Australia's Otto Energy Limited, as operator of the producing Galoc oilfield joint venture offshore the Philippines, provided the following update Wednesday on the Galoc-5H and Galoc-6H drilling campaign in Service Cotnract (SC) 14C, part of the Galoc Phase II development project approved in 2012.
During the period from 0600 hours (AWST) Sept. 4 to 0600 hours (AWST) on Sept. 11, drilled the G-5H well 8.5 inch hole horizontally from 10,682 feet (3,256 meters) to 14,750 feet (4,496 meters). Results obtained from drilling logs indicate that the well is delivering in line with the pre-drill prognosis.
The forward plan is to continue drilling the G-5H well 8.5 inch hole horizontally through the reservoir interval and run the completion liner and assembly.
Location and Proposed Depth
The Galoc field is located in Service Contract SC14C (Galoc Sub Block) in 951 feet (290 meters) of water approximately 40 miles (65 kilometers) North West of Palawan Island and 217 miles (350 kilometers) south of Manila in the Republic of the Philippines. The Galoc-5H and Galoc-6H development wells are being drilled by the Ocean Patriot (mid-water semisub) within the existing producing field that has delivered over 10 million barrels of production since the field was commissioned in 2008.
The Galoc-5H and Galoc-6H development wells will be drilled to a total vertical depth of 7,185 feet (2,190 meters) with approximately 6,561 feet (2,000 meters) of horizontal completion. Drilling is expected to take approximately 115 days including the flowing of the wells for clean-up.
After drilling of both Galoc-5H and Galoc-6H is completed, the DOF operated Skandia Hercules construction vessel will be used to install the subsea equipment and complete the hook-up of both wells to the FPSO Rubicon Intrepid.
First oil from the Phase II wells is expected in November 2013.
WHAT DO YOU THINK?
Click on the button below to add a comment.
Generated by readers, the comments included herein do not reflect the views and opinions of Rigzone. All comments are subject to editorial review. Off-topic, inappropriate or insulting comments will be removed.
Most Popular Articles
From the Career Center
Jobs that may interest you