Testing Ops Completed at Brownstone's Llanos Well

Brownstone Energy Inc. announced that the operator has completed testing operations of the Flami-1 well at the Llanos 27 block and is now making an application to have the well put on extended production test.

The Flami-1 well is the second well drilled by NCT Energy Group C.A. Colombia, as official Operator of the Llanos 27 Block, along with Brownstone and its partners. The well commenced drilling on April 23, 2012 and was drilled with the Saxon 132 1,500 horsepower rig and was successfully drilled to a total depth of 9,300 feet on May 31, 2012. Well logs indicated an estimated 20 feet of potential gross oil pay in the Mirador formation and 22 feet in the Une formation. Testing operations of both the Une formation and Mirador formation have now concluded.

Une Formation Test

On June 21, 2012, the Company announced a new oil discovery in the Une formation of the Flami-1 well. Testing operations commenced on June 13, 2012 with the Une formation being perforated at the 9,086-9,100 foot interval.

Phase 1 of the test involved producing out the drilling control fluids and cleaning the wellbore. Over a 60 hour period, the well produced 1,514 barrels of oil per day (bopd) of 15.5 degree API oil with an average watercut of 13 percent. Cumulative oil production over those 60 hours was 3,786 barrels of oil.

Following Phase 1 of the test the well was shut in to perform a 24 hour pressure build-up test. During this time, the formation pressure was measured at 3,850 psi.

Phase 2 of the test involved periodically stepping up the total fluid production rate to observe watercut and overall fluid production. Cumulative production over a 73 hour period was 5,496 barrels of oil and was produced in the following stages:

  • Stage 1: Over an initial period of 29 hours the well produced 1,403 bopd (1,695 total over 29 hours) with an average watercut of 20 percent;
  • Stage 2: The drawdown rate was increased and over a period of 20 hours the well produced 1,832 bopd (1,527 total over 20 hours) with a watercut of 12 percent;
  • Stage 3: The drawdown rate was increased and over a period of 15 hours the well produced 2,160 bopd (1,350 total over 15 hours) with a watercut of 12 percent;
  • Stage 4: The drawdown rate was increased and over a period of 9 hours the well produced 2,464 bopd (924 total over 9 hours) with a 12 percent watercut.

These test results are preliminary and are not necessarily an indication of the longer-term potential of the well. Additional tests will be performed once the well can be placed on an extended test.

Mirador Formation Test

Testing operations commenced on July 1, 2012 with the Mirador formation being perforated at the 8,364-8,372 foot interval. Over a 48 hour test, the Mirador formation produced a total of 510 barrels of oil and 1,448 barrels of water. The calculated average daily rate over the two days was 299 bopd, and 899 BWPD for a 75 percent watercut.

Given the lower productivity and higher watercut of the Mirador formation, it was decided to terminate testing of the Mirador formation and move towards an application to place the Une formation of the well on extended production test.

The well will now be shut in while an application is made to the Ministry of Mines and Energy in Colombia to put the well on an extended test. This application approval is expected to take up to six weeks, at which time the well can be put back on production and oil from the extended test sold to market.

Brownstone is paying 50 percent of the total cost of the well and will earn 45.275 percent of production before payout and 34.25 percent of production after payout under a private participating interest agreement.


Click on the button below to add a comment.
Post a Comment
Generated by readers, the comments included herein do not reflect the views and opinions of Rigzone. All comments are subject to editorial review. Off-topic, inappropriate or insulting comments will be removed.


Our Privacy Pledge

Most Popular Articles

From the Career Center
Jobs that may interest you
Petroleum / Facilities Engineering Specialist - Offshore
Expertise: Petroleum Engineering
Location: Houston, TX
Petroleum Engineer
Expertise: Petroleum Engineering
Location: Houston, TX
Reservoir Engineering (Oil / Gas Reservoir Management)
Expertise: Reservoir Engineering
Location: Houston, TX
search for more jobs

Brent Crude Oil : $51.78/BBL 0.77%
Light Crude Oil : $50.85/BBL 0.83%
Natural Gas : $2.99/MMBtu 4.77%
Updated in last 24 hours