ZJ20 Model 650 Truck Mounted Rig
|
| Listing ID: 8976 |
Date Posted: 1/7/2009 |
Ad Type: For Sale |
 |
|
Location: |
|
Houston
|
|
Price: |
|
Call for Pricing
|
|
Condition: |
|
Brand New
|
|
|
ZJ20 (model650) Truck-mounted Rig
1 Rig ZJ20
1 set Main unit "Main unit is self-propelled, which includes self-propelled carrier,engnie,transmission system, transfer case, angle gear box, double-drum drawworks,rotary table, pneumatic water-cooling auxiliary brake,chain driving device, mast system,crown block assembly, double telescoping cylinders, double raising cylinders, double hydraulic winches, hydraulic & pneumatic system,operating system, electrical system, ship base etc. drilling depth: 2000m(f4 1/2"DP)
max.hooking load: 1600kN5×4 traveling system:5×4 "
"hoisting speed:0.2-1.3m/s
main wireline dia.:f29mm
mast height:35m
substructure height: 4.5m moving way:self-propelled "
"max.road speed:45km/h
overall dimension: 20.4mx3mx4.4m "
1. 1 set Carrier "drive way: 12×8
max. speed: 45km/h
slope angle: 30%
approaching approch/departure angle:26°/18°
min. clearance: 311mm
turning radius: 19m. including cab,axle,frame,auxiliary frame, four hydraulic jacks and steering mechanism, tool box, mud guard and safety rail, backward alarm etc. "
1.1 1 set Frame CJ-01 including corssbeam assembly, front boarding, mud-guard, raising cylinder bracket and beam of hydraulic jack, two feul tanks.
1.2 6 pcs Axle CQ the axle is 13-ton axle, with four driving axle,two suspension axels with brake cylinders of single/double air chamber
1.3 20 pcs Wheel "18-22.5
12-20" the front three axles are single-wheel, the rear three axles are double-wheel
1.4 1 set Steering Mechanism including steering pump, steering cylinder, steering rod and steering lines,steering auxiliary pump and pipelins etc.
steering hydraulic system including:steering pump, check valve, overflow valve, oil pipe,joints, sucking oil pipe, back oil filter assembly
1.5 1 set Suspension axle one to six suspension system
1.6 1 pcs Cab snigle driver, single door
1.7 4 pcs Hydraulic jack Y3030B whole rig hydraulic jacks assembly
1.8 1 set Tansmission shaft CDZ table transferring shafts
2. 1 unit Engine C18 "power:630HP
rotating speed:2100r/min"
3. 1 unit Transmission S6600 "six forward and one reverse
power :710HP"
4. 1 set Drawworks JC21A/11 rated input power:500kw
rated input rotating speed:450r/min
max. fast line pull force: 210kn
drum diameter×width:450*912mm(spooled)
brake type:band+auxiliary brake
crown saver: crown o matic
inner circulating cooling brake
including:aixal pushing clutch of main drum, chain, wireline stablizer, sand drum, guard, anxiliary brake water tank, inner circulating cooling water tank,circulating water pump, pipeline and brake system, centralizing lubricating.
5. 1 unit Angle gear box JCX130B max. Torque:13kn.m
6. 1 unit power divider FDX140B "Max. torque:14kN.m
max. Input rotating speed:2100r/min "
7. 1 unit Auxiliary brake WCB224 Max.rotating speed:1500rpm braking power:604kw
8. 1 set Mast JJ15835 icluding upper and lower sections second floor table uprising syetem double telescoping hydrautic cylinders loading system guiding system loading and wind proof lines guard rails escaping device vertical piples and rectifying setting type:doule section,front open,3°front tilted, hydraulic raising and telescoping. max. hood load:1580kn
efficent height: 35m capacity of racking board: 2000m(4-1/2" DP) racking board height:17.5 20.5 21.7m 110km/h
9. 1 set Substructure DZ160 "setback capacity:2000m(4 1/2"" DP)
max.load:1600KN
height:4.5m
floor size:5×7m2
space under rotary table beam:3.7m
six vertical shaft, fodable. Rotary table seat and setback seat separated"
10. 1 set Rotary table ZP175 "conform to API Spec 7K
open hole diameter:17 1/2"
max. load:2250kN
max. rotating speed:300r/min"
11. 1 set Rotary table drive box ZPX110B max torque:11kN.m
12. 1 set Pneumatic system "max. pressure:0.85MPa
inluding: all types of vavles and pipelines"
13. 1 set Hydarulic system "max. pressure:14MPa
inluding: pipelines and joints"
14. 1 each set Hydraulic winch YJ5, YJ3 rated hoisitng weight: 50kN/30kN rated wireline capacity: 100m/80m wireline diameter:f15mm/f13mm
15. 1 set Drect Current system including: starting electric circuit, instrument electric circuit, lighting circuit, steering and controlling circuit.
lighting system Including: front lighting assembly, fog penetrating light, steering light, back small light, instrument light etc.
1 set alternating current system
PTO Assembly
16. 1 set Travelling system "main wireline diameter:f29mm
max. hook load:1580kN type: 5×4"
16.1 Crown blcok TC160B OD and No. of pulleys:f915×5
16.2 Travelling blcok OD and No. of pulleys:f915×4
16.3 Hook block double-hooked, max hook load:1600kN
17. 1 pcs Wireline f29 conform to API Spec 9A 1000m
18. 1 set Swivel SL160 max. static load:1600kN
19. 1 pcs Hose 3" "17m long
working pressure:35mpa"
20. 2 set Hydraulic cat Y15160 "connecting force of cat head:50kN
disconnecting force of cat head:100kN
stroke:1600mm"
21. 1 set Weight indicator system JZ200
22. 1 set DP slide
23. 1 set Driller console
24. 1 set substruture wheels are on the substruture
25. 1 set Painting
26. 1 set Assembling & testing perform max. load capacity test
27. 1 set Tools along with the rig
|
|
Equipment Photos:
|
|
|
|
|
|
|
|
|