EQUIPMENT MARKETPLACE
SEARCH MARKETPLACE
SUBSCRIBE
Outside Plant Services
Outside Plant Services was founded in 2009, and is located at 5803 Vestavia Dr in Houston.We buy, sell, locate and repair New and Used Oilfield Equipment.
Company Location:
Outside Plant Services
12702 Haynes Rd
Houston   TX   77066
United States
Contact Details:
Robert Christian
Phn: 281-635-2711
Fax: 713 481 0958

111 ads found    Page 1 of 3

For Sale: MANIFOLD TRAILER
2012 ELITE 40'L Single Axle Manifold Trailer VIN: 5MKSM4218C001 3260 w/ (1) Manifold w/ (4) Outlets, (3) Outlets w/ (10) Outlets Each,   Hydraulic Landi no Gear, 70R22.5 Ti res.  TX 0158-575 ...
Location: TEXAS Date Posted: Wednesday, May 10, 2017
Condition: READY TO WORK Price: POR
view details
For Sale: DATA VAN
2006 KENWORTH T-300 Single Axle Data Van VIN: 2NKMHZ7X96M145324 p/b DieselEngine w/ Automatic Transmission, Leather Bucket Seats, AJC , Heat, AM/FM CD, COBRA CB, 8'6'W x 28'L Data Van wl Slideout, Data Acquisition Electronics Package,(9) 17" Monitors, SONY Flat Screen TV, BROTHER Color Printer, CUMMINS DSKCA 25 Kw. AC Generator S/N B1304J8084, 75R22.5 Tires. TX K03-1481 ROLLIGON REMANUFACTURED 2013...
Location: TEXAS Date Posted: Wednesday, May 10, 2017
Condition: READY TO WORK Price: POR
view details
For Sale: 120 BPM Blender
2 EACH IDENTICAL UNITS AVAILABEL 2013 ROLLIGON MT-1060 8'6"W x 39'L Tandem Axle Blender VIN: 1R9S03928CA494035 w/ MISSION Magnum XP 14" x 12" Centrifugal Pump p/b CUMMINS Diesel Engine w/ Hydraulic Start, Radiator, Gauges, EATON FULLER Transmission, (3) Hydraulic Pumps p/b CUMMINS QSM11Diesel Engine w/ Electric Start, Radiator, Gauges, GARDNER DENVER 10" x 10" Centrifugal Pump p/b Hydraulic Motor, Operators Station w/ Controls & Gauges, Auger, 4'W x 8'L Sand Tub w/ (3) Hydraulic Raising Rams, (2) Manifolds w/ (12) Outlets, (2) Manifolds w/ (8) Outlets, Manual Landing Gear, Air Ride, Air Brakes, 11R22.5 Tires....
Location: TEXAS Date Posted: Tuesday, May 09, 2017
Condition: READY TO WORK Price: POR
view details
For Sale: Complete Pressure Pumping Company
Complete Pressure Pumping Company For Sale Ready to go to Work 29 FRACK PUMPS ROLLIGON CONTROLS 14 TRIPLEX FRAC PUMPS 2250 HP 15 QUINTEPLX FRAC PUMPS 44 TRUCK TRACTORS- SOME SLEEPER SOME DAY CAB 2 LINE TRUCKS 1 BODY LOAD CRANE/LINE TRUCK 1 TRAILER/CRANE LINE MISC TRAILERS TANDEM AXLE HOSE TRAILER TANDEM ACLE EQUIPMENT TRAILER GAYLEAN 4500 GALLON GEL TRAILER WORELEY 4100 GALLON TRANSPORT TRAILER KENTUCKY BOX TRAILER LOADED WITH CONSUMABLES SINGLE AXLE SAND SUPPLY TRAILER DATA VANS/TRAILERS 2006 KENWORTH W/SLIDE OUT (REMAN BY ROLLIGON 2013) 2011 JEREH TANDEM AXLE DATS TRAILER (REMAN BY ROLLIGON 2015) 8 SAND HOG TRAILERS 3 CHEM ADD TRAILERS (10 TOTE CAPACITY WITH CONTROL STATIONS) 3 FRAC MANIFOLD TRAILERS 3 EACH 2012 – 2013 BLENDERS 4 Each 2011-2013 HYDRATION UNITS 2 EACH SAND CONVEYOR TRAILERS We can schedule an inspection and have all equipment running upon arrival. Good running equipment. Many parts, consumables, and extra lines are included with the package. MANY UNITS HAVE LOW HOURS AND HAVE BEEN REBUILT !!!! ...
Location: TEXAS Date Posted: Tuesday, April 18, 2017
Condition: Good Ready to Work Price: POR
view details
For Sale: 2 INCH COILED TUBING ASSETS FOR SALE
2008 K.enworth Model T800, VIN xxxxxxxxxxxxxx. Heavy duty,3 axle, pto driven hydraulic unit/lines to trailer and Kubota OLl 1000 generator.Odometer indicates 140k miles 2008 Stewart Stevenson Mode11T100.HC skidded power unit, SN. xxxxxxxxxxxxxx; 100k lb.injector head; tubing reel unit w/2"coil tubing; BOP; control room, etc.mounted on Stewart Stevenson heavy duty drop deck trailer, VIN xxxxxxxxxxxxxx 2008 Stewart Stevenson Model WTt 002,SN.WTl xxxxxxxxxxxxxx; twin Detroit Diesel engines, (2) Stewart Stevenson triplex pumps/fluid ends; 2008 Mertz 203060740 trailer,VIN xxxxxxxxxxxxxx 2008 Stewart Stevenson Model NT-181-NF, SN. NT185763755020708; Cryogenic Vessel Alt. 2.8-4.5-TM tank, Detroit Diesel power, Lufkin 48' trailer,VIN xxxxxxxxxxxxxx 2008 Kenworth Model T800, VIN xxxxxxxxxxxxxx 1488. Heavy duty, 3 axle, pto driven hydraulic unit/lines to trailer and generator (less generator unit). Odometer reads 126k miles 2008 Stewart Stevenson Model Tf l00-HC skidded power unit, SN.xxxxxxxxxxxxxx; 10Ok lb.injector head; tubing reel unit w/2" coil tubing; BOP; control room, etc. motmted on Stewart Stevenson heavy duty drop deck trailer, VIN xxxxxxxxxxxxxx 2008 Stewart Stevenson Model WTl 002, SN.WTl xxxxxxxxxxxxxx; twin Detroit Diesel engines, (l) SPM WS-600 triplex pmnp/fluid end, (1) MSI Triplex pump/fluid end; 2007 Mertz 203060740 trailer, VIN xxxxxxxxxxxxxx 2008 Stewart Stevenson Model NT-181-NF, SN. xxxxxxxxxxxxxx; Cryogenic Vessel Alt 2.8-4.S-TM tank, Detroit Diesel power, Lufkin 48'trailer, VIN xxxxxxxxxxxxxx 2 COMPLETE SPREADS INCLUDING 1 BOP THERE ARE SOME REPAIRS ON UNITS THAT WILL BE REQUIRED BEFORE PUTTING THEM TO WORK. STEWART AND STEVENSON HAS QUOTE $350,000.00 PER COIL UNIT TO REPAIR AS NEEDED. BANK REPO $900,000.00 BUYS ALL 8 PIECES 2 TRACTORS 2 CT UNITS 2 TWIN PUMP TRAILERS 2 NITROGEN UNITS...
Location: LOUISIANA Date Posted: Wednesday, March 29, 2017
Condition: USED Price: $900,000.00
view details
For Sale: CROWN 750 HP TRAILER TOP DRIVE DRILLING RIG 2006 MODEL
RIG 35 DRAWWORKS: Crown CC750SD 750 HP Powered by (2) Caterpillar C-18 575 HP engines w/ Allison 5610H transmissions AUXILIARY BRAKE: Eaton 424WCBD MAST: Crown Telescoping 118’ 350,000 lbs SHL on 8 lines SUBSTRUCTURE: Crown Telescoping w/15’ floor height TRAVELING EQUIPMENT: BLOCK HOOK: Ideco UTB-160, 160 ton ROTARY TABLE: Hacker 20.5” COMPOUND: Crown 2 engine ENGINES/GENERATORS: 2 - Caterpillar C-18 / Caterpillar 545kW generators MUD PUMPS: 2 - National Oilwell 9-P-100, 1000 HP Each powered by (1) Caterpillar 3508 MUD SYSTEM: 2 tank, 600 Bbl w/ 75 Bbl pre-mix included SOLIDS CONTROL EQUIPMENT: SHAKERS: 2 - National DLMS-285P-LP DESANDER: National DSN-2H-10CTX BOP EQUIPMENT: ANNULAR: 11” X 5M DOUBLE: 11” X 5M CHOKE MANIFOLD: 4” x 2” 5000 PSI CLOSING UNIT: Advanced Pressure 5 station, 100 gallon AUXILIARY EQUIPMENT: Water Tank: 500 Bbl Fuel Tank: 11,000 gallons Trip Tank: 100 Bbl Hyd. Hoists: 2 - Braden PD12C Air Hoist: 1 - Ingersoll Rand K4U Pipe Spinner: Hawk 550-H Wireline Machine: Five Star TOP DRIVE: Tesco 250HMI, 250 ton OPTIONAL EQUIPMENT FOR ADDITIONAL COST TUBULARS: Drill Pipe: 12,000’ 4 ½” Drill Pipe Drill Collars: 2 – 8” Slick Drill Collars 12 – 6 ¼” Slick Drill Collar ...
Location: OKLAHOMA/LOUISIANA Date Posted: Wednesday, March 29, 2017
Condition: READY TO GO TO WORK Price: $850,000.00
view details
For Sale: Crown CC750SD 2006 750 HP TOP DRIVE DRILLING RIG
RIG 24 DRAWWORKS: Crown CC750SD 750 HP Powered by (2) Caterpillar C-16 550 HP engines w/ Allison 5610H transmissions AUXILIARY BRAKE: Eaton 424WCBD MAST: Crown Telescoping 118’ 350,000 lbs SHL on 8 lines SUBSTRUCTURE: Crown Telescoping w/15’ floor height TRAVELING EQUIPMENT: BLOCK HOOK: Ideco UTB-160, 160 ton ROTARY TABLE: Hacker 20.5” COMPOUND: Crown 2 engine ENGINES/GENERATORS: 2 - Caterpillar C-15 / Caterpillar 455kW generators MUD PUMPS: 2 - National Oilwell 9-P-100, 1000 HP Each powered by (1) Caterpillar 3508 MUD SYSTEM: 2 tank, 600 Bbl w/ 75 Bbl pre-mix included SOLIDS CONTROL EQUIPMENT: SHAKERS: 2 - Mi Swaco Mongoose PT DESILTER: National BOP EQUIPMENT: ANNULAR: 11” X 5M DOUBLE: 11” X 5M CHOKE MANIFOLD: 4” x 2” 5000 PSI CLOSING UNIT: Advanced Pressure 5 station, 100 gallon AUXILIARY EQUIPMENT: Water Tank: 500 Bbl Fuel Tank: 14,000 gallons Trip Tank: 100 Bbl Hyd. Hoists: 2 - Braden PD12C Air Hoist: 1 - Ingersoll Rand HU40 Pipe Spinner: Hawk 550-H Wireline Machine: Five Star TOP DRIVE: Tesco 250HMI, 250 ton OPTIONAL ITEMS FOR ADDITIONAL COSTS TUBULARS: Drill Pipe: 12,000’ 4 ½” Drill Pipe Drill Collars: 2 – 8” Slick Drill Collars 12 – 6 ¼” Drill Collars ...
Location: OKLAHOMA/LOUISIANA Date Posted: Wednesday, March 29, 2017
Condition: USED GOOD OPERATING CONDITION Price: $850,000.00
view details
For Sale: CROWN TOP DRIVE 750 HP TRAILER RIG 2005 MODEL
RIG 014 DRAWWORKS: Crown CC750SD 750 HP Powered by (2) Caterpillar C-16 550 HP engines w/ Allison 5610H transmissions AUXILIARY BRAKE: Eaton Airflex 424 MAST: Crown Telescoping 118’ 350,000 lbs SHL on 8 lines SUBSTRUCTURE: Crown Telescoping w/16’ floor height TRAVELING EQUIPMENT: BLOCK-HOOK: Ideco UTB-160, 160 ton ROTARY TABLE: Hacker 20.5” COMPOUND: Crown 2 engine ENGINES/GENERATORS: 2 - Caterpillar C-18 / Caterpillar 545kW generators MUD PUMPS: 2 - Emsco FB1000 type, 1000 HP Each powered by (1) Caterpillar 3512A w/ Oil Works C-300-100 torque converter MUD SYSTEM: 2 tank, 600 Bbl w/ pit roofs SOLIDS CONTROL EQUIPMENT: SHAKERS: 2 - Mi Swaco Mongoose PT DESANDER: National DSN-2H-10CTX DESILTER: National DSLR-16GG-4CTX BOP EQUIPMENT: ANNULAR: 11” X 5M DOUBLE: 11” X 5M CHOKE MANIFOLD: 3” x 3” 5000 PSI B.O.P. CLOSING UNIT: Koomey 5 station, 100 gallon AUXILARY EQUIPMENT: Water Tank: 440 Bbl Fuel Tank: 14,000 gallons Hyd. Hoists: 2 - Braden PD12C Air Hoist: 1 - Ingersoll Rand HU40 Pipe Spinner: Hawk 550-H Wireline Machine: Five Star Hydraulic Retriever TOP DRIVE: FDS 2519HD-NRNE, 250 ton FOR ADDITIONAL COSTS THE FOLLOWING CAN BE INCLUDED: TUBULARS: Drill Pipe: 12,000’ 4 ½ Drill Pipe Drill Collars: 2 – 8” Slick Drill Collars 12- 6 ¼” Slick Drill Collars ...
Location: OKLAHOMA/LOUISIANA Date Posted: Wednesday, March 29, 2017
Condition: READY TO GO TO WORK Price: $850,000.00
view details
For Sale: CROWN 750 HP TRAILER RIG 2005 MODEL
DRAWWORKS: Crown CC750SD 750 HP Powered by (2) Caterpillar C-16 550 HP engines w/ Allison 5610H transmissions AUXILIARY BRAKE: McKinney 2311CCW MAST: Crown Telescoping 118’ 300,000 lbs SHL on 8 lines SUBSTRUCTURE: Crown Telescoping w/15’ floor height TRAVELING EQUIPMENT: BLOCK-HOOK: Ideco UTB-160, 160 ton ROTARY TABLE: Hacker 20.5” COMPOUND: Crown 2 engine ENGINES/GENERATORS: 2 - Caterpillar C-15 / Caterpillar 455kW generators MUD PUMPS: 2 – National 9P-100, 1000 HP Each powered by (1) Caterpillar 3508C MUD SYSTEM: 2 tank, 600 Bbl w/ 75 Bbl pre-mix included SOLIDS CONTROL EQUIPMENT: SHAKERS: 2 - National DLMS-285P-LP DESANDER: National DSN-2H-10CTX BOP EQUIPMENT: ANNULAR: 11” X 5M DOUBLE: 11” X 5M CHOKE MANIFOLD: 3” x 2” 5000 PSI B.O.P. CLOSING UNIT: Advanced Pressure 5 station, 100 gallon AUXILARY EQUIPMENT: Water Tank: 440 Bbl Fuel Tank: 9,000 gallons Trip Tank: 100 Bbl Hyd. Hoists: 2 - Braden PD12C Air Hoist: 1 - Ingersoll Rand HU40 Pipe Spinner: Hawk 550-H Wireline Machine: Five Star Hydraulic Retriever TOP DRIVE: Tesco 250HMI, 250 ton OPTIONAL ADDITIONAL COST: TUBULARS: Drill Pipe: 12,000 4 ½ 16.60 DP Drill Collars: 2 -8” Slick Drill Collars 12 – 6 ¼ Slick Drill Collars ...
Location: OKLAHOMA/LOUISIANA Date Posted: Wednesday, March 29, 2017
Condition: READY TO WORK Price: $850,000.00
view details
For Sale: Twin Cement Pumps on Trailer
Twin pumpers available some ready to go others with some work will be good units. Priced right!!! Available in Texas. ...
Location: Texas Date Posted: Monday, December 19, 2016
Condition: used ready to go or serviceable Price: POR
view details
For Sale: COOLING TRAILER
FULLY OPERATIONAL COOLING TRAILER WITH EVAPORATIVE COOLER. DIRECT HOSE CONNECTION OR WATER TOTE CAPABILITIES. 120 VAC FAN AND PUMP MOTORS.3 AVAILABLE...
Location: HOUSTON 77066 Date Posted: Thursday, July 28, 2016
Condition: USED GOOD OPERATING CONDITION Price: $6000
view details
For Sale: CAT C4.4 TIER 3 127 HP POWER UNIT
NEW UNUSED SURPLUS TIER3 RADIATOR TO FLYWHEEL VARIABLE SPEED DIESEL POWER ENGINE. AFTER JANUARY 1, 2017 YOU WILL BE UNABLE TO PURCHASE A TIER 3 ENGINE FOR DOMESTIC USE. NEW TIER 4 ENGINES ARE ESTIMATED TO COST $45,000 TO $50,000/EACH INCLUDING START UP. THESE ENGINES ARE STILL UNDER FACTORY WARRANTY. 27 AVAILABLE DISCOUNT FOR LOT PURCHASE...
Location: TEXAS Date Posted: Thursday, June 02, 2016
Condition: NEW UNUSED Price: $10,000
view details
For Sale: CAT D399 GENERATOR 850 KW PRIME
CAT D399 RECENTLY REBUILT BY QUINN CAT, CA. 270 HRS. 480 V 3 PHASE 850 KW PRIME. WITH REMOTE RADIATOR WITH ELECTRIC MOTOR FREIGHT TO PORT OF HOUSTON $1500....
Location: CHICKASHA, OKLAHOMA Date Posted: Thursday, June 02, 2016
Condition: EXCELLENT RUNNER Price: $20,000
view details
For Sale: WELL SERVICE PUMP GARDNER DENVER TEE
GARDNER DENVER TEE WITH 471 CEMENTING PUMP 3 INCH WITH TANK AND VALVES...
Location: TEXAS Date Posted: Tuesday, May 31, 2016
Condition: USED RUNNER Price: 35000
view details
For Sale: 2001 Peterbilt Bobtail Dual Tandem 80 BBL Vacuum Truck with Challenger Pump.
2001 Peterbilt Bobtail Dual Tandem 80 BBL Vacuum Truck with Challenger Pump. Low Mileage. Hydraulic Gate and Dump. Ready to work...
Location: HOUSTON Date Posted: Sunday, May 01, 2016
Condition: USED GOOD Price: $45,000.00
view details
For Sale: Spencer Harris 500 HP 7000 FT RIG
Spencer Harris 6000 Trailer Rig CAT 3406 Power, 250,000 Hook Load 97 ft 8 in clearance Crown to Floor Racking capacity 6000 ft 4 1/2 in drill pipe. 17 1/2" Rotary Table, 50 KW Generator House With Tool Storage, Top Dog House mounts on top of Diesel/Water Tank, Continental Emsco D500 Duplex Mud Pumps powered by CAT 3412. GA 750 DUPLEX MUD PUMP POWERED BY CAT D379, 150 Ton Block, DRILLER SIDE PITS 400 bbl 2 PIT SYSTEM WITH SHAKER, DESILTER, DESANDER, 3500 feet 4 1/2 inch drill pipe ungraded. Last Drilled August 2015 GOOD FOR OIL OR WATER....
Location: HOUSTON Date Posted: Sunday, May 01, 2016
Condition: USED COMPLETE RIG Price: POR
view details
For Sale: CROWN CE 900 TOP DRIVE SCR DRILLING RIG
MANUFACTURED IN 2007 READY TO GO TO WORK 2 SISTER RIGS AVAILABLE ULTRA FAST MOVING RIGS HYDRAULIC CATWALK, DRILL PIPE AND COLLARS CAN BE ADDED TO RIG INVENTORY DRAWWORKS: Crown CE900E 900 HP Powered by (1) GE 752 motor AUXILIARY BRAKE: Eaton Airflex 236 MAST: Crown Telescoping 118’ 440,000 lbs on 10 Lines SUBSTRUCTURE: Crown Telescoping w/ 18’ floor height TRAVELING EQUIPMENT: BLOCK HOOK: Ideco UTB 265-5-36, 265 ton ROTARY TABLE: Hacker 20.5” Independent Drive DRIVE SYSTEM: Ross Hill 3 x 4 SCR Model 1400 ENGINE/GENERATORS: 3 - Caterpillar 3508C / Kato 902kW generators MUD PUMPS: 2 - National Oilwell 9-P-100, 1000 HP Each powered by (1) GE 752 motor MUD SYSTEM: 2 Tank, 600 Bbl w/ 75 Bbl pre-mix included SOLIDS CONTROL EQUIPMENT: SHAKERS: 2 - Mi Swaco Mongoose PT DEGASSER: National DG-ATM-6-4-460-60 DESANDER: National 2 cone DESILTER: National DSL-12GG-4CTX BOP EQUIPMENT: ANNULAR: Shaffer Style Spherical 11” – 5K WP DOUBLE: Shaffer LWS type 11” – 5K WP CHOKE MANIFOLD: 3” x 3” 5000 PSI CLOSING UNIT: Advanced Pressure 5 station, 120 gallon AUXILIARY EQUIPMENT: Water Tank: 500 Bbl Fuel Tank: 12,000 gallons Trip Tank: 100 Bbl Hyd. Hoist: 2 - Braden PD12C Air Hoist: 1 - Ingersoll Rand HU-40 Pipe Spinner: Hawk 550-H Wireline Machine: Millennium Surveyor TOP DRIVE: Tesco 250HMI, 250 ton ...
Location: OKLAHOMA/LOUISIANA Date Posted: Sunday, May 01, 2016
Condition: USED WORKING RIGS READY TO GO Price: POR
view details
For Sale: 1000 HP AC TOP DRIVE RIG WITH SKIDDING
WELL MAINTAINED READY TO GO RIG WITH SKIDDING DRAWWORKS: IDM AC 1000 1000 HP Powered by (1) GE 1500 HP AC motor MAST: IDM 136’ 550,000 lbs SHL on 10 lines SUBSTRUCTURE: IDM Telescoping w/ 22’ floor height 550,000 lbs rotary w/ 400,000 lbs setback TRAVELING EQUIPMENT: BLOCK: American Block B42E350, 350 ton ROTARY TABLE: American Block RK 27.5 Independent Drive DRIVE SYSTEM: IDM 3 x 5 AC VFD Model 2400 Highline Power Capabilities ENGINE/GENERATORS: 2 - Caterpillar 3512C / Caterpillar 1225kW generators 1 - Caterpillar 3508C / Caterpillar 840kW generator MUD PUMPS: 2 - Emsco FB1300 type, 1300 HP Each powered by (1) GE 1500 HP motor MUD SYSTEM: 2 tank, 1000 Bbl w/ 100 Bbl pre-mix included w/ pit roofs SOLIDS CONTROL EQUIPMENT: SHAKERS: 2 - Mi Swaco Mongoose PT DEGASSER: National DG-ATM DESANDER: National DSN-2V-10CTX DESILTER: National DSLR-16GG-4CTX BOP EQUIPMENT: ANNULAR: Shaffer Style Spherical 11” – 5K WP DOUBLE: Cameron Type U 11” – 10K WP SINGLE: Cameron Type U 11” – 10K WP CHOKE MANIFOLD: 4” x 3” 10000 PSI CLOSING UNIT: Advanced Pressure 6 station, 180 gallon AUXILIARY EQUIPMENT: Water Tank: 500 Bbl Fuel Tank: 14,000 gallons Trip Tank: 100 Bbl Hyd. Hoist: 2 - Braden PD12C Pipe Spinner: Hawk 950-H Wireline Machine: Five Star TOP DRIVE: Canrig 6027AC, 275 ton MULTI-WELL PAD SITE: Beam Rail Skidding System Capabilities: 120’ TUBULARS: Drill Pipe: 5” Drill Pipe Drill Collars: ...
Location: TEXAS Date Posted: Friday, April 29, 2016
Condition: USED WORKING RIG READY TO GO Price: $7,000,000.00
view details
For Sale: CE 750 2006 TOP DRIVE TRAILER RIG
COMPLETE READY TO GO RIG WITH DRILL PIPE DRAWWORKS: Crown CC750SD 750 HP Powered by (2) Caterpillar C-15 575 HP engines w/ Allison 5610H transmissions AUXILIARY BRAKE: Eaton 424WCBD MAST: Crown Telescoping 118’ 350,000 lbs SHL on 8 lines SUBSTRUCTURE: Crown Telescoping w/15’ floor height TRAVELING EQUIPMENT: BLOCK HOOK: Ideco UTB-160, 160 ton ROTARY TABLE: Hacker 20.5” COMPOUND: Crown 2 engine ENGINES/GENERATORS: 2 - Caterpillar C-18 / Caterpillar 545kW generators MUD PUMPS: 2 - National Oilwell 9-P-100, 1000 HP Each powered by (1) Caterpillar 3508 MUD SYSTEM: 2 tank, 600 Bbl w/ 75 Bbl pre-mix included SOLIDS CONTROL EQUIPMENT: SHAKERS: 2 - National DLMS-285P-LP DESANDER: National DSN-2H-10CTX BOP EQUIPMENT: ANNULAR: 11” X 5M DOUBLE: 11” X 5M CHOKE MANIFOLD: 4” x 2” 5000 PSI CLOSING UNIT: Advanced Pressure 5 station, 100 gallon AUXILIARY EQUIPMENT: Water Tank: 500 Bbl Fuel Tank: 11,000 gallons Trip Tank: 100 Bbl Hyd. Hoists: 2 - Braden PD12C Air Hoist: 1 - Ingersoll Rand K4U Pipe Spinner: Hawk 550-H Wireline Machine: Five Star TOP DRIVE: Tesco 250HMI, 250 ton TUBULARS: Drill Pipe: 12,000’ 4 ½” Drill Pipe Drill Collars: 2 – 8” Slick Drill Collars 12 – 6 ¼” Slick Drill Collar ...
Location: OKLAHOMA Date Posted: Thursday, April 28, 2016
Condition: USED WORKING RIGS READY TO GO Price: $1.3M
view details
For Sale: CROWN 1000 HP SCR TOP DRIVE DRILLING RIG
BUILT IN THE UNITED STATES DRAWWORKS: Crown CE900E 900 HP Powered by (1) GE 752 motor AUXILIARY BRAKE: Eaton Airflex 236 MAST: Crown Telescoping 118’ 440,000 lbs on 10 Lines SUBSTRUCTURE: Crown Telescoping w/ 18’ floor height TRAVELING EQUIPMENT: BLOCK HOOK: Ideco UTB 265-5-36, 265 ton ROTARY TABLE: Hacker 20.5” Independent Drive DRIVE SYSTEM: Ross Hill 3 x 4 SCR Model 1400 ENGINE/GENERATORS: 3 - Caterpillar 3508C / Kato 902kW generators MUD PUMPS: 2 - National Oilwell 9-P-100, 1000 HP Each powered by (1) GE 752 motor MUD SYSTEM: 2 Tank, 600 Bbl w/ 75 Bbl pre-mix included SOLIDS CONTROL EQUIPMENT: SHAKERS: 2 - Mi Swaco Mongoose PT DEGASSER: National DG-ATM-6-4-460-60 DESANDER: National 2 cone DESILTER: National DSL-12GG-4CTX BOP EQUIPMENT: ANNULAR: Shaffer Style Spherical 11” – 5K WP DOUBLE: Shaffer LWS type 11” – 5K WP CHOKE MANIFOLD: 3” x 3” 5000 PSI CLOSING UNIT: Advanced Pressure 5 station, 120 gallon AUXILIARY EQUIPMENT: Water Tank: 500 Bbl Fuel Tank: 12,000 gallons Trip Tank: 100 Bbl Hyd. Hoist: 2 - Braden PD12C Air Hoist: 1 - Ingersoll Rand HU-40 Pipe Spinner: Hawk 550-H Wireline Machine: Millennium Surveyor TOP DRIVE: Tesco 250HMI, 250 ton WITH OR WITHOUT DRILL PIPE...
Location: OKLAHOMA Date Posted: Monday, March 28, 2016
Condition: USED WORKING RIG READY TO GO TO WORK Price: POR
view details
For Sale: 1000 HP AC TOP DRIVE RIG WITH SKIDDING
DRAWWORKS: IDM AC 1000 1000 HP Powered by (1) GE 1500 HP AC motor MAST: IDM 136’ 550,000 lbs SHL on 10 lines SUBSTRUCTURE: IDM Telescoping w/ 22’ floor height 550,000 lbs rotary w/ 400,000 lbs setback TRAVELING EQUIPMENT: BLOCK: American Block B42E350, 350 ton ROTARY TABLE: American Block RK 27.5 Independent Drive DRIVE SYSTEM: IDM 3 x 5 AC VFD Model 2400 Highline Power Capabilities ENGINE/GENERATORS: 2 - Caterpillar 3512C / Caterpillar 1225kW generators 1 - Caterpillar 3508C / Caterpillar 840kW generator MUD PUMPS: 2 - Emsco FB1300 type, 1300 HP Each powered by (1) GE 1500 HP motor MUD SYSTEM: 2 tank, 1000 Bbl w/ 100 Bbl pre-mix included w/ pit roofs SOLIDS CONTROL EQUIPMENT: SHAKERS: 2 - Mi Swaco Mongoose PT DEGASSER: National DG-ATM DESANDER: National DSN-2V-10CTX DESILTER: National DSLR-16GG-4CTX BOP EQUIPMENT: ANNULAR: Shaffer Style Spherical 11” – 5K WP DOUBLE: Cameron Type U 11” – 10K WP SINGLE: Cameron Type U 11” – 10K WP CHOKE MANIFOLD: 4” x 3” 10000 PSI CLOSING UNIT: Advanced Pressure 6 station, 180 gallon AUXILIARY EQUIPMENT: Water Tank: 500 Bbl Fuel Tank: 14,000 gallons Trip Tank: 100 Bbl Hyd. Hoist: 2 - Braden PD12C Pipe Spinner: Hawk 950-H Wireline Machine: Five Star TOP DRIVE: Canrig 6027AC, 275 ton MULTI-WELL PAD SITE: Beam Rail Skidding System Capabilities: 120’ TUBULARS: Drill Pipe: 5” Drill Pipe PHOTOS AVAILABLE UPON REQUEST ...
Location: TEXAS Date Posted: Tuesday, March 01, 2016
Condition: USED WORKING RIGS READY TO GO Price: POR
view details
For Sale: GARDNER DENVER PZ-9 MUD PUMP
GARDNER DENVER PZ9 TRIPLEX MUD PUMP GOOD RUNNER POWERED BY CAT 3508 THROUGH A NATIONAL 300 TORQUE CONVERTOR COMPLETE READY TO GO ...
Location: TEXAS Date Posted: Thursday, January 21, 2016
Condition: USED GOOD Price: 75000
view details
For Sale: Crown CC750SD 750 HP DRILLING RIGS
JUST OFF CONTRACTS MAR 2015 Crown CC750SD 750 HP Powered by (2) Caterpillar C-18’s with Allison transmissions w/ Eaton 424WCBD AUX BRAKE Crown telescoping Mast, 118’ 350,000 LB SHL on 8 lines with Crown telescoping Substructure w/15’ floor height, Ideco UTB-160 Block Hook, Hacker 20.5” Rotary table Complete Generator House w/2 - Caterpillar C-15 / Caterpillar generators 455kW/ / air compressors and complete motor control center Mud Pumps 2- National 9-P-100 1000 HP Each powered by Caterpillar 3508B w/torque converters and chain drive 2 tank, 1000 Bbl Mud System w/ 100 Bbl pre-mix included with pit roofs w/ 2 shakers, Desander and desilter Well Control, 11 inch 5000 psi Double BOP w 11 inch 5000 psi annular, 5 Station 100 gallon Closing Unit Skidded with hoses, 4 x 2 5000 PSI Choke Manifold Water Tank: 500 Bbl Fuel Tank: 10000 gallon Hyd. Hoists: 2 - Braden PD12C Air Hoist: Ingersoll Rand HU-40 Pipe Spinner: Hawk 550-H Wireline Machine: Five Star retriever Drill Pipe 12,000’ of 4-1/2” 16.60 S-135 and Drill Collars 16 - 6-1/2” Slick with 3 ea 8" slick Tesco 250HD Top Drive. THE LAST 2 RIGS THAT WE SOLD WENT TO WORK 5 DAYS AFTER RECEIPT OF PAYMENT SOLD AS IS WHERE IS, SUBJECT TO PRIOR SALE, SUBJECT TO COMPONENT SUBSTITUTION 4 AVAILABLE ...
Location: Date Posted: Thursday, January 21, 2016
Condition: USED WORKING RIGS READY TO GO Price: POR
view details
For Sale: PZ-9 UNITIZED 1000HP GARDNER DENVER MUD PUMP
GOOD RUNNER JUST OFF RIG REPLACED WITH 1600 HP PUMPS. ...
Location: Oklahoma Date Posted: Thursday, January 21, 2016
Condition: GOOD CONDITION READY TO WORK Price: 65000
view details
For Sale: PZ-9 GARDNER DENVER
REBUILT PZ-9 MUD PUMP 1000 HP PUMP REBUILT AND READY TO RUN. GREAT SWING PUMP...
Location: Oklahoma Date Posted: Thursday, January 21, 2016
Condition: REBUILT Price: 55000
view details
For Sale: MI SWACO MONGOOSE DUAL SHAKER
UNUSED DUAL SHAKER WITH LIFTING SKID, READY TO WORK...
Location: HOUSTON Date Posted: Tuesday, September 08, 2015
Condition: SURPLUS UNUSED Price: 25000
view details
For Sale: MI SWACO UNITIZED SHAKER WITH MUD CLEANERS
UNITIZED MUD CLEANING SYSTEM WITH LIFTING SKID. 3 3 MONGOOSE SHAKERS, 2 CONE DESANDER, 16 CONE DESILTER. READY TO GO TO WORK...
Location: HOUSTON Date Posted: Tuesday, September 08, 2015
Condition: SURPLUS UNUSED Price: $65,000.00
view details
For Sale: NOV KING COBRA UNTIZED MUD CLEANER SYSTEM
NEW UNUSED MUD CLEANER COMPLETE. THREE KING COBRA SHAKERS, 2 CONE DESANDER, 16 CONE DESILTER. WITH LIFTING SKID. COMPLETE READY TO GO....
Location: HOUSTON Date Posted: Tuesday, September 08, 2015
Condition: SURPLUS UNUSED Price: $65,000.00
view details
For Sale: 1500 HP JOY STICK TOP DRIVE DRILLING RIG
DRAWWORKS Ingersoll- Rand (IRI) 1500 series trailer mounted rig with IRI 2550 mechanical drawworks (rated 1500 HP) with disc brakes and Eaton friction brake. ROTARY TABLE A CE 27 1/2” rotary, independently driven by one (1) EMD D79, 800 HP DC motor. ENGINES AND GENERATORS Two (2) Cat D3512-B diesel engines, each rated at 1476 HP, unitized with Kato 1205 KW generators supplying AC power to SCR house powering mud pumps, rotary table, and auxiliary equipment. Two (2) Cat 3412E DITA electronic controlled diesel engines rated at 750 HP each at 2100 rpm with Allison Model S6600 transmissions, complete with hydraulic controls, powering the 1500 HP drawworks. 4456 Total Horsepower. OVERHEAD STRING A 350 Ton, 5 sheave, traveling block and one 350 Ton hook with a Varco TDS-11SA 500 ton top drive with rotating mousehole. A 1-1/4” drilling line, 10 line string up. MAST IRI 136’ mast with 700,000# hookload. Mast has capability to accommodate a 700 HP Top Drive. SUBSTRUCTURE IRI 22’ telescoping substructure rated at 700,000# rotary load with 400,000# simultaneous setback. Rig floor and substructure incorporate drainage system to provide maximum fluid containment. DRILLER CONTROLS M/D Totco V-ICIS ED integrated control and monitoring driller station. Positioned in a climate controlled drillers cabin, the ergonomically designed system incorporates controls for the drawworks, rotary and mud pumps with rig information systems and control touch screens. A single joystick controls the disc and Eaton brakes, drawworks clutch and engine throttles as required for hoisting and lowering. M/D Totco Electronic Driller and Block Control enables near steady state WOB while drilling and block speed controls to minimize surge and swab pressures. MUD SYSTEM (Patented by in 1998) 735 Bbls. total capacity active with slug tank. Consisting of covered cylindrical tanks incorporating spherical bottoms and electrical agitators for optimum mixing/blending and ease of clean out. All process tanks are unitized on a common skid with (2) 8 x 6 x 75 Hp centrifugal pumps, a vacuum degasser and one 16 cone desilter (960 GPM). The slug, mixing and blending tanks are on one common skid with (2) 8 x 6 x 75 Hp centrifugal pumps and hopper (dust collector included). Each triplex pump is unitized with a suction tank and dedicated 8 x 6 x 60 Hp charging pump for maximum efficiency. Two (2) Brandt/Rig Tech model LPC-40 shale shakers are unitized on a swing up shaker deck (with space to accommodate a third shaker). Additionally, a separate skid incorporates (2) each 51 Bbl. trip tanks with two 4 x 3 x 30 Hp centrifugal pumps. MUD PUMPS Two (2) GD PZ 11 triplex pumps (rated 1600 HP each), each belt driven by one (1) GE 752 High-Torque DC motor rated at 1150 HP. Each pump is unitized with flow through pulsation dampener on both suction and discharge. AUXILIARY EQUIPMENT A Varco 6800 hydraulic Kelly Spinner, Spinmaster hydraulic pipe spinner, Crown-O-Matic, Mathey slickline unit with 16,000’ of 0.105 slickline, 18” high catwalk and pipe racks and motorized drill line spool. LAST DRILLED 2013 SOLD AS IS WHERE IS SUBJECT TO PRIOR SALE SUBJECT TO SUBSTITUTION OF COMPNENTS...
Location: TEXAS Date Posted: Tuesday, August 25, 2015
Condition: USED COMPLETE RIG Price: POR
view details
For Sale: CARDWELL KM250 DRILLING RIG
KM 250 DRIVE IN DRILLING RIG, RUNS AND DRIVES. Draw Works KM 210 DD Draw Works. 8 V 92 Runner. 250 T Drilling Block. Backyard not included in pricing. We can price it out if desired....
Location: Our Yard Houston, Texas Date Posted: Thursday, July 09, 2015
Condition: Working in Field Price: $165,000
view details
For Sale: National 1320-UE drawworks (rated at 2000 HP)
DRAWWORKS A National 1320-UE drawworks (rated at 2000 HP) powered by two GE electric motors with a Baylor 7020 electric brake, B-1 catheads. A National C-275 27-1/2” rotary table with 2 speed independent electric drive. ENGINE AND GENERATORS Three Caterpillar 3512 diesel engines driving three KATO 1050 KW generators. A Ross-Hill SCR system. MUD PUMPS Two Gardner Denver PZ-11 triplex pumps (each rated at 1600 HP) each driven by Two GE-752 electric motors. Each with a K20-500 Hydril pulsation dampeners and 8 x 6 centrifugal charging pumps with suction dampners. OVERHEAD STRING A Dreco crown, one Oilwell B-500 ton block. MAST Dreco 142’ mast with 32’ high floor, rated at 1,300,000# static hook load (mud drainage system built into rig floor). Mast has been modified for Top Drive. MUD SYSTEM One shaker tank (282 bbls), one intermediate tank (244 bbls), one suction tank (488 bbls),one reserve tank (366 bbls) Total Capacity = 1380 BBLS ,13 Brandt mud agitators, three Brandt King Cobra shale shakers, one 3 cone 10” desander, one 18 cone 4” desilter, on Swaco vacuum degasser. A 100 bbl trip tank with two 3 x 2 centrifugal pumps. AUXILIARY EQUIPMENT Fluorescent and mercury vapor lights, fuel filter system, Mathey wireline unit, drilling recorder, two 499 bbl water tank, and one 471 bbl fuel tank. Rig Stacked: 4 February 2009 ...
Location: TEXAS Date Posted: Tuesday, June 09, 2015
Condition: USED Price: POR
view details
For Sale: BOWEN POWER SWIVEL
UNIT IS ON LOCATION WORKING ON RENTAL, TIME TO SELL BOWEN 1.5 WITH DETROIT POWER ON SKID...
Location: TEXAS Date Posted: Tuesday, June 09, 2015
Condition: USED WORKING RIGS Price: 75000
view details
For Sale: Crown750SD 750 HP TOP DRIVE DRILLING RIG
JUST OFF CONTRACTS MAR 2015 MANUFACTURED IN 2003 Crown CC750SD 750 HP WITH TOP DRIVE Powered by (2) Caterpillar C-18’s with Allison transmissions w/ Eaton 424WCBD AUX BRAKE Crown telescoping Mast, 118’ 300,000 LB SHL on 8 lines with Crown telescoping Substructure w/15’ floor height, Ideco UTB-160 Block Hook, Hacker 20.5” Rotary table Complete Generator House w/2 - Caterpillar C-15 / Caterpillar generators 455kW/ / air compressors and complete motor control center Mud Pumps 2- F-1000 (CH) 1000 HP Each powered by Caterpillar 3508B 2 tank, 1000 Bbl Mud System w/ 100 Bbl pre-mix included with pit roofs w/ 2 shakers, Desander and desilter Well Control, 11 inch 5000 psi Double BOP w 11 inch 5000 psi annular, 5 Station 100 gallon Closing Unit Skidded with hoses, 4 x 2 5000 PSI Choke Manifold Water Tank: 500 Bbl Fuel Tank: 10000 gallon Hyd. Hoists: 2 - Braden PD12C Air Hoist: Ingersoll Rand HU-40 Pipe Spinner: Hawk 550-H Wireline Machine: Five Star retriever Drill Pipe 12,000’ of 4-1/2” 16.60 S-135 and Drill Collars 16 - 6-1/2” Slick with 3 ea 8" slick Tesco 250HD Top Drive. THE LAST 2 RIGS THAT WE SOLD WENT TO WORK 5 DAYS AFTER RECEIPT OF PAYMENT SOLD AS IS WHERE IS, SUBJECT TO PRIOR SALE, SUBJECT TO COMPONENT SUBSTITUTION THIS RIG AND MANY OTHERS AVAILABLE FOR LEASE AND FINANCING ...
Location: OKC Date Posted: Tuesday, June 09, 2015
Condition: JUST OFF CONTRACT Price: POR
view details
For Sale: WILSON MOGUL 5 AXLE WELL SERVICE RIG
THIS RIG JUST COMPLETED A CONTRACT AND IS READY TO GO BACK TO WORK. GOOD WORKING RIG JUST OFF WELL. INCLUDES, TUBING BLOCK (NO EXTRA CHARGE) HYDRAULIC TUBING TONGS, ROD ELEVATORS, TUBING ELEVATORS, ELEVATOR LINKS, TUBING SPIDER, ROD HOOK 8V92 WITH ALLISON TRANSMISSION, 96 FT 200000 # MAST WITH HYDROMATIC - THIS RIG AND MANY OTHERS AVAILABLE FOR LEASE/RENTAL AND OR FINANCING...
Location: TEXAS Date Posted: Tuesday, June 09, 2015
Condition: GOOD WORKING RIG Price: 250000
view details
For Sale: CABOT 900 CARRIER RIG
DRAWWORKS Cabot 900 series mobile rig with Cabot 2346 drawworks (rated 950 HP) with a Parmac V-80 hydromatic brake. Drawworks is driven by two Caterpillar 3408 DITA diesel engines (500 HP each) through Allison CLT 5860-3 transmissions. ROTARY An Ideco 17-1/2” rotary table. ENGINES AND GENERATORS Two Caterpillar D379 diesel engines each driving 450 KW AC generators. MUD PUMPS Two Gardner Denver PZ-9, 1000 HP triplex pumps - each driven by a Caterpillar D-398 diesel engine (rated 825 HP each). OVERHEAD STRING A Cabot crown block and Ideco 150 Ton block/hook combination. Oilwell PC-225 swivel. A 1-1/8” 8 line string up. MAST Cabot 117’ mast rated at 350,000# hook load capacity with 17’ telescoping structure rated to 350,000 lbs. rotary capacity with 200,000# simultaneous setback capacity. Overall clear height under rotary beams is 13’6”. BLOWOUT PREVENTER EQUIPMENT One 11” 5,000 psi Cameron double Type U and one 11” 5,000 psi annular preventer. A Koomey, Type 80 4 station control system with remote on rig floor and 4” x 3”, 5,000 psi choke manifold. MUD SYSTEM Two steel mud tanks with 400 bbl. total capacity, Brandt model SRS-2 (2 cone) desander, Brandt model SE-16, (16 cone desilter). Two (2) Swaco shale shakers. One (1) 75 barrel trip tank (square tank). Mud system has round tanks with flat bottoms. DRILL PIPE AND DRILL COLLARS 8900’ (285 joints) of 4 1/2”, 16.60 ppf, Grades S-135 drill pipe. 12 joints of 4-1/2” HWDP, (3) 8” drill collars and (15) 6-¼” drill collars. AUXILIARY EQUIPMENT Kelly Spinner, pipe spinner, Electric over hydraulic wire line unit with 11,000’ of wire line. MD Totco electronic drilling recorder. LAST RAN 2 YEARS PREVIOUS. THIS RIG IS PACKED WITH TOOLS, AND SPARE PARTS. A LITTLE RIG UP AND IT WILL BE A GREAT WORK HORSE. SOLD AS IS WHERE IS SUBJECT TO PRIOR SALE THIS RIG AND MANY OTHERS AVAILABLE FOR LEASE/RENTAL AND OR FINANCING ...
Location: Date Posted: Tuesday, June 09, 2015
Condition: USED RUNNER Price: POR
view details
For Sale: COOPER 5 AXLE WELL SERVICING RIG
GOOD WORKING RIG JUST OFF WELL. INCLUDES, BLOCK (NO EXTRA CHARGE) HYDRAULIC TUBING TONGS, ROD ELEVATORS, TUBING ELEVATORS, ELEVATOR LINKS, TUBING SPIDER, ROD HOOK 8V92 WITH ALLISON TRANSMISSION, 96 FT 200000 # MAST WITH HYDRAMATIC THIS RIG AND MANY OTHERS AVAILABLE FOR LEASE/RENTAL AND OR FINANCING...
Location: TEXAS Date Posted: Tuesday, June 09, 2015
Condition: GOOD WORKING RIG Price: 250000
view details
For Sale: WELL SERVICE PUMP GARDNER DENVER TEE
GOOD RUNNING GARDNER DENVER TEE WITH DETROIT V-6-71 ROD OILLER AND TANKS...
Location: TEXAS Date Posted: Tuesday, June 09, 2015
Condition: USED RUNNER Price: 80000
view details
For Sale: 2006 TAYLOR C1000 CARRIER 1000HP DRILLING RIG
TAYLOR C1000 rated at 1000 hp. ENGINES - 2 Cat C-15 500 HP EACH DERRICK - Pemco Derrick - Mast height - 120 FT 400,000 LB CAPACITY Racking board height 58 ft 11in. from floor RACKING BOARD CAPACITY 12000 FT 4 1/2 IN DRILL PIPE SUBSTRUCTURE - HEIGHT 18 FT X 17 FT WIDE X 30 FT LONG 400,000 LB CAPACITY ROTARY BEAM CLEARANCE 11 FT BLOCK HOOK - AMERICAN BLOCK 225 TON 4 SHEAVE CARRIER 8 AXLE WITH ABS BREAKING WATER TANK WITH PUMPS AND self ELEVATING TOP DOG HOUSE 2 PIECE MUD BOAT ...
Location: TEXAS Date Posted: Tuesday, June 09, 2015
Condition: USED GOOD RUNNER Price: POR
view details
For Sale: 1200 HP CABOT MOBILE RIG
10,000'-13,500' NOMINAL DEPTH RANGE, 4V2" D.P., TRIPLES 1200 HORSEPOWER The 1200 Series Drilling Rig brings to the drilling industry a proven concept of mobility and faster , simpler rig-up and rig-down. The 1200 horsepower Model 2550 drawworks and the 127' 715,000# APl-rated mast are sized for dependable drilling operations in this medium depth range. The basic rig components move in five loads. The loads include the 1200 horsepower trailer­ mounted 2550 drawworks with power and rotary drive; the telescoping mast carried on its own demountable bogie, complete with traveling block strung up and reserve line spool carried in the mast; a two-load substructure with BOP and closing unit storage facilities ; rig base skid , and mast erection hydraulic power unit, along with stairs, and pipe slide . These five components combine with independently powered mud pumps and steel mud tanks resulting in a flexible, fast-moving rig. Rig features include: POWER -Two engines CAT 3412 totaling up to 1300 horsepower at 2100 RPM. Provides ample power for hoisting and rotating operations with either or both engines driving. Engines are tandem-mounted and totally clear all around for easy access and maintenance. TORQUE CONVERTERS- Single-stage torque converters sized to match the engines selected. Proven lockup feature in each converter provides highly efficient power transmission without normal torque converter efficiency losses after loads have been accelerated . TRANSMISSIONS-Allison CLT 6061,mounted in combination with converters. Five forward speeds and one reverse speed allow full output horsepower to be utilized over an unusually wide range of speeds and loads. The driller can instantly select the proper ratio in any operation with the full torque shifting capability of the synchronized transmissions COMPOUND- Integral with final drum drive . Idler adjusted high-speed roller chain in oil bath case compound ing each engine drive to drawworks drum shaft . DRAWWORKS- Model 2550. 25'" diameter x 50" long drum barrel to match drawworks for triples mast operation. 50" diameter x 12" wide circulating water cooled brakes ; full wrap, single point adjusted, fully equalized brake bands. Outboard drum clutch providing 75,000# single line pull. Single Parmac VBO brake assist driven through overrunning coupling . CATWORKS-Hydraulic catworks including high capacity breakout cylinder, long stroke spinning and make-up cylinder and planetary gear, self-locking handling winch for smoother , safer catheading operations . DRAWWORKS DRIVE-Heavy -duty propeller shaft drive through two Model 600 right-angle gear boxes and compounding chains to drawworks drum shaft . Allows individual power transmission from either engine to drum shaft or rotary drive . ROTARY DRIVE-Propeller shaft via full air rotary clutch, heavy-duty reverse gear box and oil bath roller chain elevated rotary drive, unitized and swing-mounted for roading clearance. Simple propeller shaft connections at rig up. Nominal max. rotary table speed- 300 RPM. Nominal table working torque- 30,000 ft . lbs. MAST-127' 715,000# APl-rated vertical freestanding telescoping mast. Mast remains strung up when telescoped and moves as self­ contained trailer package on demountable three-axle bogie. Unique design provides load transfer down each mast leg with no eccentricity or offsets. Mast is extended and telescoped with trailer tractor. Raised in extended length with dual hydraulic rams for greater reliability and control. Mast designed with internal clearance to handle up to six sheave 42" traveling block running flat to board. Square tubular construction . Racking board with adjustable platform and side­ mounted fingers provided with safety locks. Fast line anti-whip guide installed in folding frame . (See p. 20 for details.) SUBSTRUCTURE-17' floor height (optional 22 ') cross-type substructure consisting of hydraulic telescoping single­ piece main substructure and setback floor with setback base. Includes rig base pinned to main structure and truss diagonals to provide wide base and trackage for spotting mast on substructure. Ample well head clearance in all directions for large BOP equipment. HYDRAULIC POWER -Dual power source 35 GPM 2500 psi max pressure system . Self contained skid package with diesel engine and electric motor each driving a pump, reservoir and controls. Allows either power system to provide power for raising substructure, manipu­ lating, positioning and raising mast, operating reserve line spool, powering hydraulic catworks and other hydraulic functions as required. Each power source serves as back-up. POWER RESERVE SPOOL- For reserve line storage and storage of displaced line when mast is telescoped. Carried in mast during moves . RIG TRAILER-Combination machinery bed and gooseneck trailer with 60,000# capacity triple axle bogie. Carries drawworks , power and rotary drive. Package includes the following used equipment: 1. 1200 HP trailer mounted 2550 drawworks with 2 each CAT 3412 engines and torque convertors/transmissions 2. 127’ 715,000# hook load mast with trailer dolly and 350T Block Hook Combo and 350T Swivel 3. 17’ Hydraulically scoped substructure w/mud boat and Hydraulic Raising Cylinders, w/ air hoists V-door and catwalk 4. Power Reserve Spool 5. Hydraulic Power Skid Detroit 6. Top Dog House with Substructure 7. Accumulator 6 Station skidded with Dog House Remote 8. Stand Pipe, manifold and Choke Manifold w/ Choke Kill Hose and “Poor Boy” type degasser 9. Solids Controls (2 shakers, desander, desilter and vacuum degasser) 10. Mud Pits with Trip tank, pumps and agitators 1000 BBL nominal 11. 2 each 1000 HP F-1000 Mud Pumps with 3508 CAT Power Unitized Complete 12. Open top water tank 13. Change House 14. Parts House 15. Generator House with Motor Control Center and 2 each CAT 400 KW Gen sets 16. 2 Air compressors, 1 cold start 17. Junk Box 18. Fuel Tank with Lubber Station 19. Suit cases 20. BJ Manual Tongs 21. American Made 27.5 Rotary Table with master bushings and slips 22. Kelly Spinner RIGS SOLD AS IS WHERE IS SUBJECT TO PRIOR SALE COMPONENTS SUBJECT TO SUBSTITUTION . ...
Location: TEXAS Date Posted: Monday, June 08, 2015
Condition: USED GOOD Price: POR
view details
For Sale: Well Service Tank
TANK WAS CLEANED AND PAINTED. SEVERAL VALVES WERE REPLACED. WEIR OPERATION WAS IMPROVED. The tank dimensions are 46"h x 7'6"w x 35'L 240 BBL The transport dimensions are 54"h x 8'6"w x 40'6"L 2 AVAILABLE ...
Location: HOUSTON Date Posted: Monday, June 08, 2015
Condition: Good Price: POR
view details
For Sale: 500 KW GENERATOR HOUSE
USED RUNNER CAT SR4 500 & 455 KW 480V POWERED BY CAT 3412'S 2500 HOURS, ELECTRIC START. 10 FT X 8 FT CONTROL ROOM WITH 75 KVA TRANSFORMER, CUTLER HAMMER PANEL AND MOTOR CONTROL/STARTERS. OVER ALL SKID 10 X 40 FT. CURRENTLY LOCATED IN DENTON TEXAS, MOVING TO MY YARD IN HOUSTON ON 6-15-15. SOLD AS IS WHERE IS SUBJECT TO PRIOR SALE...
Location: TEXAS Date Posted: Sunday, June 07, 2015
Condition: USED Price: POR
view details
For Sale: MAC 400 9500 FT RIG
NUMEROUS SPARE PARTS AND TOOLS NOT SHOWN ON INVENTORY. SOLD AS IS WHERE IS, SUBJECT TO PRIOR SALE, SUBJECT TO SUBSTITUTION OF COMPONENTS. DRAWWORKS Mac 400 POWER: 2 - 60 Series Detroit Engines 375 HP #1 PUMP Emsco G700 Powered by: 60 Series Detroit MAST Al Hicks 12' x 101' 340,000# SHL SUBSTRUCTURE 13' x 17' x 42' Box Type TRAVELING Block: Ideco Shorty 150T Block & Hook EQUIPMENT Swivel: 125T Gardner Denver Swivel ROTARY TABLE Gardner Denver 17.5" x 44" GENERATORS (2) 205KW Cat Powered By 3406 Cat Closing Unit: 3 Station Koomey Closing Unit, 3000# Choke Manifold, DRILL PIPE 7,936' (256 jts) 4 1/2" grade G Drill Pipe 19.90 lb w/ 4.5" XH tool joint DRILL COLLARS (18) 6" x 31' Drill Collars W/ N.C.44 Connections MUD SYSTEM Working Pits: 2 - steel pits 425 bbl. Premix Pit: 70 bbl. Mixing pit Mud mixing pump: Continental Emsco DC-700 SOLIDS CONTROL Shale Shaker: Vortex linear motion shaker EQUIPMENT Desander: 2 cone AUXILIARY Water tank: 425 bbl. tank EQUIPMENT Fuel tank: 8' Dia X 21' L Survey Instrument: Bemco Hyd. Wireline measuring unit ...
Location: Date Posted: Tuesday, April 21, 2015
Condition: USED Price: POR
view details
For Sale: U-15 DRILLING RIG FOR SALE 900 HP 1200 FT RATING
COMPLETE READY TO GO TO WORK, NUMEROUS SPARE PARTS AND TOOLS NOT SHOWN ON INVENTORY. SOLD AS IS WHERE IS, SUBJECT TO PRIOR SALE, SUBJECT TO SUBSTITUTION OF COMPONENTS. DRAWWORKS Unit Big Shaft U-15 900HP Auxiliary brake: Hydromatic Parmac 22SR POWER: 2-Caterpillar D353TA 910 HP #1 PUMP Ellis Williams 15W600 600 HP Duplex Powered by: Compound driven #2 PUMP Continental Emsco DB-700 700 HP Duplex Powered by: Caterpillar D379TA MAST 131' Lee C. Moore; 366,700# hook load on eight lines SUBSTRUCTURE 44' x 21 1/2' x 14 1/2'; 16.5' GL to KB TRAVELING Block: Ideco shorty 265 ton, 1 1/8" drilling line EQUIPMENT Hook: Ideco shorty Swivel: Brewster 6-SX ROTARY TABLE Ideco 205B 20 1/2" opening GENERATORS 1-Caterpillar SR4 275 KW generator wired 480 volts powered by Caterpillar D-3408 1-Caterpillar SR4 240 KW generator wired 480 volts powered by Caterpillar D-3406 Closing Unit: 4 station 110 gallon accumulator DRILL PIPE 4 1/2" 16.60# XH DRILL COLLARS 8" and 6 1/4" (nominal sizes) MUD SYSTEM Working Pits: Shale: 45' x 8' x 7 1/2'; Suction: 45' x 8' x 7 1/2', 960 bbls Premix: 17' x 10' x 5'; 150 bbl Mud mixing pump: # 2 pump and Mission 5 x 6 50 HP centrifugal pump SOLIDS Shale Shaker: Derrick Flow Line Linear CONTROL EQUIPMENT AUXILIARY Water tank: 500 bbls EQUIPMENT Fuel tank: 4,000 gals. Mud house: 45' x 7 1/2' x 8' Penetration recorder: electronic Survey Instrument: 7 degree with wireline unit Water Pump: 4" x 6" duplex ...
Location: Date Posted: Tuesday, April 21, 2015
Condition: USED COMPLETE RIG Price: POR
view details
For Sale: GARDNER DENVER 500
NUMEROUS SPARE PARTS AND TOOLS NOT SHOWN ON INVENTORY. SOLD AS IS WHERE IS, SUBJECT TO PRIOR SALE, SUBJECT TO SUBSTITUTION OF COMPONENTS. NO PUMPS WE HAVE SEVERAL SETS AVAILABLE. DRAWWORKS Gardner Denver 500 Powered by: 0 Auxiliary Brake: Hydromatic Parmac V-80 POWER 2 Caterpillar D353TA 910HP Engines MAST 131' Lee C. Moore 375,000# HL 8 lines 0 0 0 SUBSTRUCTURE 48' x 25' x 9'; 13' GL to KB TRAVELING Block: Brewster 5 sheaves 250 ton Combination 1 1/8" drilling line EQUIPMENT 0 0 Swivel: Skytio 75X 0 ROTARY TABLE Ideco 2350 23 1/2" Opening GENERATORS 1 Caterpillar SR4 100 KW; 1 Caterpillar SR4 180 KW Powered by: 2 Caterpillar D3306 Engines 0 BOP EQUIPMENT Ram Preventor: 11" 3,000 psi Shaffer LWS Double Ram Annular Preventor: 11" 3,000 psi Hydril GK Closing Unit: 5 station 180 gallons DRILL PIPE 4 1/2" E 16.6 XH DRILL COLLARS (5) 8" and (25) 6 1/2" 0 MUD SYSTEM Working Pits: Shale: 45' x 8' x 4' Suction: 45' x 8' x 4'; 500 bbl Premix Pit: 80 bbl Mud Mixing Pump: 0 5" x 6" Powered by: 50 HP Centrifugal 0 SOLIDS CONTROL Shale Shaker: Single Screen EQUIPMENT 0 0 AUXILIARY Water Tank: 500 bbl EQUIPMENT Fuel Tank: 6,000 gallons Powered by: 0 Penetration Recorder: 2 pen Drillograph Survey Instrument: Sure Shot A-1 with wireline unit Mud House: 40' x 8' x 8' Water Pump: 4" x 6" Duplex Auxiliary Mud Storage: 0 ...
Location: Date Posted: Tuesday, April 21, 2015
Condition: USED COMPLETE RIG Price: POR
view details
For Sale: 250 BBL Hydrator
THESE ARE NEW UNITS AVAILABLE FOR SHIPMENT NOW 1.0 General Unit Specification This technical specification covers the construction and design requirements for a 250 BBL Trailer-Mounted Hydrator unit capable of delivering homogeneous liquids required for oilfield fracturing and stimulation services in ambient conditions of 24 degrees F minus 4.5 degrees C to 120 degrees F 49 degrees C The unit will be equipped to draw in and mix fracturing water and liquid chemical products to the process liquids through a well-designed and maintainable fluid handling system. Manual and automated controls will be installed on the unit to allow complete operator control and customized programming for job specific applications and treatment plans. 1.1 Unit Dimensions & Permitting The unit dimensions(excluding the customer supplied tractor will be approximately Length: 48’ 0” 14 meters Width: 8’ 6” 2.6 meters Height: 13 6” 4.1 meters Weight empty 70000lbs 31750 kgs estimated The unit/tractor combination will comply with all US & TX DOT regulations for unit dimensions, but could exceed the standard 80,000lbs vehicular weight allowed depending on customer tractor selection. Axle loading will be properly distributed to allow overweight/oversize permitting in the continental United States and compliance with US Federal Bridge Law. 2.0 Equipment Systems 2.1 Trailer Specifications The trailer will be a heavy duty, mobile, multi-purpose platform that will include the following features and compliances: US and TX DOT Compliant for On-Road Transportation A36 Steel Beam/Frame Construction (at minimum) w/ frame members Heavy duty 2” King Pin with 3/8” Bolster Plate mounted to receive a fifth-wheel Standard tractor air “glad-hands” and electrical connectors accessible at the front of trailer Sealed electrical wiring and protected air-lines Dual Axle w/ 25,000lb rated axles and 50,000lb rated Monopivot Air-Ride Suspension 16 1/2” x 7” S Cam Brakes w/ ABS system installed on both axles Eight 11R22.5 Tires Eight 8.25 x 22.5, 10-Hole, Hub Piloted Wheels Four hydraulic stabilizing cylinders with landing feet Holland Mark V Heavy Duty Landing Gear, manual 2-speed gearbox crank DOT compliant vehicle lighting and conspicuity marking Heavy duty Rubber Mud-Flaps installed on rear axle Steel Fenders 2.2 Power Unit 2.2.1 Hydraulic Drive Engine To supply hydraulic power requirements, installed on the trailer front deck area will be one (1) 580HP Caterpillar C-15 Diesel Engine. It will be supplied in a standard configuration to allow ease of access to oil-fill ports, filters, and service points. The engine will be accessorized and installed to drive the hydraulic power system as follows: 24 VDC ECM and electronics 24 VDC Alternator SAE Flywheel housing w/ clutch drive 24 VDC Starter Spin-on Fuel Filtration System Spin-on Water Filtration System Spin-on Lube Oil Filtration System Safety derates included in Engine Calibration Heavy duty air cleaner pair w/ high filtration pre-cleaners and restriction indicator Carbon steel muffler w/ spark arrestor and carbon steel rain cap Heavy duty muffler brackets suitable for rough terrain Stainless steel flex connector from turbo exhaust connection to muffler intake Durst Style or Equivalent Pump Drive installed directly to the flywheel housing Vertically mounted Radiator/Cooling Assembly (120F) with sections for the following: Engine Jacket Water System (Air to Water) Hydraulic Cooler Core (Air to Oil) Fuel Cooler Core (Air to Fuel) 2.2.2 Fuel System This unit will be equipped with a diesel fuel storage and distribution system with the following specifications: One 200 Gallon Fuel Tank configured as follows: Aluminum construction Cylindrical build w/ capped ends Inline fuel heater for cold weather operations 2” Drain valve on the tank Tank breather fitting Filtration screen installed in fill neck Fuel level sender unit Tank fill neck accessible from the ground for filling on road-side Tanks “soft” mounted to unit via rubber lined straps and cradles 2.2.3 Hydraulics System Hydraulic power will be installed on this unit with circuits to drive the following items: One closed loop circuit to power the unit suction pump Five hydraulic powered mixing agitators in the main tank Two Liquid chemical metering pumps for gel Two Chemical tote agitators Four unit stabilizer / level control cylinders Three hydraulically controlled Weir gates in main tank Hydraulic Oil cooling loop Hydraulically Driven Process Valve Actuators as needed Features of the hydraulic system to include: Pressure compensated piston hydraulic pump technology Hydraulic valve stack(s) to control hydraulic flow to open loop components Common hydraulic reservoir equipped as follows: Steel construction Internal baffling to stabilize hydraulic fluid returns and suctions Removable suction strainer assemblies Tank mounted filters and common inlet/outlet manifolds Heat exchanger for cold weather service – Optional Equipment Level gauge visible from the side of the unit Oil temperature sensor Filtered fill port Filtered breather cap Clean out covers/man way access All hosing, fittings, and tubing necessary to complete the system. All standard cleanliness and “pigging” procedures will be followed in hose construction and installation. 2.3 Fluid Handling System 2.3.1 Discharge Piping & Manifold The discharge manifold will be installed on the road-side of the unit. The discharge manifold will be connected to the main tank outlet and flow to the manifold will be controlled via a hydraulic actuated butterfly valve. The discharge manifold shall be constructed with twelve (12) 4 inch Fig 206 union, thread half connections. Each Fig 206 union will be equipped with a 4” butterfly valve and cap with chain. 2.3.2 Suction Pump Installed on the curb-side of the unit will be a hydraulically driven suction centrifugal pump. 2.3.3 Suction Piping & Manifold Installed on the curb-side of the unit shall be an integrated manifold assembly consisting of the low pressure inlet piping, centrifugal pump, and discharge piping to the main hydration tank. The inlet piping shall consist of twelve (12) 4 inch Fig 206 union, wing half connections. Each union connection shall include a 4” butterfly valve. The centrifugal pump shall be installed at the outlet of the suction manifold. The pump discharge piping includes a Turbine flow meter and a magnetic flow meter for accurate measurement of flow rate. After the flow meters, the pump discharge piping runs to the main hydration tank inlet. All piping shall be constructed with appropriate Victaulic and flanged connections to facilitate removal for service. 2.4 Hydration / Liquid Additive Tanks and Systems 2.4.1 Main Tank The following documentation will be provided with each unit: One electronic copy on CD of the Unit Operations and Service Manual One hard copy of the Unit Operations and Service Manual ...
Location: Houston Date Posted: Tuesday, April 21, 2015
Condition: New Price: Upon Request
view details
For Sale: 2500 HP FRAC PUMP TRAILER
NEW READY TO SHIP NOW 2500 HP Frac Pump Unit w/ 3512C Diesel Engine 1.0 General Unit Specification This technical specification covers the construction and design requirements for a 2500 HP Trailer-Mounted Frac Pumping unit capable of performing general pressure pumping well service operations in ambient conditions of -40°F (-40°C) to 120 °F (49 °C) with optional cold weather assistance gear installed. All specifications as listed in this revision are subject to change or clarification as required by the manufacturer or as requested by the customer. 1.1 Unit Operational Limits The unit as specified with Gardner Denver 2500Q pumps will be capable of pumping the following pressures and rates: Maximum working pressure: 12,400 PSI Maximum working rate: 21.6 BPM 1.2 Unit Dimensions & Permitting The unit dimensions (excluding the customer supplied tractor) will be within: Length: 44’-8” (13.6 meters) Width: 8’-6” (2.6 meters) Height: 13’-2” (4.0 meters) Weight: 75,000 lbs (34,000 kgs) The unit/tractor combination will comply with all US & TX DOT regulations for unit dimensions, but due to the robust design of the unit, will exceed the standard 80,000 lbs vehicular weight allowed when combined with the customer supplied tractor. Axle loading will be properly distributed to allow overweight/oversize permitting in the continental United States (should it be necessary) and compliance with US Federal Bridge Law. The unit systems are detailed as follows: 2.0 Equipment Systems 2.1 Trailer Specifications The trailer will be a heavy duty, mobile, multi-purpose platform that will include the following features and compliances: Single drop trailer frame US and TX DOT Compliant for On-Road Transportation A36 Steel Beam/Frame Construction (at minimum) w/ frame members built on 35” centers Heavy duty 2” King Pin with 3/8” Bolster Plate mounted to receive a 52” tall fifth-wheel hitch Standard tractor air “glad-hands” and electrical connectors accessible at the front of trailer Sealed electrical wiring and protected air-lines DOT certified brake airlines Three Axle spread w/ 25,000 lb rated axles and 25,000 lb rated Monopivot Air-Ride Suspensions 16 ½” x 7” S Cam Brakes w/ ABS system installed on rear axle Twelve (12) 11R22.5 Tires Twelve (12) 8.25 x 22.5, 10-Hole, Hub Piloted Aluminum Wheels Holland Mark V Heavy Duty Landing Gear, manual 2-speed gearbox crank DOT compliant vehicle lighting and conspicuity marking Heavy duty Rubber Mud-Flaps installed on rear axle spread Heavy Duty diamond tread plate steel fenders No-slip fiberglass gating work platform on back of trailer frame 2.2 Power Units/Drivetrains 2.2.1 Primary Drive Engine Installed on the trailer frame will be one (1) 3512C Caterpillar Tier 2 Diesel Engine rated at 2500 BHP @ 1900 RPM. It will be mounted to allow ease of access to oil-fill ports, filters, and service points. This engine will be accessorized and installed to drive the down-hole pumping process as follows: 24 VDC ECM and electronics 24 VDC 75 Amp Alternator SAE 0 Flywheel housing Hydraulic Starter powered by customer supplied tractor mounted wet-kit Spin-on Fuel Filtration System Spin-on Water Filtration System Spin-on Lube Oil Filtration System CAT standard safety derates included in Engine Calibration Heavy duty air cleaner assembly Dual carbon steel mufflers and carbon steel rain caps Heavy duty muffler brackets suitable for rough terrain Stainless steel flex connector from turbo exhaust connection to muffler intake Integral shell and tube transmission cooler tied into Jacket Water system TH55-E70 Caterpillar Transmission mounted to flywheel housing with the following gear ratios: 1st Gear - 6.25 : 1 2nd Gear - 4.59 : 1 3rd Gear - 3.38 : 1 4th Gear - 2.48 : 1 5th Gear - 1.83 : 1 6th Gear - 1.36 : 1 7th Gear- 1.00 : 1 Reverse - (Blocked) Spin-on Transmission Oil Filtration System Heavy duty GWB 390.65 output connection Output brake option built into transmission “Wishbone” style transmission cradle mount for proper weight distribution One-piece heavy duty GWB-type driveshaft assembly with cover and steel guard rings Horizontal 3-point mount Radiator/Cooling Assembly with sections for the following: Engine Jacket Water System SCAC (Separate Circuit After Cooler) System Hydraulics Cooling Core (Air to Oil) Power End Lube Cooling Core (Air to Oil) Fuel Cooler Core (Air to Fuel) Ladder for top fill access 2.2.2 Fuel System This unit will be equipped with a diesel fuel storage and distribution system with the following specifications: Two (2) 200 Gallon Fuel Tanks configured as follows: Polished aluminum construction 26” diameter cylindrical build w/ capped ends Fuel cooling core included in fuel return lines 1-1/2” Drain plugs on tank ends 2” equalizing crossover between tanks Tank breather fittings Filtration screen installed in fill necks Fuel level sending unit Tank fill necks accessible from the ground for filling Tanks “soft” mounted to unit via rubber lined straps and cradles 2.2.3 Power Take-Offs The following documentation will be provided with each unit: One bound paper copy of the Unit Operations and Service Manual One electronic copy (on CD) of the Unit Operations and Service Manual 3.5 Unit Testing The unit will be tested according to the Standard Manufacturing test plan ...
Location: HOUSTON Date Posted: Tuesday, April 21, 2015
Condition: NEW Price: POR
view details
For Sale: TRAILER MOUNTED BLENDER
NEW READY TO SHIP NOW 140 BPM Trailer Mounted Blender 1.0 General Unit Specification This technical specification covers the construction and design requirements for a 1600 HP Trailer-Mounted Blender unit capable of blending and delivering homogeneous slurry mixes required for oilfield fracturing and stimulation services in ambient conditions of -40 °F (-4.5 °C) to 120 °F (49 °C). The unit will be equipped to convey and introduce fracturing proppants, dry chemical products, and liquid chemical products to the process slurry through a well designed and maintainable fluid handling system. Manual and automated controls will be installed on the unit to allow complete operator control and customized programming for job specific applications and treatment plans. 1.1 Unit Operational Limits The unit, as specified, will be capable of pumping the following pressures and rates: Maximum working fluid rate: 140 BPM (20,668 LPM) Maximum discharge pressure: 80 PSI (550 kPa) Maximum fluid density obtainable: 6 PSA/GAL (1.6 SG) 1.2 Unit Dimensions & Permitting The unit dimensions (excluding the customer supplied tractor) will be within: Length: 44’-0” (14 meters) Width: 8’-6” (2.6 meters) Height: 13’-6” (4.1 meters) Weight: 65,000lbs (29,483 kgs) Est. The unit/tractor combination will comply with all US & TX DOT regulations for unit dimensions, but could exceed the standard 80,000lbs vehicular weight allowed depending on customer tractor selection. Axle loading will be properly distributed to allow overweight/oversize permitting in the continental United States and compliance with US Federal Bridge Law. The unit systems are detailed as follows: 2.0 Equipment Systems 2.1 Trailer Specifications The trailer will be a heavy duty, mobile, multi-purpose platform that will include the following features and compliances: US and TX DOT Compliant for On-Road Transportation A36 Steel Beam/Frame Construction (at minimum) w/ frame members built on 35” centers Heavy duty 2” King Pin with 3/8” Bolster Plate mounted to receive a 52” tall fifth-wheel Standard tractor air “glad-hands” and electrical connectors accessible at the front of trailer Sealed electrical wiring and protected air-lines Dual Axle w/ 25,000lb rated axles and 50,000lb rated Monopivot Air-Ride Suspension 16 ½” x 7” S Cam Brakes w/ ABS system installed on both axles Eight (8) 11R22.5 Tires Eight (8) 8.25 x 22.5, 10-Hole, Hub Piloted Wheels Holland Mark V Heavy Duty Landing Gear, manual 2-speed gearbox crank DOT compliant vehicle lighting and conspicuity marking Heavy duty Rubber Mud-Flaps installed on rear axle Steel Fenders 2.2 Power Units/Drivetrains 2.2.1 Discharge Pump Drive Engine ...
Location: HOUSTON Date Posted: Tuesday, April 21, 2015
Condition: NEW READY TO SHIP Price: POR
view details
For Sale: IDECO H30 500 HP RIG 5000 FT RATING
COMPLETE READY TO GO TO WORK, NUMEROUS SPARE PARTS AND TOOLS NOT SHOWN ON INVENTORY. SOLD AS IS WHERE IS, SUBJECT TO PRIOR SALE, SUBJECT TO SUBSTITUTION OF COMPONENTS. DRAWWORKS Ideco 30 HDD 500 HP Powered by: 1 Cat D-3408 with 5-speed Automatic Transmission Auxiliary Brake: Fawick Air Clutches, HAS 48” Single Disc Brake POWER 200 kW Generator 3406 Cat #1 PUMP Ideco MM 550 Duplex Powered by: Cat D-379 #2 PUMP Emsco D-300 HP Powered by: Cat D-353 MAST 96' Hydraulic ‘fold under’ Hopper Derrick rated at 250,000# 1" drilling line on 6 lines SUBSTRUCTURE Sub – 8’ 8” High - Telescopes to 10’4” From Ground with 16’ Wide Floor TRAVELING Block: Ideco Shorty – 110-Ton Blocks, 3 Sheave Unitized Block & Hook EQUIPMENT Swivel: Grey Type F ROTARY TABLE 27½" Oil Well Rotary Table BOP EQUIPMENT Ram Preventor: 11” Shaffer LWS 3,000 lb. Annular Preventor: 11” Shaffer Annular 3,000 lb. Closing Unit: Koomey 80-Gallon with Electric over Air Hydraulic Pumps 2” 3,000 lb. Complete Manifold with Gauges and Chokes DRILL PIPE 150 jts. of 4" pipe DRILL COLLARS (15) - 5¾" Drill Collars – 4" H-90 Threads MUD SYSTEM Working Pits: Shale: 8' X 9' X 5' - 64 bbl Sand: 14' X 9' X 5' - 112 bbl Suction: 13' X 9' X 5' - 104 bbl SOLIDS CONTROL Shale Shaker: Swaco linear motion EQUIPMENT AUXILIARY Water Tank: 480 bbl EQUIPMENT Fuel Tank: 2,500 gallon capacity Survey Instrument: Sureshot Mud House: 12' X 40' X 4' Transformer: Square D 460 volt ...
Location: Date Posted: Tuesday, April 21, 2015
Condition: USED Price: POR
view details
For Sale: 6000 FT DRILLING RIG TRAILER MOUNT
Dugan DS5 500 HP Powered by: 1 Caterpillar 3408 Auxiliary Brake: Parmac 122 2 - 3306 and 3406 Caterpillar Caterpillar 3404 engine Ideco 550 Duplex Powered by: Cat D-379 OPI 700 HP Powered by: Caterpillar D-379 94' Lee C. Moore 200,000# 10' Lee C. Moore 300,000# capacity Block: Gardner Denver 100 ton Hook: BJ 100 ton Swivel: Ideco 150 ton Top Drive: N/A National C-175 - 17 1/2" Ram Preventor: Shaffer 9" 3000# LWP Annular Preventor: Taurus Regan Closing Unit: Koomey - 40 gallon with electric over air Hydraulic pumps with air remote floor panel 3 1/2" 13.30# 3 1/2" IF (150 jts) 15 - 4" H90 Working Pits: Shale: 1 tank Sand: 200 bbl Suction: Premix Pit: Mud Mixing Pump: 1 Mission Magnum 5 X 6 X 10 Shale Shaker: 1 - Swaco linear motion Water Tank: 350 bbl Fuel Tank: 4,200 gallons Survey Instrument: A-1 Sure-Shot 7 degree Dugan DS5 500 HP Powered by: 1 Caterpillar 3408 Auxiliary Brake: Parmac 122 2 - 3306 and 3406 Caterpillar Caterpillar 3404 engine Ideco 550 Duplex Powered by: Cat D-379 OPI 700 HP Powered by: Caterpillar D-379 94' Lee C. Moore 200,000# 10' Lee C. Moore 300,000# capacity Block: Gardner Denver 100 ton Hook: BJ 100 ton Swivel: Ideco 150 ton Top Drive: N/A National C-175 - 17 1/2" Ram Preventor: Shaffer 9" 3000# LWP Annular Preventor: Taurus Regan Closing Unit: Koomey - 40 gallon with electric over air Hydraulic pumps with air remote floor panel 3 1/2" 13.30# 3 1/2" IF (150 jts) 15 - 4" H90 Working Pits: Shale: 1 tank Sand: 200 bbl Suction: Premix Pit: Mud Mixing Pump: 1 Mission Magnum 5 X 6 X 10 Shale Shaker: 1 - Swaco linear motion Water Tank: 350 bbl Fuel Tank: 4,200 gallons Survey Instrument: A-1 Sure-Shot 7 degree ...
Location: Date Posted: Tuesday, April 21, 2015
Condition: USED GOOD Price: POR
view details
For Sale: 16 Port manifold trailer
NEW READY TO SHIP NOW 16 Port manifold trailer...
Location: HOUSTON Date Posted: Tuesday, April 21, 2015
Condition: NEW READY TO SHIP Price: POR
view details
Next >
Last >>

>> Do you have surplus equipment to sell?  Post an ad on Rigzone.com and start receiving leads today.


Freemyer Industrial Pressure           SST Energy Corp.

Millquip, LLC           Premier Pressure Pumping

SRG International, LLC           Makk Tec Services Ltd

CraneWorks, Inc.           Total Oilfield Equipment & Supply, LLC

Oilfield Swivel Repair          
view all featured companies
become a featured company
Events  SUBSCRIBE TO OUR NEWSLETTER

Our Privacy Pledge
SUBSCRIBE