FX Energy, Inc. issued an update on two wells currently drilling in Poland.
The Kutno-2 well has been drilled to a total depth of 21,578 feet (6,577 meters). The next planned operation is to run a drill stem test ("DST") through the zones that had the best gas shows and porosity based upon drilling and log data from the wellbore. The DST is expected to begin within the next two to three weeks.
Kutno-2 is being drilled together with the Polish Oil and Gas Company (PGNiG). PGNiG will earn a 50% interest in the Kutno concession in connection with its participation in the Kutno-2 well.
The Frankowo-1 well has been drilled to a current depth of approximately 6,890 feet (2,100 meters). A DST in the top 92 feet (28 meters) of the Rotliegend sandstone reservoir, the primary target in the well, recovered gas cut brine and no free gas. The Company plans to continue drilling and coring the well to a total depth of 7,218 feet (2,200 meters) to determine the thickness and reservoir properties of the Rotliegend. This data will be critical to the Company's near term exploration plans for the 241,000 acre Block 246, where the Company holds a 100% interest.
After final coring and logging, the Company plans to plug the Rotliegend, then prepare and run a DST in the Main Dolomite, where a 149 foot thick section of gas saturated reef with good fracture and matrix porosity was encountered.
"We are fortunate to have the opportunity to explore Block 246," said Jerzy Maciolek, Vice President of International Exploration. "We selected this block because a large portion of it is unexplored and appears to have good hydrocarbon potential in the Main Dolomite, Rotliegend and Carboniferous. The Frankowo-1 well has given us encouraging data from both the Main Dolomite and the Rotliegend. Of course we are disappointed that the Rotliegend does not trap at this location, but hopeful about our upcoming test of the Main Dolomite."
The Frankowo-1 well is located on the Company's 100% owned Block 246 concession.
WHAT DO YOU THINK?
Click on the button below to add a comment.
Generated by readers, the comments included herein do not reflect the views and opinions of Rigzone. All comments are subject to editorial review. Off-topic, inappropriate or insulting comments will be removed.
Most Popular Articles
From the Career Center
Jobs that may interest you