EQUIPMENT MARKETPLACE
SEARCH MARKETPLACE
SUBSCRIBE
Category: Drilling Rigs - Land Ads
Your Equipment Criteria:  Category: Drilling Rigs - Land
  

139 ads found    Page 1 of 6

For Sale: National 80-B 1000 HP Complete Drilling Rig - CDR-0006
National 80-B Single Drum 1000 HP Drawworks Lebus 1-1/4" Parmac 481 Hydromatic Brake National 3 Section Compound, Each Section With CAT D379 Engines, Air Starters, Radiators National C-245-125 Torque Convertors, Oilworks 390 Air Compressors Each Section Is Shed Covered DSI 142'H x 24'W Cantilever Mast 769,000# SHL Crown Block With Six 48" Sheaves, One 56" Fastline Sheave DSI 21'6"H x 42'W x 57'L Box-On-Box Substructure With 16'H Step Down Two Gardner Denver PZ 9 Triplex Mud Pumps With Forged Steel Fluid Ends Hydril K-20-5000 Pulsation Dampeners Chain Driven Powered By CAT D398 Engines Air Starter, Radiator, Air Clutch, Master Skidded Kato 300 kW & Bemac 300 kW AC Gen Sets Each Powered By CAT D353 Engines National A-275 27.5" x 53.25" Rotary Table Two 2.25" x 94" Elevator Links Doghouse, Parts/Change House, Mud Suction Tank, Shaker Tank, Water Tank, Diesel Tank, Junk Box Mud System Package Brandt Tandem Linear Motion Shale Shaker Additional Items Not Listed All Equipment Is Located At Bridges Equipment LTD Please Contact Us For More Information About This Drilling Rig Reference Rigzone Listing ID or CDR-0006 Sales@bridgesequipment.com 432-333-9741 Visit our Website www.BRIDGESEQUIPMENT.com...
Location: Odessa, TX Date Posted: Thursday, September 08, 2016
Condition: Good Price: Price Upon Request
view details
For Sale: Skytop Brewster N-95 Complete Drilling Rig - CDR-0003
Skytop Brewster N-95 Single Drum Drawworks Powered By Three CAT 398TA Diesel Engines Drilling Structures 142'H x 25'W Cantilever Mast 850,000# SHL 21'H Box-On-Box Stepdown Structures 400,000# Setback Two Oilwell A-1100PT Triplex Mud Pumps With Fluid Ends, Quick Change Caps, Hydril K-250-5000 Pulsation Dampener, Surge Chamber, Oteco 3" Relief Valve, Mission Magnum 5 x 6 Charge Pump, Belt Driven Units, Oteco 4" and Demco 2" Valves, Drive Assembly, Skidded Joy 500 Ton Hook Change House, Fuel Tank, Mud System Package, Suction Tank, Volume Tank, Shaker Tank, Pusher House, Skidded Junk Box Kato 350 kW Generator Powered By CAT 353TAC Diesel Engine With Electric Starter, Radiator, Gauges, Quincy Q&B-50 Air Compressor Powered By Electric Motor Two Quincy Air Compressor, Belt Driven Powered By GM 2-71 Diesel Engine With Electric Starter All Equipment Is Located At Bridges Equipment LTD Please Contact Us For Additional Information and Details On This Drilling Rig Reference Rigzone Listing ID or CDR-0003 Sales@bridgesequipment.com 432-333-9741 Visit our Website www.BRIDGESEQUIPMENT.com...
Location: Odessa, TX Date Posted: Thursday, September 08, 2016
Condition: Good Price: Price Upon Request
view details
For Sale: RMI 1000 Complete Drilling Rig - CDR-0005
RMI 1000 Single Drum Drawworks Powered By Two Cat D379 Engines Two National C-245-125 Torque Convertors DSI 136' H 550,000 SHL Mast (5) 42" and (1) 52" Sheaves, Mast Stand, Racking Board DSI 18'H x 46'L Box-On-Box Sub Structure KATO 350 kW Gen Set Powered By CAT D353 Diesel Engine With Electric And Air Starter TWO Gardner Denver PZ 9 Triplex Mud Pumps With Southwest Style Fluid Ends Powered By CAT D398 Engines With Air Starters Mud Systems Package Mud Tanks, Doghouse, Parts/Change House, Diesel Tank All Equipment Is Located At Bridges Equipment LTD Please Contact Us For More Information About This Drilling Rig Reference Rigzone Listing ID or CDR-0005 Sales@bridgesequipment.com 432-333-9741 Visit our Website www.BRIDGESEQUIPMENT.com...
Location: Odessa, TX Date Posted: Thursday, September 08, 2016
Condition: Good Price: Price Upon Request
view details
For Sale: Two Bridges MI-1300 Complete Land Drilling Rigs
Bridges MI-1300 Complete Drilling Rigs (Each Rig Comes With The Following Components) Bridges MI-1300, 1300HP Heavy Duty Single Drum Drawworks Powered By Two CAT C-18 Engines DSII 750000# Mast and Box On Box Structures Refurbished Continental Emsco FB1600 Triplex Mud Pumps Powered By NEW CAT 3512HD Engines 1000 Barrel Pit System Complete With Water Tanks, Dog House, Change/Parts House, New Generator House Rebuilt National 650G500 Block and Hook Combo Rebuilt LB400 Swivel New 27.5" National Type or Emsco Type Style Rotary Table With Master Bushings Bridges Equipment will assembly all rig components (stand pipe, stand pipe manifolds and valve, etc.) and perform all necessary plumbing, and piping (rotary hose, vibrator hose, mud lines, choke manifold, etc.) After all components are assembled a function test will be conducted for customer approval. Rig will then be disassembled and painted to customer specifications All Equipment Is Located At Bridges Equipment LTD Please Contact Us For More Detailed Information On This Rig Reference Rigzone Listing ID or CDR-0001 Visit our Website www.BRIDGESEQUIPMENT.com...
Location: Odessa, TX Date Posted: Thursday, September 08, 2016
Condition: NEW Price: Price Upon Request
view details
For Sale: Skytop Brewster N-95 Drilling Rig
Skytop Brewster N-95 Drilling Rig All Equipment Is Owned & Located At Bridges Equipment in Odessa, TX Please call or email for more information on this drilling rig. Reference Rigzone Listing ID or CDR-0008 Click Here to see more details...
Location: Odessa, TX Date Posted: Thursday, August 21, 2014
Condition: Good Price: Price Upon Request
view details
For Sale: Skytop Brewster N-42 Complete Drilling Rig
1 SKYTOP-BREWSTER N-42 DRWWKS, S/N 420030, LEBUS F1 1/8in DRILLES CONSOLE CATHEADS 2-ENGINE IN-LINE COMPOUND PB 2 CAT 3406A 750HP DIESEL ENGINES, S/N: 9OU18441 & 9OU12599, ALLISON TC-525 TORQUE CONVERTERS, (2) QUINCY 325LVDL AIR COMPRESSORS, ON COVERED SKID W/FLOURESCENT LIGHTS (70205) 2 LEE C MOORE 126’H 350,000# CANTILEVER MAST, CROWN BLOCK W/(5) 36” SHEAVES, (1) 32” SHEAVES & 36” FASTLINE SHEAVE F/1-1/8” LINE, RACKING BOARD 4” STANDPIPE, RIG-A-LITES, MAST STAND (CAT IV INSPECTION 6-12-12) (70205) 3 11’H X 18’W X 45’L BOX-ON-BOX SUBSTRUCTURE, ROTARY BEAMS,V-DOOR RAMP, SWING-OUT DOGHOUSE SUPPORTS, STAIRS, SAFETY RAILS, (2) AIR COMPRESSORS (CAT IV INSPECTION 6-12-12) (SS170247) 4 (2) 2’H X 50”W X 45’L PONY SUBS 5 IDECO SHORTY 160-TON BLOCK (TRA70202) 6 1-1/8” DRILL LINE W/SPOOL & STAND 7 GARDNER DENVER PZ-8 TRIPLEX PUMP P/B CAT 398 DIESEL ENGINE 6”X5” CENT CHARGE PUMP, PULSATION DAMPENER, QC CAPS, PRESSURE GAUGE P/B CAT 398 WITH RADIATOR , AIR STARTER GAUGES, FUEL TANK & COMPRESSOR AIR TANK, SKIDDED (MPU70218) 8 GARDNER DENVER PZ-8 TRIPLEX PUMP P/B CAT 398 DIESEL ENGINE, 6’ x 5” CENT CHARGE PUMP, PULSATION DAMPENER, QC CAPS, PRESSURE GAUGE P/B CAT 398 WITH RADIATOR, AIR STARTER GAUGES, FUEL TANK AND COMPRESSED AIR TANK, SKIDDED (MPU70220) 9 MAGNAMAX DVR 572RSL4025 380KW ELECTRIC GENERATOR, S/N-MX146700710, P/B CAT 3406B DIESEL ENGINE S/N-4RG01274, WITH ELECTRIC STARTER, RADIATOR, SKIDDED & MAGNAPLUS 433PSL6216 3400KW ELECTRIC GENERATOR S/N-MX15572704741, P/B CAT 3406B DIESEL ENGINE, S/N-2WB00125, WITH ELECTRIC STARTER, RADIATOR, SKID-MOUNTED IN 8’W X 30’L STEEL UTILITY HOUSE WITH SQUARE D CONTROL PANELS, SQUARED D TRANSFORMER, FLUORESCENT LIGHTS, SKIDDED (GES70203) 10 CONTINENTAL EMSCO T-1750 ROTARY TABLE, S/N-4121, WITH SPLIT MASTER BUSHINGS (RTA70208) 11 INTER-AMERICAN OIL WORKS 1600 WIRELINE MACHINE, S/N-MC7259 (WIR70233) 12 CHOKE MANIFOLD WITH (3) 2-1/16” 5000# GATE VALVES (MA70205) 2-1/16” MANUAL CHOKE 13 KOOMEY 4-STATION CLOSING UNIT WITH CAT TRIPLEX CHARGING PUMP P/B 10 HP ELECTRIC MOTOR, (8) 10-GALLON ACCUMULATOR BOTTLES, HYD RESERVOIR, SKIDDED (ACC70207) 14 FAB TECH 8’W X 10’H X 25’L TOP DOGHOUSE WITH 5’ PORCH, AUTO DRILLER, PEN RECORDER, LOCKERS, S/N-2008 (DH070292) 15 8’W X 30’L STEEL CHANGE/PARTS HOUSE WITH ROUND TOP, LOCKERS, BENCHES, PARTS BINS, HEATER, FLUORESCENT LIGHTS, SKIDDED (DHO70207) 16 8’W X 8’H X 20’L PARTS HOUSE (CONVERTED CONTAINER) WITH STEEL SHELVES AND INTERIOR LOCKING STORAGE ROOM (DHO70234) 17 7’9”W X 4’H X 24’10”L FUEL TANK WITH 4-COMPARTMENT LUBESTER, (2) MYERS CENTRIFUGAL PUMPS, JUNK BOX WITH HOSES (FTR70225) 18 5000BBL WATER TANK WITH MISSION 2”X 3” CENTRIFUGAL PUMP P/B 20HP ELECTRIC MOTOR (WTT70237) 19 6’H X 12’W X 40’L MUD TANK WITH 10’ COVERED PORCH, (2) COMPARTMENTS WITH (3) MOTORVARIA TYPE PB 103 MUD AGITATORS, MIXING TABLE, (2) MISSION MAGNUM 5” X 6” X 11” CENTRIFUGAL PUMPS P/B 75HP ELECTRIC MOTORS, TOP-MID WALKWAYS, SAFETY RAILS, SKIDDED (SUC70223) 20 6’H X 12’W X 40’L MUD SHAKER TANK, (3) COMPARTMENTS, 2-CONE DESANDER, TOP-MTD WALKWAYS, SAFETY RAILS, SKIDDED (SHA70216) 21 (2) 4’4”W X 42”H X 26’L CATWALKS (CTU70207) 22 5-BBL SLOGGING TANK, (2) MISSION 1” X ½” CENTRIFUGAL PUMPS P/B ELECTRIC MOTORS 23 43”H X 21’10”L, 43’H X 13’6”L, 43’H X 27’L AND 41’H X 12’6”L TRIANGULAR PIPE RACKS 24 4” TO 4-1/2” 175-TON E725 ELEVATOR 25 SDXL 4-1/2” SLIPS, TYPE A 6-3/4” TO 8-1/4” DC SLIPS, AOT 16-109 DC SLIP 26 PALLET ASST’D SUBS AND SAVER SUBS 27 PALLET ASST’D LIFT SUBS All Equipment Is Located At Bridges Equipment LTD Please Contact Us For More Information About This Drilling Rig Reference Listing ID Or CDR-0007 Sales@bridgesequipment.com 432-333-9741 Click Here to see more details ...
Location: Odessa, TX Date Posted: Tuesday, August 13, 2013
Condition: Good Price: Price Upon Request
view details
For Sale: 2000 hp National 1320 UE Land Rig
Drawwork National 1320 UE Drum Grooved for 1 3/8in wire line Sand reel complete with 12000 ft of 9/16in sand line Make up and Brake out cathead complete with 2 GE 752 DC Motors 1 crown o matic 1 driller console with 1 Elmago Brake 6032 cooling system with water tank equipped with 1 of 3x4 Mission Centrifugal Pump driven by electric Motor Mast Make by Branham low lift Cantilever Height 147 X 30 feet capacity 1000000 lbs Static Hook Load 750,000lbs at 12lines. Mast front leg I beam and rear leg angle section Maximum wind load capacity with pipe racked in mast 75 mph Racking Platform capacity 5in DP 173 stands, four stand 10in DC, eight stand of 6 1/2im DC Complete with 1 Deadline anchor 1 Monkey board 1 Stabbing board Substructure Make by Branham Swing low lift Cantilever Static Rotary Beam Capacity 750,000lbs Set back capacity 700,000 lbs. Height to rotary beams 20' - 6" Drill floor height 25 feet 37 feet wide. 1 sub base floor lb 01 1 sub base floor lb 02 1 bottom box driller side 1 bottom box off driller side Complete with 1 Vee door complete 1 Catwalk 1 Doghouse Crown National 6 X 50” Dai meter sheaves. 1 X 50” diameter fast line. Travelling Block and Hook Block National 500 ton Unitized Travelling Block, 500 Ton Hook BJ Dynaplex Swivel National P500 capacity 500 ton Rotary Table National C 37 ½” with independent drive & transmission. Complete with a) 1 DC Motor : Make# GE 752AR1S b) 1 Transmission : Oilwell C 700 c) 1 oil pump with 2 hp motor Elevator links 2 set of Varco ELEVATOR LINKS 3-1/2” x 114” X 250 TON & 4-1/2” X 154” X 350 TONS Kelly Spinner 1 Varco 660 air operated Rig Power 1 set of 4 bay SCR Rosshill System complete with MCC panel and air conditioning unit with 4 set of Cat 3512 engine with kato generator feeding into SCR/MCC house. Mud Pump 3 ea National 12P160 Input power : 1600 hp with 2 DC Motors,Blower motors 10HP c) Supercharger pump 1 d) Liner cooling pump 1 Halco 1 x 1.5C Model# N 12 P 160 With 5hp motor e) Lube oil gear pump 1 (belt driven) f) Pulsation Dampner 1 Hydril 16 Gal, 5000 psi g) Pressure relief Valve 1 Retsco Reset relief valve 1500 – 5000 ps Mud System 4 Mud System with mission pump comprises of the following tanks A. 1500 BBL 3 tank mud system complete with eight 10 HP agitators six B. 6x8 centrifugal pumps with 80 HP motors 5x6 centrifugal pumps with 60 HP motors 4x5 centrifugal pumps with 40 HP motors C. three Derrick 503 shakers D. one SEE-FLO Type Degasser Make: Milchem Drilling Control With 10hp motor Vacuum Degasser 1200 gpm E. MI Swaco Mud Cleaner type 518 complete stainless steel 316L w/ mission pump 1200 gpm two High Shear Mud Hoppers One drill water tank 500 bbl with mission pumps Blowout Preventer 1 Cameron 13-5/8” 5000 psi. Double Ram BOP flange top & bottom with large shear bonnet with tandem booster w/ 2 side outlet 4 1/16 5k. 1 Cameron 13-5/8” 5000 psi Single Ram BOP flange Top & bottom dressed with standard bonnet w/ 2 side outlet 4 1/16 5k. 1 Cameron 21-1/4" 2k Double Bop flange top & bottom dress with large shear bonnet in lower cavity with tandem booster. w/ 2 side outlet 4 1/16 5k. 1 Shaffer 21-1/4" 2k Annular BOP Spherical type studded top and flange bottom. 1 Hydril Annular BOP Type : GK-14- 5000 psi 13-5/8’’ 5000 psi studded top & flange bottom. 1 Drilling Spools 3ft 5000psi with 2 side outlet 2-1/16" 5k. Accumulator Unit 1 unit BOP control unit Mfg. Koomey complete w/ 6 station accumulator 10 bottle 11 gallon & one electric pump and two air pumps WP 2000psi & 10hp motor c/w 1 ea remote panels c/w 120ft Umbilicals. Choke Manifold Choke manifold WITH 9 EA 3-1/8” X 5000 psi with two 2-1/16” adjustable choke and one 3-1/16” hydraulic choke.& 2 EA 4-1/16’ MANUAL GATE VALVE Choke Line 3-1/8" 5000psi with 2ea gate valve & 1ea HCR hyd valve. Wireline Unit 1 Mathey driven by Hydraulic wire line unit High Pressure Testing Unit 1 unit of Koomey one hp testing unit air operated complete with chart recorder Hydraulic Power Unit 1 unit of Hydraulic unit complete with hydraulic pump driven by diesel Detroit engine 92. Power Tong 1 Eckel 13 3/8” complete with 13 3/8”, 10 ¾”, 9 5/8” and 7” heads Manual Tong BJ manual tong MS type complete w/ lug jaw 1 set, type B complete w/ lug jaw 1 set, type DB complete w/ lug jaw 1 set, type SDD complete w/ lug jaw 2 set. Air Winch Air Winch on rig Floor with 5/8” line 2 Ingersol-Rand H5UL (Off driller side) Pull rating : 7800 lbs @ 1st wrap stall ANSI Rating : 3000 Lbs Kelly Bushing 2 of varco Kelly drive bushing varco HDP w/ 4 ½” & 3 ½” Kelly 2 square Kelly 4 ½” & 3 ½”, 2 upper cock 3 ½” – 5”, 2 lower cock 3 ½” – 5”. Any further details or information don't heitate to email to info@mbgoilfield.com ...
Location: Middle East Date Posted: Monday, January 16, 2017
Condition: Completely Refurbish Price:
view details
For Sale: Schramm T130
2003 Schramm T130. 130,000.00 lb. hoist, Top Head drive drill. Set up for 30 ft. RD20 type drill rod. Single Rod Loader. 52 ft. Head Travel. MTU 2000 760 hp. No Compressor. Change House(2500 gal. fuel storage), Soap House with 75 gpm Bean pump. Soap house with 75 kw generator/light plant. Sub-structure for drill....
Location: New Mexico Date Posted: Tuesday, January 10, 2017
Condition: Good Price: 400,000.00
view details
For Sale: 1500HP Diesel Electric Land Rig
Drawworks: 110-UEC,1500 HP, grooved for 1-3/8” drill line with two (2) refurbished series wound DC traction motors and Wichita 336 auxiliary brake. Mud Pumps: Two (2) Weatherford MP-16, 1600 HP packages each with master skid, two (2) refurbished series wound DC traction motors, drive sheaves, belts, belt guards, charge pump and liner wash system. Mast: 152’, 1,000,000 lb SHL with crown containing six (6) main cluster sheaves and one (1) fastline sheave. Mast to include racking board, belly board and raising lines. Substructure: 30’ self elevating, 1,000,000 lb hook load, 600,000 lb setback, complete with two (2) sets of stairs from drill floor to ground, one (1) set of stairs from drill floor to water/trip tank, v-door, mousehole and rathole. Rig Power: 3x4 SCR system/control house with 750 KVA main transformer, 150 KVA lighting transformer and adequate MCC to operate the rig. Three (3) Caterpillar 3512C diesel engines each with Caterpillar SR4, 1225KW, 1750 KVA generator and radiator. Each generator set to be packaged on a 10’ wide x 40’ long master skid with roof and muffler. Two (2) 25 HP compressors, cold start, air dryer and two (2) volume tanks to be included. Mud System: 1500 BBL, 3 tank mud system complete with eight (8) 10 HP agitators, four (4) 8X6 centrifugal pumps with 75 HP motors, two (2) linear shakers, one (1) 2 cone desander, one (1) 16 cone desilter, one (1) vacuum degasser and one (1) mix hopper. Miscellaneous: -Driller’s side doghouse -Change/parts house -500 ton block, hook and swivel -27.5” rotary table -Deadline anchor -Brake cooling tank skid with two (2) centrifugal pumps and heat exchanger cooler for brake cooling -Choke manifold and mud gas separator skid -6 Station closing unit -Fuel tank with transfer pumps -Water tank/trip tank combo with transfer pumps -Five Star Retriever wireline unit -Air powered drill line spooler with drill line Ex-Works, Applied Machinery Corporation, Houston, Texas...
Location: Houston, TX Date Posted: Monday, January 09, 2017
Condition: New Price: Call for Price
view details
For Sale: 1200HP Parco OIME Diesel Electric Land Rig
Rebuilt Drawworks: 1200 HP, OIME SL-7 grooved for 1-1/4 inch drill line with two (2) refurbished series wound DC traction motors and auxiliary brake. New Mud Pumps: Two (2) Weatherford MP-16, 1600 HP packages each with master skid, two (2) refurbished series wound DC traction motors, drive sheaves, belts, belt guards, charge pump and liner wash system. Rebuilt Mast: 136’, 750,000 lb SHL with crown containing six (6) main cluster sheaves and one (1) fast-line sheave. Mast to include racking board and raising lines. Rebuilt Substructure: 21’ self-elevating, 638,000 lb casing, 487,000 lb setback. Complete with two (2) sets of stairs from drill floor to ground, one (1) set of stairs from drill floor to mud system, v-door, catwalk, mousehole and rathole. Height under rotary beams is 17’4” to the ground. New Rig Power System: 3x4 SCR system/control house with 750 KVA main transformer, 150 KVA lighting transformer and adequate MCC to operate the rig. Three (3) Caterpillar 3512C diesel engines each with Caterpillar SR4, 1750 KVA generator and radiator. Each generator set to be packaged on a 10’ wide x 40’ long master skid with roof and muffler. Two (2) 25 HP compressors, cold start, air dryer and two (2) volume tanks to be included. New Mud System: 1500 BBL, 3 tank mud system complete with eight (8) 10 HP agitators, four (4) 8X6 centrifugal pumps with 75 HP motors, two (2) linear shakers, one (1) 2 cone desander, one (1) 16 cone desilter, one (1) vacuum degasser and one (1) mix hopper. Miscellaneous: New driller’s side doghouse New change/parts house New 350 ton hook/block combo and 300 ton swivel New 27.5” rotary table Rebuilt deadline anchor New instrumentation New brake cooling tank with two pumps, motors and heat exchanger New choke manifold and mud gas separator New 6 station closing unit New fuel tank with transfer pumps New water/trip tank with pumps New Five Star Retriever wireline unit New air powered drill line spooler with drill line AC Drawworks can be substituted at no additional cost. Rig package available for conversion to AC for the same selling price. Ex-Works, Applied Machinery Corporation, Houston, Texas...
Location: Houston, TX Date Posted: Monday, January 09, 2017
Condition: New & Rebuilt (90 Day Delivery) Price: Call for Price
view details
For Sale: AMC 1600HP AC Electric Land Rig
Drawworks: AMC AC-1600,1600 HP, grooved for 1-3/8” drill line with one (1) new AC traction motor. Includes a transmission gear box, emergency disc brake and a manual brake. Mud Pumps: Two (2) Weatherford MP-16, 1600 HP packages each with master skid, one (1) AC traction motor, drive sheaves, belts, belt guards, charge pump and liner wash system. Mast: 152’, 1,000,000 lb SHL with crown containing six (6) main cluster sheaves and one (1) fast line sheave. Mast to include racking board and raising lines. Substructure: 30’ self-elevating parallelogram style substructure, 1,000,000 lb hook load, 600,000 lb setback, complete with two (2) sets of stairs from drill floor to ground, one (1) set of stairs from drill floor to mud system, v-door, mousehole and rathole. Rig Power: Three (3) Caterpillar 3512C diesel engines each with Caterpillar SR4, 1750 KVA generator and radiator. Each generator set to be packaged on a 10’ wide x 40’ long master skid with roof and muffler. Two (2) 25 HP compressors, cold start, air dryer and two (2) volume tanks to be included. Rig Controls: VFD system/driller cabin with 1000 KVA main transformer, 150 KVA lighting transformer and adequate MCC to operate the rig. Driller’s cabin and touch screen controls. Mud System: 1500 BBL, 3 tank mud system complete with eight (8) 10 HP agitators, four (4) 8X6 centrifugal pumps with 75 HP motors, two (2) linear shakers, one (1) 2 cone desander, one (1) 16 cone desilter, one (1) vacuum degasser and one (1) mix hopper. Miscellaneous: -Change/parts house -400 ton block, hook and swivel -27.5” rotary table -Deadline anchor -Choke manifold and mud gas separator -6 station closing unit -Fuel tank with transfer pumps -Water tank/trip tank with pumps -Five Star Retriever wireline unit -Air powered drill line spooler with drill line Ex-Works, Applied Machinery Corporation, Houston, Texas...
Location: Houston, TX Date Posted: Monday, January 09, 2017
Condition: New (120 Day Delivery) Price: Call for Price
view details
For Sale: 2000HP Diesel Electric Land Rig
Drawworks: Rebuilt Oilwell E-2000 or National 1320-UE 2000 HP, grooved for 1-3/8” drill line with two (2) refurbished series wound DC traction motors, auxiliary brake, make-up and break-out catheads. Mud Pumps: Two (2) rebuilt Oilwell 1700 HP packages each with master skid, two (2) refurbished series wound DC traction motors, drive sheaves, belts, belt guards, charge pump and liner wash system. Mast: Rebuilt Lee C. Moore, 1,300,000 lb SHL with crown containing six (6) main cluster sheaves and one (1) fastline sheave. Mast to include racking board and raising lines. Substructure: Rebuilt Lee C. Moore 30' H, 1,300,000 lb casing, 800,000 lb setback, complete with two (2) sets of stairs from drill floor to ground, one (1) set of stairs from drill floor to water tank, v-door, mousehole and rathole. Rig Power: 4X4 SCR system/control house with 1000 KVA main transformer, 150 KVA lighting transformer and adequate MCC to operate the rig. Four (4) Caterpillar 3512C diesel engines each with Caterpillar SR4, 1750 KVA generator and radiator. Each generator set to be packaged on a 10’ wide x 40’ long master skid with roof and muffler. Two (2) 50 HP compressors, cold start, air dryer and two (2) volume tanks to be included. Mud System: 2000 BBL, 4 tank mud system complete with twelve (12) 10 HP agitators, four (4) 8X6 centrifugal pumps with 100 HP motors, three (3) linear shakers, one (1) 3 cone desander, one (1) 20 cone desilter, one (1) vacuum degasser and one (1) mix hoppers. Miscellaneous: -Driller’s side doghouse -Parts/change house -500 ton block, hook and swivel -37.5” rotary table -Deadline anchor -Brake cooling tank with two (2) pumps with motors and heat exchanger -Choke manifold and mud gas separator -6 station closing unit -Fuel tank with transfer pumps -Water tank/trip tank with pumps -Five Star Surveyor wireline unit -Drill line spooler with 7500’ of 1-3/8” drill line Ex-Works, Applied Machinery Corporation, Houston, Texas ...
Location: Houston, TX Date Posted: Monday, January 09, 2017
Condition: New and Refurbished (120 Day Delivery) Price: Call for Price
view details
For Sale: New Schramm T250XD 760HP Drilling Rig
Click to View Additional Photos & Details. Contact Dan Henderson at +1-281-661-3627.
New Schramm T250XD 760HP Drilling Rig
  • Recently Sold, Contact Us For Similar Options Up to 250,000 lbf (1,112 kN) hook load Up to 32,000 lbf (142 kN) pulldown capacity Range III tubular capability Precise hydraulic weight on bit control LoadSafe® XD automated pipe handling system to 10,000 lbs (4,536 kg) Automated rig fl oor and drilling controls ? Automated onboard and remote diagnostics DECK ENGINE · M TU 12V-2000TA DDEC · 760 bhp (567 kw) @ 1800 rpm · 1 x 110 gallon (415 l) fuel tank COOLING · T wo core, side by side heat exchanger with 56 inch (142 cm) diameter variable speed cooling fan · 130°F (54°C) ambient design temperature MAST · Telescoping mast design permits long head travel and working height, yet short overall length in transport position. No crane required for rig up · Total height to top of crown fully extended 94 ft (28.65 m) · Free-standing mast design TILTING TOP HEAD DRIVE · Heavy duty, single reduction gearbox with 4 two-speed disc valve type hydraulic motors · Infinitely variable rotation speed via HRC control · Torque: 0-120 rpm @ 19,944 ft-lb (27,040 N-m). 0-182 rpm @ 13,300 ft-lb (18,032 N-m) · Fluid line pressure: 5,000 psi (345 bar) FEED SYSTEM · 56 ft (17 m) head travel · 250,000 lbf (1,112 kN) pullback · Up to 106 fpm · 32,000 lbf (142 kN) pulldown · 200 fpm (61 m/min) pulldown speed DRILL TABLE · Table opening: 27.5 inches (687 mm) diameter with table retracted · Number 1, 2 & 3 API split bowls provided · BOP clearance under the fl oor: 13.5 ft (4.1 m) HYDRAULIC ROUGHNECK · Clamping range: 4.5 – 9.625 inch (11.43-24.45 cm) diameter · Clamping force: Adjustable up to 61,500 lbs @ 3,000 psi (273 kn @ 208 bar) · Make/break Torque: 60,000 ft-lb @ 3,500 psi (81,349 N-m @ 241 bar) LOADSAFE® XD AUTOMATED PIPE HANDLING SYSTEM · Built-in holding clamps with variable capacity from 4 - 24 inch (10 - 61 cm) allow for make-up or break-out of tool joints from top drive spindle · Capacity: Range III · Maximum lift capacity: 10,000 lbs (4,536 kg) · Average trip time: 1,250 f/h (381 m/h) CONTROL ROOM · Skid mounted, raised into position using a cantilever system via hydraulic lift cylinders · Two joystick control stations with touchscreen displays, including drill rig operator and LoadSafe XD pipe handling system operator · Onboard and remote diagnostics, including provision for third party remote data communication interface · Safety hardened, climate controlled 10 x 15 ft (3 x 4.6 m) enclosure SUB-BASE · Integral sub-base provides a stable mounting surface for the T250XD Telemast trailer · Floor height: 15 ft (4.57 m) · Working clearance under fl oor: 13.5 ft (4.11 m) - 5.0 m optional · Working diameter under fl oor: 54.5 inches (1.38 m) to accommodate 54 inch (1.37 m) annular WINCH · Planetary design with spring applied hydraulic release brake · 9,600 lbf (42.7 kN) bare drum line pull · 150 fpm (46 m/min) bare drum line speed · Hydraulic jib boom with 140° swing and 40 inch (1.02 m) extend · Aux winch and jib boom 3,000 lbs (1,363 kg) HYDRAULIC SYSTEM · Open loop load sensing system · 7 micron fi ltration ELECTRICAL SYSTEM · 24 volt DC electrical system · Designed to API 505 standards in hazardous location areas WEIGHT AND DIMENSIONS (*) Note: Primary loads, for general illustration only, varies with rig confi guration · Control room skid: 40’ L x 9’8’ W x 10’6” H @ 50,000 lbs, (12.2 x 2.97 x 3.2 m @ 22,680 kg) · LoadSafe XD: 53’ L x 8’6” W x 6’ H @ 44,000 lbs, (16.2 x 2.6 x 1.83 m @ 19,958 kg) · Sub-base: 40’2” L x 10’ W x 10’6” H @ 60,000 lbs, (12.2 x 3.05 x 3.2 m @ 27,216 kg) · Mast trailer less tag dolly: 54’8” L x 8’6” W x 13’6” H @ 100,000 lbs, (16.7 x 2.6 x 4.1 m @ 45,359 kg) (*) Optional items determine final weight STANDARD ACCESSORIES · Tool box · 50 hour maintenance kit OPTIONAL EQUIPMENT · AC drive · Dual fuel drive · Water injection, foam injection and tool lubrication systems · LED lighting package for rig deck, mast, main work area and LoadSafe XD work area · API documentation package for API-Q1, 4F, 8C, 7K · CE mark for European requirements
Click to View Additional Photos & Details. Contact Dan Henderson at +1-281-661-3627. ...
Location: Humble, TX Date Posted: Monday, January 02, 2017
Condition: New Price: Contact For Pricing
view details
For Sale: BHL BRAND NEW 3000HP X 1,500,000 LBS. HOOK LOAD LAND DRILLING RIG
BHL BRAND NEW 3000HP x 1,500,000 lbs. HOOK LOAD LAND DRILLING RIG Mast: 147’ x 1,500,000 lbs. Self-Elevating (New) Substructure: Self-Elevating (New) Mast and Substructure API 4F, 4th Edition Monogrammed and Certified, NEW Top Drive: (New) 750 Ton Rig Skidding System: (New) – Included. 5 Sections. No Limit to Number of Wells (Leap Frog Design) Drawworks: National 1625 3000HP Drill Line: (New) 5,000 ft. Type 1 ?”, EIPS, IWRC Deadline Anchor: (New) Hercules for 1,500,000 lbs. HL Traveling Assembly: (Refurbished) Block: 750 Ton Hook: 750 Ton Rotary Equipment: (Refurbished) Swivel: 750 Ton Kelly: 5 ¼”, 40 ft. Hexagonal, Rotary Table: 37 ½” Mud System (New) (3) 1600HP Triplex; Rating 7500psi Mud Tank Capacity: 3000 BBLs Total. 1500 BBLs Active, 1500 BBLs Reserve Generator Units: (New) (4) CAT Engines 3516 SCR House: (New) (4) Generator (Refurbished) Modules x (5) SCR Bays Auxiliary Equipment & Storage (All New) Instrumentation, Control and Recording Equipment BOP and Well Control Equipment (Refurbished) 5,000 psi Annular; 10,000 psi Single Ram; 10,000 psi Double Ram; 10,000 psi Drill Spool (Option for 15,000 psi System) Mud Gas Separator: 48? Diameter x 20' High Stand Pipe and Stand Pipe Manifold Rated to 7500 psi to match Mud Pump Rating...
Location: Houston Date Posted: Monday, January 02, 2017
Condition: NEW Price:
view details
For Sale: BHL BRAND NEW 2000HP x 1,300,000 lbs. HOOK LOAD LAND DRILLING RIG
BHL BRAND NEW 2000HP x 1,300,000 lbs. HOOK LOAD LAND DRILLING RIG Mast: (New) Model: 147' x 1,300,000 lbs. Self-Elevating Racking Capacity: 25,000 ft. of 5" Triples Substructure: (New) Model: Self-Elevating Casing Capacity: 1,300,000 lbs. Setback Capacity: 800,000 lbs. Total Capacity: 2,100,000 lbs. Mast and Substructure AP/ 4F, 4th Edition Monogrammed and Certified, NEW Top Drive: (New) 500 Ton NOV TDS 11S Rig Skidding System: (New) - Included. Drawworks: NOV 1320UE,2000HP (Refurbished) Drill Line: (New) 5,000 ft. Type 1%" EIPS, IWRC Deadline Anchor: (New) Hercules 1,400,000 lbs. Hook Load on 14 Lines Traveling Assembly: (Refurbished) Block: 650 Ton; Hook: 650 Ton Rotary Equipment:(Refurbished) Swivel: 650 Ton;Kelly: 5 %", 40 ft. Hexagonal Rotary Table: 37 Yz" Mud System (New) (3) 1600HP Triplex ,American Block;7500psi Active Tanks: 1500 BBLs (3 tanks) Reserve Tanks: 1500 BBLs (3 tanks) Tanks are supplied with Roofs to Keep Mud Dilution with RainWater. Generator Units: (New) (4) CAT Engines 3512C (5904HP Total) (Refurbished) (4) Generators Kato 6P6-3300 SCR House: (New) (4) Generator Modules x (5) SCR Bays Auxiliary Equipment & Storage (All New) Air compressor, Air Receivers,Air Dryer, Cold Compressor, Dog House, Change & Equipment Storage House, Fuel Tanks (3 total capac ity 750BBLs), Water Tank (2) Instrumentation, Control and Recording Equipment (New) BOP and Well Control Equipment (Refurbished) 5,000 psi Annular; 10,000 psi Single Ram; 10,000 psi Double Ram; 10,000 psi Drill Spool;Shear Ram; (1) Set Riser & Bell Nipple Choke Line Valves & Kill Line Valves;Accumulator Unit; Choke Manifold; Hydraulic Power Unit; BOP Handling System Mud Gas Separator: 48" Diameter x 20' High Stand Pipe and Stand Pipe Manifold: Rated to 7500 psi to match Mud Pump Rating ...
Location: Houston, Texas Date Posted: Monday, January 02, 2017
Condition: New Price:
view details
For Sale: BHL BRAND NEW 3000HP x 1,500,000 lbs. HOOK LOAD LAND DRILLING RIG
BHL BRAND NEW 3000HP x 1,500,000 lbs. HOOK LOAD LAND DRILLING RIG Mast: 147’ x 1,500,000 lbs. Self-Elevating (New) Substructure: Self-Elevating (New) Mast and Substructure API 4F, 4th Edition Monogrammed and Certified, NEW Top Drive: (New) 750 Ton Rig Skidding System: (New) – Included. 5 Sections. No Limit to Number of Wells (Leap Frog Design) Drawworks: National 1625 3000HP Drill Line: (New) 5,000 ft. Type 1 ?”, EIPS, IWRC Deadline Anchor: (New) Hercules for 1,500,000 lbs. HL Traveling Assembly: (Refurbished) Block: 750 Ton Hook: 750 Ton Rotary Equipment: (Refurbished) Swivel: 750 Ton Kelly: 5 ¼", 40 ft. Hexagonal, Rotary Table: 37 ½” Mud System (New) (3) 1600HP Triplex; Rating 7500psi Mud Tank Capacity: 3000 BBLs Total. 1500 BBLs Active, 1500 BBLs Reserve Generator Units: (New) (4) CAT Engines 3516 (Refurbished) SCR House: (New) (4) Generator Modules x (5) SCR Bays Auxiliary Equipment & Storage (All New) Instrumentation, Control and Recording Equipment BOP and Well Control Equipment (Refurbished) 5,000 psi Annular; 10,000 psi Single Ram; 10,000 psi Double Ram; 10,000 psi Drill Spool (Option for 15,000 psi System) Mud Gas Separator: 48" Diameter x 20' High Stand Pipe and Stand Pipe Manifold Rated to 7500 psi to match Mud Pump Rating ...
Location: Houston, Texas Date Posted: Monday, January 02, 2017
Condition: NEW Price:
view details
For Sale: BHL NEW 1500 HP x 750,000 Hook Load Land Drilling Rig
BHL BRAND NEW 1500HP X 750,000 lbs. HOOK LOAD LAND DRILLING RIG Mast:142' x 750,000 lbs. Cantilever (New) Substructure:Box-on-Box (New) Mast and Substructure AP/ 4F, 4th Edition Monogrammed and Certified, NEW Top Drive:NOV TDS 11S 500 Ton Rig Skidding System: (New) - Included Drawworks: 1500HP Drill Line: (New) 5,000 ft Type 1 %" RRLI, EIPS, IWRC Deadline Anchor:(New) Hercules Load Capacity 750,000 lbs. on 12 Lines Traveling Assembly: (Refurbished) Block: 400 Ton Hook: 400 Ton Rotary Equipment: (Refurbished) Swivel: 400 Ton Kelly: 5 ", 40 ft. Hexagonal, Rotary Table: 37½” Mud System: (2) 1600HP Triplex; Rating 5000psi Active Tank Capacity: 1000 BBLs Total. 1000 BBLs Reserve Generator Units: (3) CAT Engines 3512 (Refurbished) SCR House: (New) (3) Generator Modules x (4) SCR Bays Auxiliary Equipment & Storage (All New) Instrumentation, Control and Recording Equipment BOP and Well Control Equipment (Refurbished) 5,000 psi Annular; 5,000 psi Single Ram; 5,000 psi Double Ram; 5,000 psi Drill Spool Mud Gas Separator: 48" Diameter x 20' High BHL International Inc. ...
Location: Houston, Texas Date Posted: Monday, January 02, 2017
Condition: NEW Price:
view details
For Sale: Wilson Model 75 Double Drum Drilling Rig
Click to View Additional Photos & Details. Contact Dan Henderson at +1-281-661-3627.
Wilson Model 75 Double Drum Drilling Rig
  • Recently taken off the market. Please email for more options. Drilling Rig 1977 Wilson “Model 75” 1977 Wilson “Model 75” Double Drum Carrier Mounted Portable Drilling Unit, VIN-15023, Lebus grooved for 1 1/8 line. Parmac V-80 Hydromantic brake. Powered by two Detroit 12V-71N Diesel Engines with Allison transmissions. 110’ high 350,000# Telescoping Mast Hydraulic Raised and Scope mounted on 6-Axle Back in carrier. IDECO 160 ton – shorty block hook combination. Substructure – 14’6” with Rotary Beams V-Door Ramp, Stairs, and Safety Rails. IDECO 17 ½ Rotary Table. Drilling Rig package includes: Make & Model: WILSON Type: Model 75 Maximum Depth Rating with 4-1/2” 16.6 ppf Drill pipe: 10,000 FT Rotary Drive: Type and Size, Speed Range (rpm):20 ½ IDECO 0-150 RPM Drawworks: Main Drum: Hydromatic Brake: V80_ Cable Size: 1 1/8 Number of Clutches: 2 Make & Model: Wilson ATD-230 Sand Drum: N/A Cable Size: N/A Cable Length: N/A Engines: Make & Model: DETRIOT DIESEL (2) – 12V71N (500 HP EACH) Derrick: Manufacturer: WILSON Height:110’ Weight Capacity: 354, 000 lbs Maximum Number of Lines: 8 - Last Inspection Date: 01/30/2005 Swivel: Manufacturer: IDECO Deion: IDECO TL-200 Capacity: 200 TON Substructure: Height and Capacity: 12’ 6” 450,000lb. Height above base of substructure to underside of rotary beams: 11’ 3” Windbreak on substructure: X Yes No Traveling Blocks: Make & Model: IDECO-UTB-160 Weight Capacity:160 TON / Shorty Block Combo Full backyard available
Click to View Additional Photos & Details. Contact Dan Henderson at +1-281-661-3627. ...
Location: United States Date Posted: Tuesday, December 20, 2016
Condition: Used Price: Contact For Pricing
view details
For Sale: WILSON MODEL 75 1000HP DRILLING RIG
Click to View Additional Photos & Details. Contact Dan Henderson at +1-281-661-3627.
Click to View Additional Photos & Details. Contact Dan Henderson at +1-281-661-3627.
WILSON MODEL 75 1000HP DRILLING RIG
  • Recently taken off the market. Please email for more options. Drilling Rig 1978 Wilson “Model 75” 1000hp Carrier Mounted portable Land Drilling Rig 1978 Wilson “Model 75” Double Drum Carrier Mounted Portable Drilling Unit, Lebus grooved for 1 1/8 line. Parmac V-80 Hydromatic brake. Powered by two Detroit V1271 natural Diesel Engines with Allison transmissions. 110’ high 350,000# Telescoping Mast Hydraulic Raised and Scope mounted on 6-Axle Back in carrier. IDECO 160 ton – shorty block hook combination. Substructure – 12’ with Rotary Beams V-Door Ramp, Stairs, and Safety Rails. IDECO 20 ½ Rotary Table. Drilling Rig package includes: Make & Model: WILSON (1978) 1000hp Carrier Mounted Portable Drilling Rig. Type: Model 75 Maximum Depth Rating with 4-1/2” 16.6 ppf Drill pipe: 11,000 FT (Drill Pipe not included) Rotary Drive: Type and Size, Speed Range (rpm):20 ½ IDECO 0-150 RPM Drawworks: Main Drum: Hydromatic Brake: V80_ Cable Size: 1-1/8” Number of Clutches: 2 Make & Model: Wilson ATD-230 Sand Drum: N/A Cable Size: N/A Cable Length: N/A Engines: Make & Model: DETRIOT DIESEL (2) – V1271 natural (500 HP EACH) Derrick: Manufacturer: WILSON Height: 110’ Weight Capacity: 354, 000 lbs Maximum Number of Lines: 8 - Last Inspection Date: 10/24/2002 Swivel: Manufacturer: IDECO Deion: IDECO TL-200 Capacity: 200 TON Substructure: Height and Capacity: 12’ 450,000lb. Height above base of substructure to underside of rotary beams: 10’ Windbreak on substructure: X Yes No Traveling Blocks: Make & Model: IDECO-UTB-160 Weight Capacity: 160 TON / Shorty Block Combo. Catwalk: Length & Height: 48’ X 42”. Pipe Rack: Length & Height: 30’ X 42”. Pumps: (qty.2) #1 Gardner Denver PZ-9 (1000 HP, powered by a 398 CAT) max Liner size and stroke (6-1/2 x 9); max. Continuous operating pressure, 2000 psi; pump speed (spm) = 130 #2 Gardner Denver PZ-9 (1000 HP, powered by a 398 CAT) max Liner size and stroke (6-1/2 x 9); max. Continuous operating pressure, 2000 psi; pump speed (spm) = 130 Steel Mud Pit: Dimensions: 5’ Tall X 10’ Wide X 50’ Long. Capacity: 350 BBLS. # of compartments: 5. Shale Shaker Make and Model: Dual Derrick FLC 503 (qty. 2) Charge Pump; make and model: 4X5 Mission, RPM 1800, Impeller Size 12”, Hopper Pump; make and model: 4X5 Mission, RPM 1800, Impeller Size 10-1/2”, Other Pump; make and model: 5X6 Mission, RPM 1800, Impeller Size 10-1/2”, Desiliter Type: 8 cones, Desiliter Pump; make and model: 5X6 Mission, RPM 1800, Impeller Size 11” Light Plant: Voltage, Amperage, Watts; 300KW. Engine, Make, Model Detroit 12V71 Water Tank: 400 BBLS capacity. Dog House: Included. Parts House: Included. __________________________________________________________________ Top Drive: N/A – Not Included. Iron roughneck: N/A – Not Included. Elevators: N/A – Not Included. Drill Pipe: N/A – Not Included. Drill Collars: N/A – Not Included. BOP’S: N/A – Not Included. Rotating Head: N/A – Not Included. Accumulator: N/A – Not Included. Choke Manifold: N/A – Not Included.
Click to View Additional Photos & Details. Contact Dan Henderson at +1-281-661-3627. ...
Location: United States Date Posted: Tuesday, December 20, 2016
Condition: Used Price: Contact For Pricing
view details
For Sale: (3) HRI-700 LOADCRAFT 1000HP CARRIER MOUNTED DRILLING RIGS
Click to View Additional Photos & Details. Contact Dan Henderson at +1-281-661-3627.
Loadcraft 1000HP Carrier Mounted Drilling Rigs
  • Recently taken off the market. Please email for more options. (2) Two Rigs Available For Sale - One was recently Sold Make & Model: HRI – 700 Year Manufactured: 2003, 2005, 2006 Type: Mobile Drilling Rig Telescoping Double Maximum Depth Rating with 4-1/2” 16.6 ppf Drill pipe: 12,000 Feet Rotary Drive: Type and Size, Speed Range (rpm): __Hacker 22” 0-150 RPM Approximate number of loads to move rig: 20 Drawworks: Main Drum: Hydromatic Brake: 224 DR Cable Size: 1 1/8_ Number of Clutches: 2 Make & Model: Heartland Rig Engines: Make & Model: (2) 3406 – B Caterpillar (500 hp each Derrick: Manufacturer: Heartland Height: 116Weight Capacity: 410,000 Maximum Number of Lines: 10 Last Inspection Date: 2/26/12 Top Drive: Manufacturer: Tesco Deion: HMI 250 Capacity: 250 Ton 475hp Power Pack Substructure: Height and Capacity: 14’ 6” Rotary Beam Cap. 408,000 Set Back Cap 225,000 Height above base of substructure to underside of rotary beams: 11’6” _____ Windbreak on substructure: X Yes Traveling Blocks: Make & Model: TFI YG 180 Weight Capacity: 200 ton Number of Lines: 10 Elevators: Make & Model: 3 ½ & 4 ½ 175 Ton Bottleneck Catwalk: Length & Height: 53’ L x 40” Tall x 60” Wide Pipe Racks: Length & Height: 29’ x 40” Last inspection date & footage since last inspected: current Pumps: Make, Model, Input HP: _HRS F-1000__Qty. 2 (TWO) 1,000hp Engine Make & Model: Caterpillar Model 3508 Liner Size and Stroke Length: _6 ½ x 10’ stroke Contact for more photos & information
Click to View Additional Photos & Details. Contact Dan Henderson at +1-281-661-3627. ...
Location: United States Date Posted: Tuesday, December 20, 2016
Condition: Used Price: Contact For Pricing
view details
For Sale: Ideco / SBS DIR379S Work-over & Servicing Rig
ETI 010601 Mobile Rig Model : DIR 379 S Make : IDECO // SBS Type : Work-over and servicing rig Carrier : Self propelled 4-Axle Power : Detroit Diesel Engine Model: 12V71 – 396 HP Torque Converter : Allison TC 955 Year of Manufacturing : 1966 Draw works Model : IDECO H35 ED Drilling line : 1” Sand line : 9/16” Mast Type : Telescoping, hydraulically Model : KM-90/95-180 GH Capacity : 180,000 lbs Height : 90-95 ft Hook capacity : 82/71 T – 6 lines 71/62 T – 4 lines Hook Block Combo Make : IDECO // SBS Model : EFB 108 Type 5 Ser. No : 133 Capacity : 95 Ton Sheaves : 3 x 1’’ Sub structure Length : 4600 mm Width : 2530 mm Height : 2055 mm A manual with drawings concerning the Rig is available. www.e-t-i.nl For more information: sales@e-t-i.nl ...
Location: Middenmeer, The Netherlands Date Posted: Monday, December 19, 2016
Condition: Needs recondition Price: Upon your request
view details
For Sale: 225T Complete Mobile Drilling Rig - Ready to Drill
MAST Type: Telescopical Height: 118feet - 36m Static Max. Capacity: 225ton Max.Working Capacity: 200ton DP Capacity: 3000meters with 4 1/2" DP DRAWWORKS Make: China Kerui Type: JC28/11D Max.Power: 1000hp Main Drum: 1168x267 mm , ATD 330H Clutch model Cable OD: 1 1/4" (32 mm) Max. Pull Capacity: 28ton Max. Speed: 450RPM Cooling: Water witk 7.5kw engine Sand Drum: 970x210 mm ATD124 Clutch model Sand Line: 9/16" (14,5 mm) 3000 m Total Weight: 12513 kg Dimensions: 3006x3397x1610 mm Main Drum Gear and Chain: 5x 77 , 1 ¾’’ (44,5 mm) Input Gear and Chain: 4x47, 1 ½’’ (38 mm) Hydraulic Brake: Ural marsh FH 46’’ Max. rotation speed 450 RPM Engine Power: 2 x GM 8V92T 475 HP 2100 RPM Transmission: 2 x CLBT5960 allison, 534HP 2500 RPM Draw-Connection: 2 x Garden Shaft SUBSTRUCTURE Overall Dimensions: 6,25x7,8 m Type: Pin type, floor and rotary support Height: 16.4 ft (5 m) Free Height Under Rotary Beams: 13 ft (4 m) Set Back Capacity: 225 ton Casing Capacity in Rotary Table: 225 Tons irrespective of the set back capacity CROWN BLOCK Make: Shandong Kerui Model: TC 225 Sheaves number and size: 6 x 915 mm OD, 32 mm line Sand line sheave: 1 x 500 mm OD, 14,5 mm line Max Hook Load Capacity: 225 Tons TRAVELING HOOK BLOCK Make: Shandong Kerui Model: YG-225 Sheaves number and size: 5 x 915 mm Max Hook Load Capacity: 225tons Hook opening length: 190mm SWIVEL Make: Shandong Kerui Model: SL225 Capacity: 225 Tons Speed: 300 RPM Max. working pressure: 5000 psi Capacity: 6 5/8’’ L REG, 4’’ LP ELEVATOR LINKS Dimensions and capacity: 2/3/4 x 92” (235 cm) , 250 Tons ROTARY TABLE Make: Upetrom Model: MRL-275 rotary table 27 ½” opening dia. Capacity: 500ton Max rotation speed: 300rpm MASTER BUSHING Make: Upetrom Model MASTER BUSHING INSERTS: 2 ea. KELLY DRIVE BUSHING Make: Baash Ross Model: 27 2RCS4 GENERATOR SET Make: 2 x Aksa Model: Quite Cabin Power: 300 KW DRILLING AND SAND LINE Drilling Line: 1 ¼” 6*19 IWRC 3000 ft DEAD LINE ANCHOR Type: Hercules HA118T MUD PUMPS (2) Make: Qinqzhou Petroleum Model: 2 x QZ3NB 800 Triplex Max.SPM: 130 Liner Max-OD: 180 mm (7,1") Liner Min-OD: 130 mm (5,1") PSI min: 1740 psi PSI max: 3335 psi GPM max: 637gpm GPM min: 372gpm Pulsation Dempener: 4’’ Dis. Flange,5000 psi, 2 ea. MUD PUMP MOTORS (3) Make: GM Detroit diesel Model: 3 x GM 16V-71T HP: 725 RPM: 2100 Transmission: Allison CLBT-5961,534 HP,2500 RPM MUD TANKS SYSTEM Sand Trap: 40 bbl Cleaning Tank: 120 bbl, 1 agitator, 1 mud gun Storage Tank: 200 bbl 2 agitator, 2 mud gun Suction Tank: 250 bbl 2 agitator, 2 mud gun Mixing Tank: 120 bbl 1 agitator, 1 mud gun, 2 hopper Total: 730 bbl Agitators: 6 x Electric Motor, YB2 132M, 7,5 Kw, 220/380v,1450 rpm, 1/10 ratio ex proof motor Hopper mixing: Model HCP8X6X14, 240m3/h, centrifugal pumps 2 ea, 55KW ex proof motor, 50 hz 2207380 V 1750 rpm. Pump and motor on a skid Water Tank: 120 bbl Water pump: 2x1 hyrdafor system FUEL TANKS Capacity: 32000 liter MUD MIXING & CONTROL EQUIPMENT Shale Shaker: 2 each Brandt King Cobra Linear 4 range Screen mesh type: BHX-AT XF 50 & 80 Mesh Angle: Adjustable from-7 degrees, 0-3 degrees Drive: 2 each, 2,5 hp, 50Hz,190/380 volt 3 phase ex-proof Desilter, Desander, Mud Cleaner: Derrick FLC-503 High ‘’G’’ Shaker, 380V50Hz Desander: 2x10’’ Desander cones Desilter: 4’’x16 Desilter cones Mud Cleaner: PMD500DX-A120 screens Centrifugal Pump and Motor: 2 ea HCP model 6x8x14 55 KW exproof,50Hz, 220/380 volt motor, 1750 RPM centrafugal pump and motor unitized on a skid Suction Manifold: 8” Low Pressure MUD TESTING EQUIPMENT Rig Laboratory: 1 set Stainles Steel Cabinet Mud Balance: 1 each Marsh Funnel Viscosity: 2 each Fluid Loss Cell kit: 1 set Wall Mount Filter Press, Air manifold, Regulator Assembly, victor for nitrogen pressure, 200 and 3000 psi Gauges Sand kit: 1ea. Retort Analysis: Retort kit, 10 ml, 230 volt Viscosimeter: Rheometer, hand Crank, Two shear 600 and 300 RPM, plus gel STANDPIPE Size: 4" Working Pressure: 5000 psi No: 1 ROTARY HOSE Size: 3 1/2" Working Pressure: 5000 psi Lenght: 60’ 1 each DRILL PIPE 4 1/2" DP: 16,60 lb/ft G-105 4" IF x 300each HWDP 4 1/2" HWDP: 41 lb/ft 4" IF x 15each DRILL COLLAR 8" DC - 6 5/8 REG: 13each 6 1/4" DC - 4 1/2 XH : 25each 7 3/4" DC - 6 5/8 REG: 8each STABILIZER 26" INTEGRAL BLADE STB: 1each 17 1/2" STB : 1each 12 1/4" STB : 4each 8 1/2" STB : 4each 6" STB: 2each SLIPS Drill pipe slips: 3 1/2" - 4 1/2" - 5" Drill collar slips: 2each Safety Clamps : Available for DC sizes Lifting Subs: Available KELLY - 2 Sets 4 1/4"- 4 1/2 XH: 1 ea , 40’ overall, 37’ working length 5 1/4"- 5 1/2 FH: 1 ea , 40’ overall, 37’ working length POWER TONG Make : Yancheng Teda Model : TQ340/35YA Unit make: Yancheng Teda Model: YZBF-120LD Air cooled hydraulic power unit DRILLING INFORMATION RECORDER Hook load: Yes ROP: Yes Mud Pump Pressure: Yes Rotary Torque: no BOP Make: Upetrom U type Ram: 13 5/8”x 5000 psi Hydrill: 13 5/8”x 5000 psi Ram type : 21 1/4" BLOWOUT PREVENTER CONTROL PANEL Make: UPETROM CHOKE MANIFOLD Type: 3 1/8" AIR COMPRESSORS Make: Aydin trafo, 2 each WELDING EQUIPMENT Electric Units: Hobart M 300 Oxyacetelene: Yes AUXILIARY BUILDINGS Ware House Yes Electrical House Yes Mecanic House Yes Welding House Yes SAFETY EQUIPMENT Fire Extinguishers Available First Aid Kit Available Derrick man Escape Line Available CASING HANDLING TOOLS 20” ELEVATOR Available 13 3/8” ELEVATOR Available 9 5/8” ELEVATOR Available 7” ELEVATOR Available CEMENTING EQUIPMENTS Batch Mixer 300 bbl Pump ACF 700 Triplex Cementing head Available VEHICLES Crane 1 each 25 ton Pick-up 2 each HIGH PRESSURE WATER CLEANING Make Aydin Trafo Model ATSC200 DRIFT RECORDING INSTRUMENT Make FORUM (USA) Model TM-511 16 and 8 degree inclination Recorder Type Clock CHOKE MANIFOLD Make Jiangsu yangbiao petroleum machinery co. Ltd Model PO: 1209GS02REV1 Type 2 9/16" 5000 psi FISHING TOOLS 9 5/8" OD OVER SHOT, 264 COMPLETE ASSEMBLY , 6 5/8" REG CONN. 1 ea 8" SPIRAL GRAPPLE 3 ea 8" SPIRAL GRAPPLE CONTROL 3 ea 8" MILL CONTROL PACKER 2 ea EXTENSION SUB, LENGTH 42" 1 ea 7 1/2" BASKET GRAPPLE 1 ea 7 1/2" SPIRAL GRAPPLE CONTROL 2 ea 6 1/4" BASKET GRAPPLE 2 ea 6 1/4" MILL CONTROL PACKER 2 ea 5" BASKET GRAPPLE 3 ea 5" MILL CONTROL PACKER 2 ea 4 1/2" BASKET GRAPPLE 3 ea 4 1/2" MILL CONTROL PACKER 2 ea 16 1/2" OVERSIZE GUIDE 1 ea 8 1/8" OD OVER SHOT, 5342 COMPLETE ASSEMBLY, 4 1/2" IF CONN. 1 ea 6 1/2" SPIRAL GRAPPLE 1 ea 6 1/2" SPIRAL GRAPPLE CONTROL 1 ea 6 1/4" SPIRAL GRAPPLE 3 ea 6 1/4" SPIRAL GRAPPLE CONTROL 3 ea 5" BASKET GRAPPLE 2 ea 5" MILL CONTROL PACKER 2 ea 4 3/4" BASKET GRAPPLE 3 ea 4 3/4" MILL CONTROL PACKER 3 ea 4 1/2" BASKET GRAPPLE 3 ea 4 1/2" MILL CONTROL PACKER 2 ea 3 1/2" BASKET GRAPPLE 2 ea 3 1/2" MILL CONTROL PACKER 2 ea 2 7/8" BASKET GRAPPLE 2 ea 2 7/8" MILL CONTROL PACKER 2 ea EXTENSION SUB , LENGTH 36" 1 ea 11 1/4" OD OVER SIZED GUIDE 1 ea 5 7/8" OD OVER SHOT, 5171 COMPLETE ASSEMBLY, 3 1/2 IF CONN. 1 ea 5" SPIRAL GRAPPLE 3 ea 5" SPIRAL GRAPPLE CONTROL 3 ea 4 1/2" SPIRAL GRAPPLE 3 ea 4 1/2" SPIRAL GRAPPLE CONTROL 3 ea 4 1/4" BASKET GRAPPLE 2 ea 4 1/4" MILL CONTROL PACKER 2 ea 3 1/2" BASKET GRAPPLE 2 ea 3 1/2" MILL CONTROL PACKER 2 ea 2 7/8" BASKET GRAPPLE 1 ea 2 7/8" MILL CONTROL PACKER 1 ea EXTENSION SUB , LENGTH 48" 1 ea 7 7/8" OD GOTCO REVERSE CIRC. JUNK BASKET 4 1/2 IF, MILL SHOE TYPE B, GOTCO COMPLETE ASSEMBLY 1 ea JUNK CATCHER FOR ABOVE ITEM 3 ea MILL SHOE FOR ABOVE ITEM 1 ea 11" OD GOTCO REVERSE CIRC. JUNK BASKET 6 5/8 REG, MILL SHOE TYPE B, GOTCO COMPLETE ASSEMBLY 1 ea JUNK CATCHER FOR ABOVE ITEM 3 ea MILL SHOE FOR ABOVE ITEM 1 ea 15" OD GOTCO REVERSE CIRC. JUNK BASKET 6 5/8 REG, MILL SHOE TYPE B, GOTCO COMPLETE ASSEMBLY 1 ea JUNK CATCHER FOR ABOVE ITEM 2 ea MILL SHOE FOR ABOVE ITEM 1 ea CAMP EQUIPMENT Living Container 8 ea Restaurant 2 ea Kitchen 1 ea Locker Room 1 ea Office 1 ea ...
Location: Izmir, Turkey Date Posted: Sunday, December 18, 2016
Condition: Good Price: 2,350,000.00
view details
For Sale: New Schramm T500XD 760HP Drilling Rig
Click to View Additional Photos & Details. Contact Dan Henderson at +1-281-661-3627.
New Schramm T500XD 760HP Drilling Rig
  • 500,000 lbs. (226,796 kg) hook load rig in a portable over the road package 80,000 lbf. (356 kN) hydraulic pulldown for precise weight on bit control Control cabin with joystick controllers for drilling and pipe handling operations Self-erecting in a matter of hours without the use of a crane Power breakout, table and slips maximize safety on the drill floor LoadSafe XD hands-free Range III pipe handling system included POWER UNIT (2) MTU 12V-2000 engines, 760 bhp (567 kw) @ 1,800 rpm with electric start (2) Dual core, side by side cooling package, 130°F (54.4°C) ambient rating (2) 220 gallon (930 l) diesel fuel tanks (2) Hydraulic pump systems, with each including (8) piston pumps and (1) gear type pump (1) 1,000 gallon (3,785 l) hydraulic tank with (18) twin element filters SUB-BASE AND WALKING SYSTEM Floor Height: 22 ft. (6.7 m) Clearance: 19 ft. (5.8 m) under table bushing Ground Pressure: • Dead Load: 26 psi (1.8 bar) • Live Load: 57 psi (3.9 bar) • Walking, mast down: 41 psi (2.8 bar) A dedicated diesel engine, hydraulic pump and 750 gallon (2,839 l) hydraulic tank are included with the system TELEMAST SYSTEM Top Head Travel: 56 ft. (17.07 m) Hook Load: 500,000 lbs. (227,227 kg) actual Hoist Speed (both Engines): 0-130,000 lbs. @ 136 fpm (0 - 58,967 kg @ 41m/min) 101,000 – 285,000 lbs. @ 106 fpm (45,813 – 129,274 kg @ 32 m/min) 286,000 – 305,000 lbs. @ 100 fpm (129,727 – 138,346 kg @ 30 m/min) 306,000 – 419,000 lbs. @ 76 fpm (138,799 – 190,055 kg @ 23 m/min) 420,000 – 500,000 lbs. @ 64 fpm (190,509 – 226,796 kg @ 20 m/min) Pulldown Capacity: 80,000 lbs. (36,363 kg) Pulldown Speed: 0-180 fpm (0 – 55 m/min) loaded, 0-200 fpm (0 – 61 m/min) free head TILTING TOP DRIVE Power: 950 bhp (708 kw) Rotation Speed: 0-140 RPM Rotation Torque: Up to 35,000 ft-lbs (47,454 N-m) Swivel: 3 inch (7.6 cm) cartridge style Fluid Pressure Rating: 5,000 psi (345 bar) RIG FLOOR 37.5 inch (0.95 m) false table adapter and a 27.5 inch (0.7 m) Master Bushing 22 ft. (6.7 m) floor height 19 ft. (5.79 m) under table clearance HYDRAULIC ROUGHNECK Clamping Range: 4.5 – 9.625 inches (11.43 – 24.45 cm) diameter Clamping Force: Adjustable up to 61,500 lbs @ 3,000 psi (273 kn @ 208 bar) Make/Break Torque: 60,000 ft-lbs @ 3,500 psi (81,349 N-m @ 241 bar) LOADSAFE® XD PIPE HANDLING Built-in holding clamps with variable capacity from 4 - 24 inches (10 – 61 cm) allow for make-up or break-out of tool joints from the top drive spindle Capacity: Range III Maximum Lift Capacity: 10,000 lbs. (4,536 kg) Average Trip Time: 1,500+ f/h (457+ m/h ) MAIN WINCH Bare Drum Pull: 9,600 lbf. (42.7 kN)) Bare Drum Line Speed: 150 fpm (46 m/min) Hydraulic jib boom swing and extend STANDARD ACCESSORIES Water injection system, 35 gpm (132.4 lpm) @ 1,000 psi (69 bar) DTH lubricator up to 5 gph (19 lph) @ 1,000 psi (69 bar) Air manifold for air drilling operations Air/mud fluid lines, 4 inch (10 cm) stand pipe and traveling hose for 5,000 psi (345 bar) operation Explosion proof 240V lighting for nighttime operation (customer supplied generators) BOP handling system, carriage and trolley rated 40,000 lbs. (18,144 kg)
Click to View Additional Photos & Details. Contact Dan Henderson at +1-281-661-3627. ...
Location: United States Date Posted: Friday, December 16, 2016
Condition: New Price: Contact For Pricing
view details
For Sale: Drilling rig IDECO M1200
IdecoM1200 RIG TYPE Mechanical NOMINAL DRILLING CAP. WITH 5”-19.5#/ft D.P. 12,000Ft (3650 m.) WITH 3./2”-15.5#/ft D.P. 15,000Ft (4600 m.) DRAWWORKS NOMINAL POWER 1200 HP. MAX. STATIC HOOK LOAD (with 10 lines) 570,000 LBS 1) MAST MAST MAKE-TYPE DRECO BUILT AS PER API STANDARD NO API 4-E CLEAR HEIGHT OF MAST. M 41,4 USE SINGLE-DOUBLE TRIPLE LENGHT. : TRIPLE MAXIMUM API RATED STATIC HOOK LOAD WITH FULL SETBACK LOAD, WIND LOAD OF 115 KM/H AND MAX. NUMBER OF LINE STRUNG. MTON 260 MAX.LINES STRUNG ON TRAVELLING BLOCK NO 10 UPPER PART OF MAST PAINTED FOR DAY SIGNALLING TO AIR-NAVIGATION YES/NO YES RED LIGHTS AS PER REGULATION ON TOP OF MAST 2) RACKING PLATFORM RACKING PLATFORM MAKE-TYPE : DRECO RACKING PLATFORM CAPACITY OF 5" D.P : 4000M RACKING PLATFORM CAPACITY OF 6.1/2"D.C : 300M RACKING PLATFORM CAPACITY X D.P RANGE. : 5” AND 3”1/2 IN RACKING PLATFORM CAPACITY X D.C RANGE.: 8 “– 6”1/2 – 4”3/4IN HEIGHT FROM RIG FLOOR : 26 M DERRICKMAN WIND BREAKS : YES WIND BREAKS TYPE AND HEIGHT: YES DERRICKMAN ESCAPE DEVICE : YES CASING STABBING BOARD MAKE-TYPE: MASSARENTI STABBING BOARD ADJUSTABLE FROM TO : 6 : 12 M-M 3) SUBSTRUCTURE SUBSTRUCTURE MAKE-TYPE: DRECO SUBSTRUCTURE BUILT AS PER API STANDARD: API 4 – E API RATED SETBACK LOAD CAPACITY: 203 MTON API RATED ROTARY LOAD CAPACITY: 272 MTON API RATED SIMULTANEOUSLY LOAD CAPACITY OF SETBACK&ROTARY: 475 MTON DRAWWORKS & ACCESSORIES: IDECO M 1200 DRAWWORKS AUXILIARY BRAKE : PARMAC MOD 342 A TOP DRIVE ASSEMBLY: BOWEN TD 350 P ROTARY TABLE: IDECO 275 MUD PUMPS: (2) 1000HP Well Control Crew Quarters BOP CONTROL SYSTEM: KOOMEY T20-200-3S MUD SYSTEM 240 CUBIC METER C/W SUPERCHARGING CENTRIFUGAL PUMP DETAILED SPECIFICATION ON QUALIFIED REQUEST...
Location: Alessandria, Italy Date Posted: Wednesday, December 14, 2016
Condition: used, cold stacked Price: 950.000 euro
view details
For Sale: 1000HP RIG BR-1
Specs: Mast 1 2006 BHL 131’ high, 550,000 hook load, 5 section mast with accessories. (5) Sheave cluster & (1) fast line sheave grooved for 1 ¼” line. Racking board, ladder, tong counterweights, derrick climber, 4” standpipe and manifold. Substructure Box on box substructure 22’W X 19’ H X 49’ L with pony sub, rotary beams, V-door ramp, (3) stairs, safety rails, (2) 200 gal. air receiver tanks. Draw works 1 TFI-1000M single drum draw work, with Eaton 236 Disk brake auxiliary brake, powered by (2) C-15 diesel engines with Twin Disc F-11516 TC torque converters and all accessories, connected by TFI double engine in line oil bath compound. Power Generation System 1 DMT 670-C 600 Kw AC generator powered by Cat. 3412 diesel engine with complete accessories. 1 LIMA 625 Kw AC generator powered by Cat 3412 diesel engine with complete accessories. 1 General electric switchgear panel. (1) Federal Pacific 45 KVA transformer. (1) Curtis RS30B rotary screw 30 hp. air compressor. (1) Fuel day tank, skid mounted (1) Group of electrical distribution cables, with 10 electric suitcases housed in 8 x 10 x 40 utility house. Drilling Tools (1) 3750’ new 1 1/4” drilling line (1) Continental Emsco RA-36 250 Ton Block/hook combination with 5 sheaves. (1) Set of two 108” elevator links. (1) National N-69 300 Ton swivel. (1) 6” o.d. lower Kelly cock (1) 6” o.d. TIW valve (1) VARCO Kelly drive bushing, with rollers and pin drive. (1) National 27 1/2” rotary table with split bushings. (1) International Tools OWI 1500 pneumatic Kelley spinner. (1) International Tools OWI 35C7 pneumatic drill pipe spinner. (1) Set of two Webb Wilson type B rotary tongs with assorted heads. (1) 3 ½” X 60’ Rotary hose (2) 3 ½” X 20' Vibrator hoses (2) 8” X 10’ Suction hoses (1) Group of gages and instrumentation units. (1) Bear 500,000 lb. Double dial weight indicator. (2) Drill collar safety clamps. (1) Mud bucket (1) Satellite automatic driller. (1) Star 4-pin drilling recorder. (1) Rat hole and mouse hole. (9 5/8” Mouse hole) (1) Group of elevators and slips of various types. Well Control (1) CPC 5-station closing unit w/triplex pump, powered by TESCO 20 hp. electric motor, two airdriven hydrolic pumps, 145 gallon reservoir tank, 12 bottles, gauges, lights, mounted on 6’ X 12’ skid. (1) 4-station remote closing unit. (1) Regan 11” X 3000 psi. annular BOP (1) 5000psi. manifold group, skidded. (1) BOP spool, bolts, nuts, ring gaskets, piping, and other support units. Mud Circulation System (2) FES MZ-9 1000 hp. triplex mud pumps w/forged steel fluid ends, quick change caps, 5000 psi pulsating dampener, Mission 5X6 charging pumps, with accessories and support units, each powered by Cat. 398 diesel engines with accessories. Skidded on three runner skids. (1) 411 barrel suction tank, w/ 6’ covered porch, 2 X 7.5 hp. mud agitators, internal plumbing, flat bottom, top mounted walkways, safety rails, lights, skidded, mud trough, 2 each Baker 5” X 6” centrifugal mixing pumps powered by 2 50hp electric motors, mud mixing hopper, chemical mixing barrel, emergency shower and eye wash station. (1) 411 barrel shaker tank, w/ 6’ covered porch, 2 X 7.5 hp. mud agitators, internal plumbing, flat bottom, top mounted walkways, safety rails, lights, skidded, mud trough, duel Vortex Orbital 3000 single screen, linear motion shale shaker. Baker 5” X 6” centrifugal pump powered by 50hp. electric motor, with Vortex desander w/ 2 X 6” cones. Baker 5” X 6” centrifugal pump powered by 50hp. electric motor, with Vortex desilter, w/ 6 X 2” cones. Rig Fabrication (1) 8’ X 20’ top mounted dog house w/ 6 lockers, storage bench, microwave, heater and lights. (1) 8’ X 40’ lower dog house, with parts compartment, 12 lockers, shelves, work benches, eater, lights, skidded. (1) 500 barrel rectangle shape water tank w/ two 1 ½” X 2” centrifugal water pumps powered by two 5 hp. electric motors. (1) 8000 gallon cylindrical fuel tank, with 3 compartment oil lubester built in, skidded. (6) sets of triangle pipe racks (12) (1) 4’ X 35’ X 8’ equipment carryall (1) 5’ X 42” X 48’ single section catwalk, with hinged steel v-door attached (5) 8’ X 37’ X 4’ pipe boxes Drill Collars 25 joints of 6 ¼” od, 31’ , 99 lb. per ft. drill collars, with collar lift subs. Please call 832-962-8196 or 832-831-5856 for pricing and availability or email at sales@svoilfieldservices.com ...
Location: Houston, Texas Date Posted: Monday, December 12, 2016
Condition: Used Price: $265,000.00
view details
Next >
Last >>

>> Do you have surplus equipment to sell?  Post an ad on Rigzone.com and start receiving leads today.

         

         

         

         

         
view all featured companies
become a featured company
Events  SUBSCRIBE TO OUR NEWSLETTER

Our Privacy Pledge
SUBSCRIBE