Afren reported a significant upgrade to Ebok volumetrics following full analysis of the Ebok-5 appraisal well results offshore Nigeria.
Ebok-5 appraisal well results
The Ebok-5 appraisal well, which was drilled by the Transocean's GSF Adriatic IX jack up drilling unit, was drilled to a total depth of 3,743 ft on the Ebok Fault Block West ("FBW"), with drilling operations completed on 17th November 2009. The well encountered a total gross oil column of 377 ft (comprising 323 ft in the D1 and LD-1E reservoir sands, in addition to a further 54 ft of gross oil pay in the D2 and LD-1F reservoirs).
The greater than expected oil column (particularly in the LD-1E reservoir) has led to an upgrade in volumetrics for FBW to 158 mmbbls STOIIP of which 40 mmbbls is estimated as recoverable (versus pre-drill estimates of 92 mmbbls STOIIP, 25 mmbbls recoverable). This increases total 2P Ebok recoverable reserve estimates to 93 mmbbls.
This reserves growth is an endorsement of Afren’s technical capabilities, and has been delivered through the deployment of Afren’s understanding and interpretation of the regional subsurface. The Ebok-5 well results will be fully integrated into Afren’s subsurface model and will further assist in de-risking the remaining 74 mmbbls appraisal potential at the Ebok field (with total resource potential of 167 mmbbls).
Post completion of the Ebok-5 appraisal well, the drilling rig re-located to the central area of the field and spudded the Ebok-6 appraisal well on 20th November 2009. The well is targeting an estimated 33 mmbbls STOIIP and 8 mmbbls recoverable in the D2 Southern Lobe. Following completion of the Ebok-6 well, Development Phase 1a drilling will commence.
The Phase 1a development plan comprises five horizontal oil production wells in the D2 reservoir, one horizontal oil production well targeting the D1 reservoir and one water injection well in the central Fault Block 1 and Fault Block 2 areas of the field. All wells will be drilled from a single field location via a Well-head Support Structure ("WSS") and mobile offshore production unit ("MOPU"). Fabrication of the WSS is complete and is in transit for delivery to the project. The Company is in the process of finalising contract discussions on the production facilities. Associated gas produced will be utilized as fuel for the facilities' power generation and as gas lift to assist well productivity.
Most Popular Articles
From the Career Center
Jobs that may interest you