Company: Schlumberger Land Rigs
Skills: Floorhand / Roughneck
Experience: 3 + Years
Education: High School/Secondary
Location: Kenai, AK, US
Status: Active


In order to apply for this position, applicants MUST meet the following criteria. If your resume does not match these criteria, you will not be able to apply for this position.

Authorized to work in: US

WORK ON RIG FLOOR
DEMONSTRATES THE ABILITY TO:
•??successfully handle tubulars (drill pipe, casing, tubing, etc.), to make and break tubular connections using slips (while utilizing proper lifting techniques), top drive, rig tongs and related equipment
•??make up and break out stands and rack in derrick, while tripping pipe, using air hoist, rig tongs, chain tongs, pipe spinners, iron roughneck, mouse hole, collar clamp, etc.
•??properly handle and use subs, lift subs, lift caps and other threaded tubular equipment
•??safely tail, stab, rack back and otherwise handle drill string, casing, tubing, etc.
•??properly rig-up and use of rig floor equipment (air hoists, mouse hole, inner and outer rotary bushings, mud bucket, casing equipment, diverter, etc.)
•??properly maintain correct count of pipe in or out of the hole
•??coordinate well with Driller, Crane Operator and other crewmembers
•??adequately apply safety precautions while testing, logging, etc. (all required PPE, etc.)
•??properly line up and bleed down pressure from lines, valves, equipment, etc.

ROUTINE MAINTENANCE ON RIG FLOOR
UNDERSTANDS :
•??routine maintenance and minor repair of pipe spinners, iron roughneck, rig tongs, chain tongs, pipe slips, collar clamp, pipe elevators, etc.
•??need to dope and protect tubular connection box and pin threads with thread protectors and use proper handling techniques
•??routine maintenance procedures, i.e. slip and cut drill line
DEMONSTRATES THE ABILITY TO:
•??apply the proper amount of grease to grease fittings and other lubrication points on the draw works, top drive, traveling block, crown block, compensators, swivel, hook, chicksans, low-torque valves, standpipe valves, drill line anchor, air hoists, rotary locks, Halliburton wire-line unit, etc.
•??inspect and maintain tubular box and pin connections, dies, nuts, bolts, etc. on drilling equipment for wear and/or damage
•??check the torque on derrick bolts/nuts while utilizing proper PPE
•??perform simple maintenance on hand and power tools
•??maintain wire ropes and cables

MAINTAIN AND HANDLE TUBULAR GOODS
DEMONSTRATES THE ABILITY TO:
•??properly use brushes, rabbits, thread protectors and pipe dope, etc.
•??bundle and move tubular goods from one place to another
•??rack tubulars on pipe rack
•??assist in measuring tubulars
•??install stop collars and centralizers on casing
UNDERSTANDS:
•??requirement to inform Driller of changes in mud weights, changes in amount of flow of mud across shakers, etc.

 

WORK IN SHAKER HOUSE
DEMONSTRATES THE ABILITY TO:
•??take mud samples, weigh mud and take viscosity readings
•??maintain log of mud weights, times, etc.
•??adjust flow of mud evenly across shaker screens
•??operate machinery, valves and controls properly
•??properly operate shaker house equipment
•??use approved procedures to maintain, repair and adjust equipment
•??assist Derrickman in mixing and handling of mud and chemicals while adhering to all safety policies, procedures, etc.
UNDERSTANDS :
•??proper selection and use of PPE

ASSIST IN HANDLING AND MIXING MUD/CHEMICALS
DEMONSTRATES:
•??correct knowledge and use of mixing/ barite hoppers
•??understanding of special precautions and utilizing special procedures for mixing hazardous chemicals, i.e. caustic, etc.
•??proper disposal of debris, for example, empty sacks and buckets
•??proper lifting techniques
UNDERSTANDS :
•??importance of informing Driller of any abnormal fluid fill and or returns

MONITOR HOLE FOR ADEQUATE FILL
DEMONSTRATES THE ABILITY TO:
•??line-up trip tank, fill it and circulate mud/fluid over the hole properly
•??properly calculate and verify correct fluid fill and returns when pipe is run in or pulled out of hole
UNDERSTANDS:
•??what is necessary to assist and/or perform with supervision, maintenance and simple repairs on the BOP equipment
DEMONSTRATES :
•??knowledge of well control emergencies and assigned duties, including a general overview of well control procedures
•??adequate understanding of BOP ram configurations
•??understanding of consequences of using blind/shear rams
•??understanding of trip/pit drills, responsibilities
•??understanding of nippling up and nippling down the BOPs, diverter, wing valves, etc. while utilizing the proper PPE

BLOWOUT PREVENTION
DEMONSTRATES THE ABILITY TO:
•??use and install the necessary equipment
•??change the rams
CASING OPERATIONS
DEMONSTRATES:
•??understanding of the correct procedures for handling casing and related equipment

•??understanding of the precautions and correct use of hand slips, tailing rope, elevators, spiders, thread locking compounds, stop collars, centralizers, etc
•??understanding of the precautions and the correct use of the casing stabbing board and related PPE
•??understanding of the precautions related to working around the cement unit, handling cement lines, working with equipment that is under pressure, etc.

RELIEVE THE DERRICKMAN
DEMONSTRATES THE ABILITY TO:
•??use the correct procedures for the approach to and from the monkey board, while utilizing the proper PPE
•??properly function and work from the monkey board (tripping pipe, making connections, racking BHAs, etc.)
•??use the appropriate procedures when working in the derrick, pump room, chemical room, pit room, p-tank room, bulk air compressor room, etc.

Schlumberger

 

A tradition of excellence and innovation

 

We’re the leading provider of oilfield services, focusing on innovative technologies for reservoir characterization, drilling, and production. We’re also a leading employer in our sector—with a reputation for hiring the best and the brightest people and keeping them at the top of their game through rewarding career-long development opportunities.

 

Each day, in 85 countries, we help our customers find and produce oil and gas in ways that demonstrate respect for both people and the environment. Today’s industry challenges call for new ideas, techniques, and solutions. If you want to drive your career and want to grow with a company that’s embraced new ways of thinking since 1927, we may have the career for you.



image descriptionOther Jobs That Might Interest You