Ocean Patriot Prepares to Drill Galoc-5H Well
by Otto Energy Ltd.
|Wednesday, July 24, 2013
Otto Energy Limited, as operator of the producing Galoc oilfield joint venture offshore the Philippines, provided the following update on the Galoc-5H and Galoc-6H drilling campaign in SC14C, part of the Galoc Phase II development approved in 2012.
During the period from 0600 hours (AWST) July 17 to 0600 hours (AWST) July 24, cased and cemented the G-6H 9.625 inch hole section to 8,379 feet (2,554 meters). The Ocean Patriot (mid-water semisub) has been moved to the G-5 well and is currently running in hole to commence drilling the 12.25 inch hole section.
The forward plan is to drill the G-5H well 12.25 inch hole through to reservoir at approximately 8,202 feet (2,500 meters), then prepare to run and cement 9.625 inch casing.
Location and Proposed Depth
The Galoc field is located in Service Contract SC14C (Galoc Sub Block) in 951 feet (290 meters) of water approximately 40 miles (65 kilometers) North West of Palawan Island and 217 miles (350 kilometers) south of Manila in the Republic of the Philippines. The Galoc-5H and Galoc-6H development wells are being drilled within the existing producing field that has delivered over 10 million barrels of production since the field was commissioned in 2008.
The wells are being batch drilled in 1,020 feet (311 meters) of water. It is planned that the Galoc-5H and Galoc-6H development wells will be drilled to a total vertical depth of 7,185 feet (2,190 meters) with approximately 6,561 feet (2,000 meters) of horizontal completion. Drilling is expected to take approximately 115 days including the flowing of the wells for clean-up.
After drilling of both Galoc-5H and Galoc-6H is completed, the DOF operated Skandia Hercules construction vessel will be used to install the subsea equipment and complete the hook-up of both wells to the FPSO Rubicon Intrepid.
First oil from the Phase II wells is expected during 4Q 2013.
WHAT DO YOU THINK?
Generated by readers, the comments included herein do not reflect the views and opinions of Rigzone. All comments are subject to editorial review. Off-topic, inappropriate or insulting comments will be removed.
Most Popular Articles
From the Career Center
Jobs that may interest you