Dynamic Position Jobs

Responsible for the safe navigation of the vessel and set up assignment of the DP position reference systems when on duty. Shall not leave the bridge unless relieved by another qualified person Operate ...

The uninterrupted manning of the dynamic positioning console. That neither dynamic position console nor bridge is left unattended at any time. All relevant governing documents are adhered to by direct ...

Wood is currently recruiting for a CFD (Computational Fluid Dynamics) Engineer with extensive experience in the energy industry. The successful candidate will be required to demonstrate CFD knowledge ...

You will be required to perform the following: Provide complex flow, thermal analysis for the process unit equipment (reactors, compressors, pumps, phase-separators) using commercial CFD tools to troubleshoot ...

? STCW required certificates, National CoC Reg. III/2 and endorsement ? Dynamic Position Training as per Company Procedure ? MOU stability course (where applicable) Experience ? Minimum three(3) Years ...

as stated on the Station Bill, DP Emergency Response Plan and vessel specific Emergency Response Manual Participate fully in the annual performance appraisal process Assist in training of crewmembers ...

Ensure conformance to Company policies and local and international laws relating to the operation of the vessel and strict compliance with current pollution regulations. Perform daily inspections ...

Ensure daily completion of inspections and maintenance on electrical/electronic equipment Enforce the permit to work and isolation system within the electrical/electronic department Ensure the proper ...

Carry out daily inspections and maintenance on electronic equipment Ensure that the permit to work system is in place and followed Ensure that the Technical Support Centre (TSC) is advise of electrical ...

Carry out daily inspections and maintenance on electronic equipment are carried out. Comply with the permit to work system is in place and followed. Carry out periodic maintenance according to the Preventive ...

Ably Resources are urgently looking for multiple experienced 2nd Mate DPO's to work for a major Oil and Gas Industry contractor WORLDWIDE Position- 2ND Mate DPO Location- Worldwide Rotation- 42/42 ...

My Client, an Oil and Gas Service Company based in the UK, is looking to fill a number of drilling positions Ad-hoc based in Kuwait. All candidates must be located in the GCC and have the right to work ...

Assistant Accountant - East Leake, Leicester This position will be responsible for the day to day understanding of the plant's financial performance. The position will also be involved in resolving manufacturing ...

Wood is searching for engineers interested in the design and analysis of reciprocating compressor packages. The Compressor Package Engineer will work with a team of engineers and designers to optimize ...

are to supervise, manage, lead or delegate aspects of the rig up, maintenance and operation of all MPD equipment on the rig site and base when required.The Field Specialist ll is the focal point between ...

: Develop state-of-the-art low voltage electrical wiring design, enclosures design, power electronics design, selection, purchase specifications, controls strategy & automation systems technology. Design ...

Payroll Supervisor A fantastic opportunity has arisen for an energetic and enthusiastic Payroll Supervisor/Manager to join our Payroll team based at our Shared Services Centre in Aberdeen. This role involves ...

assigned to the Project Manager are varied, but will include: Responsible for all aspects of a geotechnical contract including client liaison, planning and scheduling, commercial control, staffing, supervision ...

: Develop state-of-the-art low voltage electrical wiring design, enclosures design, power electronics design, selection, purchase specifications, controls strategy & automation systems technology. Design ...

• Produce structural engineering reports and input to drawings for fabrication and design items as required.• Provide support to projects for design of rigging and lifting equipment.• Provide support ...