Otto Energy Limited, as operator of the producing Galoc oilfield joint venture offshore the Philippines, provided the following update on the Galoc-5H and Galoc-6H drilling campaign in SC14C, part of the Galoc Phase II development approved in 2012.
During the period from 0600 hours (AWST) June 26 to 0600 hours (AWST) July 3, 13.375 inch casing was cemented and pressure tested on G-6H. The 17.5 inch hole was drilled to 3,117 feet (950 meters) and 13.375 inch casing was run and cemented on G-5H.
The forward plan is to run the Blowout Preventer (BOP) with riser and connect to the wellhead on G-6H. Make up 12.25 inch Bottom Hole Assembly (BHA) and run in hole.
Location and Proposed Depth
The Galoc field is located in Service Contract SC14C (Galoc Sub Block) in 951 feet (290 meters) of water approximately 40 miles (65 kilometers) North West of Palawan Island and 217 miles (350 kilometers) south of Manila in the Republic of the Philippines. The Galoc-5H and Galoc-6H development wells are being drilled within the existing producing field that has delivered over 10 million barrels of production since the field was commissioned in 2008. Otto is drilling the wells using the Ocean Patriot (mid-water semisub).
The wells are being batch drilled in 1,020 feet (311 meters) of water. It is planned that the Galoc-5H and Galoc-6H development wells will be drilled to a total vertical depth of 7,185 feet (2,190 meters) with approximately 6,561 feet (2,000 meters) of horizontal completion. Drilling is expected to take approximately 115 days including the flowing of the wells for clean-up.
After drilling of both Galoc-5H and Galoc-6H is completed, the DOF operated Skandia Hercules construction vessel will be used to install the subsea equipment and complete the hook-up of both wells to the FPSO Rubicon Intrepid.
First oil from the Phase II wells is expected during Q4 2013.
WHAT DO YOU THINK?
Click on the button below to add a comment.
Generated by readers, the comments included herein do not reflect the views and opinions of Rigzone. All comments are subject to editorial review. Off-topic, inappropriate or insulting comments will be removed.
Most Popular Articles
From the Career Center
Jobs that may interest you