a single blow-out in this country in over 20 years of UK offshore operations and we must ensure that it remains this way. The UK's regulatory regime, and the safety culture it promotes within our industry, is regarded as world class."

Archie Smith, chief executive at Oil Spill Response, said, "Oil Spill Response Ltd is pleased to support this initiative to improve environmental protection in the UK. We have been at the forefront of oil spill response services for 25 years and will bring a lot of experience to the management and readiness of this device. We hope it is never needed but will remain ready at all times should an incident occur."

Oil & Gas UK is the leading representative organization for the UK offshore oil and gas industry. Its members, who number over 100, are companies licensed by the Government to explore for and produce oil and gas in UK waters and those who form any part of the industry's supply chain.

OSPRAG was established in the UK on May 2010 and includes senior representatives from all sides of the industry, industry regulators, the trade unions, the Maritime & Coastguard Agency and the Secretary of State's Representative for Maritime Salvage and Intervention, with a representative from the EU Energy Commission attending as an observer. More information is available.

Oil Spill Response is the oil industry's global oil spill response cooperative with operational bases in the UK, Singapore and Bahrain. It is a not for profit organization that is wholly owned by 39 of the world's most environmentally conscious companies and has in excess of 80 Associate Members.


Generated by readers, the comments included herein do not reflect the views and opinions of Rigzone. All comments are subject to editorial review. Off-topic, inappropriate or insulting comments will be removed.