Back to job search

DOT Truck Driver - Pump

Updated: Nov 4 2013
Desired Expertise: Heavy Machinery Operator
Experience: 3+ years
Minimum Education: High School/Secondary
Location: Guymon, OK, US
Reference Code: 130000VL
Job Status: Closed - No longer accepting applications
Work Authorization: None
Job Description:


The Pump (Kill) Truck Operator drives and operates the Pump (Kill) Truck hauling various oil field related fluids to kill and or control the flow of oil and gas wells. These fluids are picked up at various locations and transported to various field locations to be used in well servicing and drilling operations. These fluids include fresh water, brine (salt) water of various weights, KCL water, various drilling fluids (mud) and packer fluids. At the well location, the Pump (Kill) Truck Operator will operate the equipment of the truck to "Kill" the well, according to procedures established by the customer and the manufactures of the equipment, to keep the well under control and flowing back to the surface during well service operations.

1. The Pump (Kill) Truck Operator drives the Pump (Kill) Truck to the locations to load/unload fluids as required by the job. Opens valves used to load fluids from the station to the truck with the use of the truck's transfer pump.
2. This position requires the employee to pull hose(s) from the truck's hose tray and connect one end of the hose to the truck and the other end to the load valve.
3. The position requires monitoring of the amount of fluid required for the job based on the type fluid requested by the customer, the amount of fluid the truck is lawfully allowed to haul, and other requirements.
4. The position will require the driver to maintain accurate work tickets based on the Company and customer's requirements, maintain accurate driving log books, and pre-trip/post-trip inspections. This position is responsible for alerting appropriate supervision when mechanical defects are noted on the truck as well as alerting supervision when work hours may exceed DOT maximums.
5. Understanding basic maintenance concepts is required for this position to perform light to heavy repairs as may be required. All brake work performed on the vehicle will require the driver to have the proper brake certification. This position requires the use of hand tools and other associated equipment for this vehicle.
6. This position requires the ability to wear the following personal protective equipment to including safety glasses, face shields, goggles, ear muffs/plugs, hard hat steel toe boots, SCBA (Self Contained Breathing Apparatus), H2S detectors, slicker or TYVEK chemical suits and gloves.
7. Performs and assumes other duties and responsibilities as may be required by immediate supervisor.
8. Performs the primary thinking called for and encompassed by the overall Position Definition.
9. Adheres to Company policies and work requirements.

Desired Skills:
• Pass the company's drug screen.
• Pass the company's "Physical Functions Assessment".
• Motor vehicle record qualifies individual to be an approved company driver.
• Acceptable criminal history.
• Ability to read, write and speak English to the extent that they are able to understand verbal and written instructions as well as give verbal and written instructions in English; and the ability to use simple mathematical calculations using whole numbers, fractions and decimals (addition, subtraction, division and multiplication) to make job related calculations.
• Heavy Work- Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly to move objects. Physical Demand requirements are in excess of those for Medium Work.
• This position requires standing, walking, and sitting while working either indoors or outdoors.
• While performing the job, will be required to lift/carry, pull/push, reach, squat, kneel, and or climb ladders or stairs.
• Must have a valid class A commercial driver's license with the proper endorsements required for the type vehicle operated, issued by state of residence.
• Must have the applicable knowledge of DOT rules and regulations as required for the position.
• Must have the basic knowledge of the oil field and related equipment associated with the trucking and pumping of oil field fluids.
• Working conditions for this position may involve exposure to varying environmental conditions. This may include chemicals, gases, cold/heat, noise, dampness, dust, fumes, radiation and heights. Exposure to the above conditions should be handled as prescribed in the Company's Accident Prevention Handbook and/or the Company's Standard Operating Procedures

Employment Type: PERMANENT

This Position Is Closed to New Applicants

This position is no longer open for new applications. Either the position has expired or was removed because it was filled. However, there are thousands of other great jobs to be found on Rigzone.

Similar Jobs Currently Available
Oilfield Operator - Frac Water Heating
Employer: Enservco
Location: Carmichaels, US
Material Handler - Scott, LA
Employer: NALCO Champion, An Ecolab Company
Location: Scott, US
Texas Hot Oil Truck Operators - Signing Bonus Available
Employer: Enservco
Location: San Antonio, US
Hot Oil Truck Operator - North Dakota
Employer: Enservco
Location: Killdeer, US
Other Jobs that might interest you
Oilfield Operator - Frac Water Heating
Expertise: Heavy Machinery Operator|Truck / HGV Driver|Well Servicing & Testing
Location: Carmichaels, PA
Material Handler - Scott, LA
Expertise: Heavy Machinery Operator|Materials Management |Warehouse Person
Location: Scott, LA
Texas Hot Oil Truck Operators - Signing Bonus Available
Expertise: Heavy Machinery Operator|Truck / HGV Driver|Workover or Completion
Location: San Antonio, TX
search for more jobs

Our Privacy Pledge