Blowout Prevention and Well Control Series
|
PRICE: $4,778.00
|
||||||||
DescriptionA Comprehensive Videotape Training Program for Land and Offshore Operations This comprehensive training program is targeted at all drilling and well site operations personnel. The program can be conveniently used in a variety of training situations. It is presented in ten videotape "chapters" so personnel can learn and review at their own pace. This format is also effective for crew orientation. These videotapes utilize a variety of production techniques. Film, animation, diagrams and demonstrations, linked by an on-camera presenter, have been combined in the videotape program. The result is a highly-effective instructional presentation. Developed and produced by the Canadian Association of Oil Well. |
|||||||||
- Introduction
This segment covers oil and gas reservoirs, traps, pressure gradients, hydrostatic pressure, geologic pressures, circulating pressure, loss of circulations, swabbing, pressure surges, factors that affect swabbing and pressure surges. 21 minutes. - Causes of Kicks and Blowouts
This segment focuses on causes of kicks and blowouts, formation pressure, hydrostatic pressure, shut-in pressure readings, behavior of gas, pressure inversions, abnormally high pressures. 14 minutes. - Equipment
This segment explains function of blowout prevention equipment, circulating system, annular preventers, ram preventers, other rig equipment related to detection or control. 23 minutes. - Kicks While Drilling
This segment discusses causes of kicks and blowouts, kick warning signs while drilling, flow check while drilling, shut-in procedure while drilling, crew drill. 27 minutes. - Kicks While Tripping
This segment focuses on kick warning signs while tripping, flow check while tripping, shut-in procedure while tripping, crew drill. 10 minutes. - Kicks While Out of the Hole
This segment covers kick warning signs while out of the hole, flow check while out of the hole, shut-in procedures while out of the hole, crew drill. 7 minutes. - Fluid Displacement and Trip Records
This segment discusses fluid displacement, equipment to measure fluid volumes, trip record forms, displacement factors, wet and dry pipe, calculation of theoretical displacement volumes. 14 minutes. - Proper Training and Hole Fill Procedure
This segment covers procedure before tripping out, keeping the fluid level from falling below 30 meters from top of hole, minimum intervals when flow checks should be performed. 9 minutes. - Drillers Method of Well Control
This segment focuses on conditions under which the Drillers Method is used, overview of two-step Drillers method, Drillers method using a gas kick example, procedure. 17 minutes. - Low Choke Method
This segment covers conditions under which this variation of the Low Choke Method is used, formation leak-off test, overview of Low Choke Method procedure. 11 minutes.
Browse by Category
Customer Support
| Phone: 1-800-503-0925 or +1-281-345-4040 Email: store@rigzone.com |
| Prefer to order offline? Add items to your basket and create a quote. Learn More. |