|
|
| Listing ID: 8972 |
Date Posted: 1/7/2009 |
Ad Type: For Sale |
 |
|
Location: |
|
Houston
|
|
Price: |
|
Call for Pricing
|
|
Condition: |
|
Brand New
|
|
|
XJ550 Carrier Workover/Drilling Rig
Main technical parameters:
Service depth 7000m (23000’)(f2 7/8”tubing)
Workover depth: 5800m (19029’)(f2 7/8”DP)
Rated static hook load: 120t (265000lbs)
Rated Horsepower, engine: 475hp/2100rpm
Height, mast: 32m (104’)
Height, racking board (to ground): 55’
Height, simple platform: (4’, 8’, 12’ adjustable)
Traveling system: 4×5
Drive type, carrier: 10×4
Dia., wireline: f26mm (f1” )
Traveling dimensions: 17.6m×2.9m×4.27m
(57.74’×9.5’×14
Mast type: JJ155/35-W 1 set
API 4F Certified.
Technical parameters:
Max. hook load: 1470KN
Effective mast height: 35m
Racking platform capacity: 2000m (5’’ DP)
Wind rate: 115km/h
2 substructure Type: DZ147/5-S 1set
Features:
API SPEC 4F Certified.
Equipped with BOP shifter making it convenient for installing BOP and
wellhead equipment.
Equipped around the substructure are handrails, which are 1.2m high and
consist of two square pipes and foot plates. Foot plates are inserted into the
square pipes to form the handrails, which are easy dismantled.
Includes escape slide for emergency departures.
Technical specifications:
Floor height: 5m
Clear height below rotary beam: 4m
area: 5×8m
Max. load capacity: 1925KN
Setback capacity: 2200m (5’’ DP)
Transportation size: 5000×2800×3300mm×2
Drawworks Type: JC450-S 1 set
Technical specifications:
Rated input power: 450KW
Max. fastline pull: 210KN
Braking type: belt brake and auxiliary brake
Protection method, crown saver: over roll valve
Main drum size: “480×914.5mm
Brake rim size: “1070×310mm
Sand drum E630 1 set
Sand drum capacity: 2000m
Applicable sandline dia.: “14.5mm
Max. sandline pull: 115KN
Sand drum size: “324×1016mm
Brake rim size: “1070×210mm
Auxiliary brake Type: 202 hydraulic brake 1 set
Max. outlet temperature: 820C
Max. water pressure: 0.171Mpa
Max. rotating speed: 1550rpm
Max. hook load at average falling speed: 1176KN
Max. speed at average falling speed: 1.5m/s
Deadline anchor Type: ZJ200 1 set
10 lines’ maximum pull is 200T
Crown block TC155 1 set
Fastline wheel dia.: “795mm
Crown block wheel dia.: “655mm
Sandline wheel dia.: “500mm
Max. load capacity: 1548KN
Traveling block & hook Type:YG150 1 set Max. hook load: 1470KN
Number of sheaves: 4 (5000×2800×3300mm)
Sheave dia.: “670mm
Applicable wireline dia.: “29mm(1-1/8’’)
Drilling line “29-6X19-RHRL 1 set
Dia.: “29mm(1-1/8’’)
Applicable length: 380m
Swivel Type:XSL160 1 set
As per API SPEC 8A standard
Max. static load capacity: 1600KN
Max. working pressure: 35Mpa(5000psi)
Max. rotating speed: 300rpm
Overall dimensions: 2280×1026×820mm
Dead weight: 2246kg
Kelly bar spinner Type:QF2 1 set
Brake torque : 2KN.m
Rated rotating speed: 72rpm
Rotating direction: both direction
Center tube connecting thread: 6-5/8’’Reg.LH
Weight: 450kg
Rotary table gearbox Type:E602 1 set
Gears: 5+R
Rotary table Type:ZP175 1 set
As per API SPEC 7K standard
Max. opening dia.: “444.5mm(17-1/2’’)
Max. static load: 1470KN
Max. working torque: 13.7KN.m
Max. rotating speed: 300rpm
Overall dimensions: 1935×1280×585mm
Dead weight: 3888kg
Vertical chain box 1 set
Driven by two phase climbing chains to drive rotary table
Air system 1 set
Max. displacement, air compressor: 0.7m3/min
Working pressure: 0.83-0.93Mpa
Main gas tank capacity: 0.155m3
Hydraulic system 1 set
Max. displacement of oil pump: 165L/min(1800rpm)
Max. system pressure: 13.7Mpa
Hydraulic oil: 68# anti-wear hydraulic oil
Oil tank capacity: 833L
Main overflow valve pressure: 14Mpa
Hydraulic cathead 1 set
Make-up stroke, oil cylinder: 1600mm
Break-out stroke, oil cylinder: 1200mm
Cathead pressure while making up: 80KN
Cathead pressure while breaking out: 100KN
Hydraulic winch type:YJ-3 1 set
Rated pressure: 30KN
Average line speed: 27m/min
Wireline capacity: 100m
Wireline dia.: 15.5mm
Hydraulic winch Type:YJ-5 1 set
Rated pressure: 50KN
Average line speed: 11m/min
Wireline capacity: 100m
Wireline dia.: 20.5mm
Load ramp 1 set
Transportation size: 8000×3100×450mm
Dead weight: 8000kg
Accessories 1 set
Including ramp, cat walk, pipe rack, escape slide and BOP trolley.
Carrier 1 set
Drawworks assembly, variable gearbox, air system, hydraulic system
and two hydraulic winches are installed on the carrier and transported as
a whole.
Overall dimensions: 13550×3100×290mm(without
mast)
Base distance: 1300+1300+4655+1370+1370mm
Wheel distance: 2180mm
Drive style: 12×8
Approach angle: 270
Departure angle: 17.30
Min. turning dia.: 36m
Max. climbable gradient: 32%
Tyre: 18-22.5
Cab air conditioner, engine oil preheater, walkway guard rail, spare tyre
rack.
Diesel engine type: CAT3412 1 set
Features:
Protection against water lacking, low oil pressure, high temperature and
overspeeding, etc..
Technical specifications:
Output power: 485KW/2100rpm
Max. torque: 2550N.m/1300rpm
Transmission ALLISON S6610 1 set
Gears: 6+1R
Right angle gearbox type: E630-09 1 set
Max. input rotating speed: 2100rpm
Max. working torque: 11000N.m
|
|
Equipment Photos:
|
|
|
|
|
|
|
|
|