USGS Report Shows No Evidence Linking Hydraulic Fracturing to Water
The two reports released by the U.S. Geological Survey (USGS) Wednesday provide no evidence that hydraulic fracturing has created impacts to groundwater, an EnCana Corp. spokesperson told Rigzone Friday.
"Furthermore and more importantly, [Environmental Protection Agency] has provided no sound scientific evidence that drilling has impacted domestic drinking water wells in the area," said spokesperson Doug Hock in an email statement.
Hock said there was nothing surprising about the USGS results, noting that USGS did a credible job of sampling, said Hock.
"More importantly, however, is the fact that USGS only sampled one of the two EPA monitoring wells (MW). This goes to the heart of concerns raised previously by state and federal agencies as well as Encana," said Hock.
The USGS report seemed to indicate that the agency declined to sample MW02 because the well could not provide a sample that was representative of actual water quality conditions, Hock said.
EPA has said that the USGS results are "generally consistent" with their own prior sampling, Hock noted. However, Encana's comparison of EPA's sampling of MW01 with the USGS sampling of the same well provides "a good reality check" on this statement.
A comparison of EPA reported detections in EPA Well MW01 and USGS results show that the USGS results are inconsistent with the EPA results on the levels of toluene, xylenes, isopropanol, diethylene glycol, triethylene glycol, 2-Butoxyethanol and acetone. The USGS did not detect these in its tests.
For two components - potassium and DRO - the USGS results show significant decreases in concentrations versus the EPA results, according to a comparison by Encana of EPA and USGS data.
With regard to its claims related to hydraulic fracturing, EPA has contended that the elevated pH levels are due to potassium hydroxide, which is sometimes used in hydraulic fracturing. However, potassium hydroxide was not used in hydraulic fracturing jobs in the Pavilion field and would actually have been detrimental to the types of fracs done in the Pavilion, said Hock.
"The elevated pH is more logically explained by the fact that EPA used cement slurry in setting the casing of its monitoring wells and screens without the use of a bentonite plug to keep the cement from leaking into the well itself," said Hock.
The plus is required for monitoring well construction for USGS and the Wyoming Department of Environmental Quality.
"The slurry entering the well is also the reason that clean samples couldn't be obtained from MW02," said Hock.
WHAT DO YOU THINK?
Generated by readers, the comments included herein do not reflect the views and opinions of Rigzone. All comments are subject to editorial review. Off-topic, inappropriate or insulting comments will be removed.
- EPA Chief Calls for Ending Wind Tax Credits to Help Coal Survive (Oct 10)
- EPA Asks Drillers, Miners for Advice on How to Regulate Them (Oct 03)
- US Coast Guard, EPA Cleaning Up A Dozen Texas Chemical Spills After Harvey (Sep 11)
Company: U.S. Geological Survey (USGS) more info
- USGS Releases First-Ever Maps of Induced, Natural Earthquake Hazards (Mar 28)
- USGS Estimates 21 Million Barrels at California's Monterey Formation (Oct 06)
- Oil, Gas Works on Solution to Reduce Freshwater in Fracking (Sep 15)