Australia's Cue Energy Resources Ltd (Cue) reported Friday that the Manaia-2 well in the offshore Taranaki Basin, New Zealand is at a depth of 6,578 feet (2,005 meters) measured depth below rotary table (MDRT) at 0600 hours local time Oct. 18. Current operations are preparing to run and cement the 9.625 inch casing. Since the previous report, the wireline logging operation was successfully completed without incident.
During the wireline logging operation, fluid samples with indications of oil were recovered from the Moki Formation and several oil stained cores were recovered. Analysis of these samples is ongoing.
Manaia-2 is located in Petroleum Mining Permit (PMP) 38160 in the offshore Taranaki Basin, New Zealand. The well is operated by OMV New Zealand Ltd and is being drilled from the Kan Tan IV (mid-water semisub).
The well is located 0.78 miles (1.25 kilometers) north of Maui-4 (which discovered the Manaia field) and 3.73 miles (6 kilometers) to the southwest of the Maari Field well head platform. The well has a planned total depth of 9,350 feet (2,850 meters) and the program is now expected to take 58 days in total due to delays caused by adverse weather and rig repairs. The undeveloped Moki and Farewell Formation reservoirs that will be appraised by Manaia-2 have the potential to add 11 million barrels of gross reserves to the Manaia field.
Cue will provide weekly progress reports during the drilling of Manaia-2.
Participating interests in PMP 38160 are as follows:
WHAT DO YOU THINK?
Click on the button below to add a comment.
Generated by readers, the comments included herein do not reflect the views and opinions of Rigzone. All comments are subject to editorial review. Off-topic, inappropriate or insulting comments will be removed.
Most Popular Articles
From the Career Center
Jobs that may interest you