Pan Orient's NSE-A4 Production in Thailand at 830 BOPD

Pan Orient has issued a production update for its Thailand assets.

NSE-A4 appraisal well (60% working interest and operator)

The NSE-A4 appraisal well was completed and put on production at a rate of approximately 830 bopd (0.05% water cut) after a number of difficulties related to the severity of the fracturing of the main volcanic reservoir which resulted in the loss of over 64,000 barrels of drilling fluid while attempting to complete the well on three side tracks. In the final completion, the production liner was unable to be set through the reservoir section after encountering an obstruction above the reservoir interval. A drill bit was attached to the end of the production tubing and drilled through to the top of the main reservoir. This production rate is noteworthy given that oil is being produced through production tubing with a drill bit still attached to the end of the tubing.

NSE-D1 appraisal well (60% working interest and operator)

After the installation of a larger diameter tubing pump, NSE-D1 is currently producing at an increased stabilised rate of approximately 1,063 bopd with an average water cut of approximately 0.28%. The NSE-D1 appraisal well, located approximately 455 meters north of the NSE-B drill pad, was originally announced on November 7, 2008, as producing 710 bopd prior to the installation of the larger pump.

NSE-D2 appraisal well (60% working interest and operator)

The NSE-D2 appraisal well encountered the top of the main volcanic reservoir at a depth of depth of 754 meters true vertical depth (TVD) approximately 330 meters north of the NSE-D1 location. Approximately 34 meters of highly fractured volcanic reservoir was drilled, with mud losses of approximately 1,200 barrels. The well has been put on test, flowing mainly gas with some oil, indicating close proximity to an interpreted oil water contact. Rig 14 is currently moving back onto this location to drill a side track approximately 10 to 15 meters structurally lower into the oil leg, at which time testing is expected to resume.

NSE-D3 appraisal well (60% working interest and operator)

The NSE-D3 appraisal well was drilled into the main volcanic reservoir at a depth of approximately 823 meters TVD and a sub surface location approximately 315 meters north west of the NSE-D1 location. A highly fractured volcanic reservoir section was encountered that resulted in over 6,000 barrels of drilling fluid losses. An 8 meter highly fractured oil stained core was cut through the main reservoir objective. A slotted liner is currently being set through the volcanic reservoir section and testing is anticipated to commence shortly.

NSE-C1 appraisal well (60% working interest and operator)

The NSE-C1 appraisal well encountered the top of the main volcanic objective at a depth of 775 meters TVD at location 1,248 meters east of the NSE-B drill pad in area targeting possible reserves as defined in the year end 2007 NI 51-101 compliant reserves report. Lost circulation was encountered within the main volcanic target with drilling fluid losses of approximately 1,900 barrels. Testing to determine the hydrocarbon potential of the volcanic reservoir at this location is anticipated to commence shortly.
 

Events  SUBSCRIBE TO OUR NEWSLETTER

Our Privacy Pledge
SUBSCRIBE


Most Popular Articles


From the Career Center
Jobs that may interest you
US Fort Lupton: Entry Level Technology Services Technician
Expertise: Production Engineering
Location: Fort Lupton, CO
 
Completions Engineer I Job
Expertise: Petroleum Engineering|Production Engineering|Workover or Completion
Location: Houston, TX
 
Technical Services Manager - Production Chemicals
Expertise: Chemist|Production Engineering|Technical Manager
Location: Midland, TX
 
search for more jobs

Brent Crude Oil : $50.97/BBL 1.53%
Light Crude Oil : $48.75/BBL 1.79%
Natural Gas : $2.92/MMBtu 0.68%
Updated in last 24 hours