Transerv Spuds Warro-6 Well in Warro Gas Field in Western Australia
Transerv Energy Ltd. disclosed Tuesday that Warro-6 well spud Sunday, Oct. 11 and is currently drilling ahead in 17.5 inch hole at 4,281 feet (1,305 meters) rotary table (RT). The spud of the well at the Warro gas field in Western Australia was later than anticipated due to mechanical issues during the rig move and set up.
Warro-6 is being drilled as a vertical well and is expected to reach a planned total depth of 14,107 feet (4,300 meters) RT in approximately 25 days. Warro-5 was drilled to 14,508 feet (4,422 meters) RT but did not penetrate the entire Warro reservoir section. Therefore, Warro-6 may be deepened to approximately 14,764 feet (4,500 meters) RT depending on the well results and timing.
Warro-6 is located 1.61 miles (2.6 kilometers) to the north of Warro-5 and 1.05 miles (1.7 kilometers) west south west (WSW) of Warro 3 and 4. Like Warro-5, the location of Warro-6 was chosen using the Warro 3D data to avoid and deep seating faulting.
WHAT DO YOU THINK?
Generated by readers, the comments included herein do not reflect the views and opinions of Rigzone. All comments are subject to editorial review. Off-topic, inappropriate or insulting comments will be removed.
- Transerv Successfully Completes Retesting Ops at Warro-4 Well in WA (Jul 12)
- Transerv, Norwest Join Hands to Drill Xanadu Prospect in Perth Basin Off WA (Jul 11)
- Transerv Continues Retesting Ops at Warro-4 Well in WA's Warro Gas Project (Jul 05)